in this video I will show you how to assemble the sixth series model 165 by moducase and the new figure stands they made. we also check out how collectibles look inside.
Would it be difficult to put feet on this? I'm only getting one and would like to lift it 4 inches or so. Thanks for the videos - super helpful. I wish they had an acrylic top for these as well. I'm doubt I'm skilled enough to fashion one.
they would be just a few millimetres in thickness. I cant measure them now without taking a case apart. I'll remember to do that next time I have a case show up tho
hey, so I would look into the weight before you mount them on top of each other, you would want them into studs for sure, I would make sure both cases are supported by the mount
hi i was wondering if its ok to have the sixth165 on a smaller length desk with the cases sides hanging off the desk like that? i cant find any desk that fits the length so i want to use the one i already have
Nice details and tips. I'm sure it'll come in handy when I receive my DF120 in a few months :) BTW since you're focusing on 1:6 figures, if you ever want to get rid of you Link on Epona let me know :P
Hey man Moducase case is pretty dope and nice collection btw May I ask 2 questions? I got some idea about I really want to stack 3 case of 165 series it that possible? And other one is I want to use raiser do you know any recommendations for that case if you have time please let. Me know thanks and great video
I apologize if I missed it, but do the front panels lock or secure in any way? Also how sharp are the edges? The wife is on a baby proofing spree.....lol
you would have seen that in an earlier video. new one coming soon for a collection update so I'll show that with any other questions you have? but it does have a screw too hold it in place. the rails do have Sharp edges but you're only likely to scratch yourself while putting it together. if you don't put the case in a " high traffic area" so you're not walking past it a lot, then its no issue.
@@thecollector7347 one more question, can you tell me what the interior depth is? I'm wondering if the 1/6 Batmobile would fit in that. Its 16 inches wide.
they would be visible at the top, on the bottom the base hides the holes, when stacking them it would be helpful to do them on top I suppose, but I haven't had an issue with them all going on the bottom, little sticky tac and the wires hid really easy
Love that Ada Wong in your collection. Very expensive nowadays.
super happy to have her. I grew up on resident evil
Just ordered 4 of these can’t wait to get them! Glad I found this video! Definitely going to use this for reference!
awesome. if you need help when you get it, let me know.
I know I am kind of randomly asking but does anyone know a good website to watch new movies online ?
@Korbyn Carson Lately I have been using FlixZone. Just google for it :)
@Michael Onyx Yea, been using Flixzone for months myself :)
@Michael Onyx Thank you, I went there and it seems like a nice service :D I appreciate it !!
Would it be difficult to put feet on this? I'm only getting one and would like to lift it 4 inches or so. Thanks for the videos - super helpful. I wish they had an acrylic top for these as well. I'm doubt I'm skilled enough to fashion one.
moducase offers risers for any of the display cases they make! check out their site
Love your setup!!! Can you tell me what is the thickness of the backpanel and the plexi glass/arcylic?
they would be just a few millimetres in thickness. I cant measure them now without taking a case apart. I'll remember to do that next time I have a case show up tho
It is possible to wall mount 2 of these stacked one above the other with 4 brackets only? Planning to put perfect grade Gundam only. No statues.
hey, so I would look into the weight before you mount them on top of each other, you would want them into studs for sure, I would make sure both cases are supported by the mount
hi i was wondering if its ok to have the sixth165 on a smaller length desk with the cases sides hanging off the desk like that? i cant find any desk that fits the length so i want to use the one i already have
As long as most of the case is on a desk, and nothing heavy is on the sides of the case that's hanging over the edge, it should be fine
@The Collector thank you ill try that and just put the lighter figures on the sides
Nice details and tips. I'm sure it'll come in handy when I receive my DF120 in a few months :)
BTW since you're focusing on 1:6 figures, if you ever want to get rid of you Link on Epona let me know :P
you will love it.... hard times would have to hit me to let that statue go, but I will keep you in mind :)
@@thecollector7347 Haha I hear you. BTW your TMNT figures are really cool.
BadAsss 👌🏻👌🏻 I ask u question Sixth series 165 can put on the wall?
yes! you can
@@thecollector7347 Thank you 👍🏻
Hey man
Moducase case is pretty dope and nice collection btw May I ask 2 questions?
I got some idea about I really want to stack 3 case of 165 series it that possible?
And other one is I want to use raiser do you know any recommendations for that case if you have time please let. Me know thanks and great video
hey! you can stack 3 of those on top of each other no problem, and moducase now offer risers! so you can have the perfect fit for those
I apologize if I missed it, but do the front panels lock or secure in any way? Also how sharp are the edges? The wife is on a baby proofing spree.....lol
you would have seen that in an earlier video. new one coming soon for a collection update so I'll show that with any other questions you have? but it does have a screw too hold it in place.
the rails do have Sharp edges but you're only likely to scratch yourself while putting it together. if you don't put the case in a " high traffic area" so you're not walking past it a lot, then its no issue.
great video, can you tell me whats the interior height? wondering if i can fit a thanos throne in there..
just under 17 inches inside. if you need more height you'd goto the DF series
@@thecollector7347 one more question, can you tell me what the interior depth is? I'm wondering if the 1/6 Batmobile would fit in that. Its 16 inches wide.
17 inside, so you're good to go. it would Also fit very easy into a DF120
Can this be attached to wall with nothing below it?
yes, they sell the mounting hardware. pictures on their Instagram to
Which LED strips do you think work best for these displays?
I used pure white
@@thecollector7347 Do you have a brand name or is that it?
@@harrisonscroggins3249 moducase is it
are we able to order these seperate? i got one of these cases and it didnt come with lights
when you put in the back boards, why don't you put the holes to the top, then you don't need to run the cable up the inside?
they would be visible at the top, on the bottom the base hides the holes, when stacking them it would be helpful to do them on top I suppose, but I haven't had an issue with them all going on the bottom, little sticky tac and the wires hid really easy
@@thecollector7347 makes sense - just order my fist sixth 110 for above a door in my office
@@thecollector7347 thanks for the vid by the way, love it
Are there any sizes that are half of this one?
you can order custom ones, check their site for all different cases they do offer
At 35:05, does that bottom board come with the order?
yes, all cases come with these