I fly FPV drones for fun. Thank you for talking about the reasons your drone is better than others on the market. I loved hearing your story. Keep up your great work, and continue using science and research to better your products. I am certain it will pay off!
And this is one of the things that need to be used in the SAR enviorment, carry defibrilators and other med supply that can be deployed before medics and during water rescues where floating devices can be deployed.
Absolutely beautiful! One question. At about 1:42 in the video you show the battery tray being mounted to the bottom, but I noticed a decent amount of wobbly from that even when it was clamped down (as they plugged it in). Wouldn't that be really bad?
After you plugged it in you close the clamp and its going to be rock solid. This is a piece by freefly and used on all sets for movies and other payloads, so its very solid even it seems so. I was also skeptical :)
The capability of your drone is amazing. Congrats. What about a video collaboration where you are going to catch us in-flight for an Air2Air shooting in our single engine Aircraft? Everything above 500ft. above ground and speeds between 72 - 130kts would work for us. We are based in Switzerland. Would love to hear from you guys.
Very interested in obtaining this Startruss Drone , but my only question is if with a cine camera it lasts 9-10 min , how long will last with a standard gopro 12 ?
Think of the time of a typical shot…. seconds. Ten minutes is a lifetime! It is not best to wait in the air where one can’t swap batteries or SD cards while the rest of the crew resets a shot. In tightly timed sequences, the pre positioning of assets (camera rigs of all types) is critical.
0:00 You have a red foam on your Goggles 2. Can you link to that? I've been pretty unhappy with the fit (nose mostly) of the original foam and the replacements I've found to date. I haven't seen that particular one yet. Can you provide any details or is just a different color of the OEM thing? And...Sorry to drag this a totally mundane direction. Amazing stuff.
Maybe at later stage. As we use specific components we know they work and tuned it very well we want to enaure the best flight performance. Often time when you sell frames people then still ask questions as they use different components and struggle with the tune. I just want people to have the best experience 🥳
I love everything but the fact it’s a bnf and your using lumineer 100amp esc instead of apds which are the standard for such large motors with heavy payloads like that I’m not trying to have an electrical spike and my 11,000 dollars fall to the ground in a ball of smoke other than that good design but Chris rossers drone that I can build with components I like and trust is much more suitable you make a frame I can just buy this will be the better option till then ✌🏼
Well we stress tested the lumenier and even helped them to find there production issue 😂 apds use their own software which you hopefull know is not so easy with betaflight. Lumenier has blheli32 which works great with betaflight. Fuether the drone builsing time is faster and easier and you dont need to configure each eac and lose hours. We used queenbee and startruss for couple of weeks and put them under big stress tests, so far all gucci 🤓🙏 sometime you have to expand the pie and look for other options. Not alwas what others are doing is the best. We try to be innovative and look for the best solutions. Last but not least apds are out of stock so we don‘t like waiting for ever 🤩💪🤓
@@EllisvanJason I will agree apd needs to either step it up or open source their software cause yeah they suck with software and compatibility in general
As a person trying to invent myself after this crazy pandemic.. I've been in the searrch for a drone outside of the usual DJi stuff! But those drones are amazing, i can only imagine what they would cost when available? Well done, great story and awesome drones!!
I also like Karearea drone frames because they also use vertical trusses for arms as you do. But they make drones of entirely different class, they are much smaller with much less payload than yours. Keep up the great work!
Really like the startruss 11". Man if I got drone business going for some high speed chasing cars. I was looking for a 10" to build for it. I have a guy wants me to get ready to do drift car events next year see what happens
If they want to compete in this field, they should be more focused on making products that are more user friendly and less diy. This looks more like diy, like the BlackSheeps were.
All cars have 4 wheel. A drone is a drone. We don’t copy. We test different things and pic what works best. Btween his and our designs, there are difference 👌
@@EllisvanJason yes, you are right, you reinvented the wheel, by saying you made something unique, when there seem to be a dozen frames that utilize truss reinforcement, and and x frame. aerodynamic, then strapping a box like camera on top or bottom. all so that you could charge a 2000 premium on your drones, well done.
Not just cinematography, but war too. Anti-personnel mines are attached to simplified modifications and such a product is sent to enemy combat groups. This is already a reality.
Can we maybe take a step back and not always see the bad side? We are cinematographer so they drone are built to film 💪 pls no political discussions here, we wont get anywhere 😇🙏
Can we maybe take a step back and not always see the bad side? We are cinematographer so they drone are built to film 💪 pls no political discussions here, we wont get anywhere 😇🙏
Lets not compare apples with tomatos. There is a difference betqeen fix wing and multi rotor. I rather have a slower moving object that bringa agility, thrust and can do vertical movements. Wixed wings would limit you a lot in terms of camera angels. Same with helicopters and planes
@@EllisvanJason Its because you think in actual plane wings. What i sugest you is DISK with turbofan or propelers where you only close the vents to take direction. Yo can make movement at 90º faster than drone(moving north and rapid change to the east dont moving the altitud or make inclination just open a vents. If you dont make it, i will try it in my channel.
No! These drones are for creating art and beautiful pictures and are not designed to pick a side and make damage. Let‘s not get political in these comments 😘
Yes cinematography. These are expensive specialty drones designed for smooth fast efficient camera operation. Don’t assume all fpv is for weaponry. That’s ignorant of the hobby, and the professional side. Hollywood pays a lot of money for camera equipment and is already all in on fpv cinematography.
Its a big drone which carries very expensive kit and needa to be top notch. Shall I explain you how much the parts are you would be suprised? Or shall I share all the money we spend on development over the last 4 months to get the drones to the point they are now 🤓✌️
Also its not 7k for DIY, instead this is when we build and tune it for you. Do you want to fly a red & movi with expensiv lens and focus motor and a 1k drone? ✌️
@@EllisvanJason i was being sarcastic to Dr. Adam, i know well the challenges and craftmanship needed to build such cinelifters. Keep up the good work!
Okay so I see you have used Chris Rosser's truss design style to base your design. Sure intelligent hot swap batteries and a metallic camera mount are good design choices for professional customers. But frames that have been tried and tested are already out there which support a red komodo. It will be a lot more convincing once someone compares your product with those.
Did not copy chris at all. Why should we 😅 I believe our design is more advanced and has much more than just a truss. Truss is a basic structure. If you think chris invented it, you are wrong 🤓 vertical arms is not something new, and so truss. Also our truss is different and soon will be more complex so we move fast and we dont beed to copy others 😎💪 well then bu the other frame if you want to get 4-5 min flight time and lots of sag 😂👌 just flew 9 min with a 90-100km/h so in my opinion this changes so much 🚀
@@EllisvanJason impressive. Well yeah I know Chris didn't invent trusses. I didn't say you copied per se learning from his findings is nothing wrong. Did you mean to say your setup has no sag ? How is that being avoided. Are you getting some special battery chemistry or is your setup low current draw.
Once you enter the prof space, you can buy that without any problem 😊✌️ its your daily working tool. I always so far invested a lot of money back into gear. Lets gooo🤩
@@EllisvanJason yeah man hopefully one day will be able to get one of these beasts! Currently investing all my money back into quads but only got a 5, 7.5 and 2.5 inch right now with hero 11’s. Would definitely love to invest into a professional camera and cinelifter like this in the future! Keep up the amazing work man! 🙌❤️
@@decfpv thats awesome dude! All you need to start and grow. At the end of the day you as pilot and your cinematic eye is what pushes you and not just the gear, you can create amazing pictures with a simple camera ✌️🚀 best of luck
We seriously need better battery tech yesterday. That's the only thing holding back a lot of technologies being developed so far. But then again, i think it's the military that will have access to those a few years before consumers can obtain them.
Yes at 10kg payload. If you fl with a small gimbal and cam, much more. This is a high end drone for high end productions and 4min for that is a really good number, I know it looks low but at 10kg on top of the drone weight, thats something
Looks a lot like the drones I built a year ago for Nascar. Nice to see more people actually engineering structure into frames instead of just drawing shapes and playing Tetris with the components like most of this industry. Well done.
@@EllisvanJason It's not available to the public unfortunately, but the core structure of the design is a similar concept and it works extremely well. Been running it for a year now and it's been solid AF. I guarantee there will be a lot more split-arm designs in the future as more people catch on and actually start engineering legit, strong, and lightweight airframes instead of just making components work together. It's clear you guys put a fair amount of thought into yours which is refreshing to see in an other-wise stale market.
One more question/comment and I might have no idea what I am talking about, but I noticed you are using the Lumenier 4 in 1 ESC instead of separate APD ESCs. Most other cinelifters that I have researched seem to be running the APD ESCs. Is this set up better, the same, or worse?
Apd was almsot the only one. Now new players enter the market. Bl heli32 based esc are so easy to setup and well integrated in betaflight. Also flew the lumenier for couples of weeks and no issue 😎✌️works perfectly on startruss 🚀
its to save on money, installing separate escs would make it easier to fix any problems that may arise from a hard days use, but 4 in 1 escs are cheaper than individual escs
Епт, наконец додумались не увеличить толщину лучй, а сделать обычную ферму, которая даст жёсткость по вертикальной оси, а треугольное распор двух ферм даст жёсткость пор горизонтальной оси. А то уж думал что железнодорожные мосты,никого не надоумят использовать эту конструкцию.
Well 4 min if you have 10kg payload. You get much more if you have a little ronin on top 😂 you bearly feel the gimbal. I was blown away by the power and possibilities this goves us
Thumbs up for exploring 13-inch props. I am also testing out 13-inch cinelift props from my previous 19-inch helicopter blades. My single rotor is only 250 grams, but all trend curves indicate that 13-inch props have highest endurance and optimal for motor weight for 250 gram single-rotor drones.
Josh and I introduce you Startruss and Queenbee the new 2RAW drones. For all questions, drop a comment 👌
Flight time and payload weight for queen bee and startruss?
Payload and & Max Battery Pack Capacity
Wen will this drone be available..??
@@vineethraj3033 now
@@bobbystech you can load up to 10kg
I fly FPV drones for fun. Thank you for talking about the reasons your drone is better than others on the market. I loved hearing your story. Keep up your great work, and continue using science and research to better your products. I am certain it will pay off!
So nice of you 🚀💪🙌
This is epic!! Well done guys 👏
Thanks so much brother 😊🚀
And this is one of the things that need to be used in the SAR enviorment, carry defibrilators and other med supply that can be deployed before medics and during water rescues where floating devices can be deployed.
Lets gooo
@@EllisvanJason I'll DM on mail
Woah! Awesome! Stellar! Super speed! Bravo! 😎 Bravo indeed!
🙏
dang well done guys 🙌🏻
Thanks so much Matti! Let us know if you ever want to test one 😉🚀
Bold statement. Can't wait to see more testing, footage, trials and bloopers.
Thanks mate 💪🚀
Absolutely beautiful! One question. At about 1:42 in the video you show the battery tray being mounted to the bottom, but I noticed a decent amount of wobbly from that even when it was clamped down (as they plugged it in). Wouldn't that be really bad?
After you plugged it in you close the clamp and its going to be rock solid. This is a piece by freefly and used on all sets for movies and other payloads, so its very solid even it seems so. I was also skeptical :)
@@EllisvanJason Ahh okay! Thanks for the response!
beautiful!
Have you had a 4k live stream with this drone? If so what you used to send the signal down to a ground station?
Amazing Video, well done!
Wow those look awesome. Keep
Pushing the technology limits. rad sharing primo work guys.
Very impressive!
This is awesome!
Thanks mate ✌️
Hello, great, could you give us the link to the antennas of your Googles 2? Do they improve the video signal?, thank you!!! 👍
The capability of your drone is amazing. Congrats. What about a video collaboration where you are going to catch us in-flight for an Air2Air shooting in our single engine Aircraft? Everything above 500ft. above ground and speeds between 72 - 130kts would work for us. We are based in Switzerland. Would love to hear from you guys.
Thank you
looks amazing!!
Unreal quality of video, like an fpv
that thing is terrifying
Wow both of them look absolutely incredible 👍
Thanks mate 🙌😇
Very interested in obtaining this Startruss Drone , but my only question is if with a cine camera it lasts 9-10 min , how long will last with a standard gopro 12 ?
just wow
I'm seriously interested in these drone! Would love to discuss with you guys in more details
Amazing!
Thumbnail says "217,000mph".
Hilarious stuff.
Really? 👀
Awesome. Look forward to trying them out especially the ease of swapping payloads from top to bottom
Yes so quick! If you have 4 batta this makes it efficient
I love the intro Audio ... have a big setup ..subs and monitors and its FUN haha
Haha 😂
I can't wait to buy this😍😍🔥
💪🙏🚀
Wow! nice drone!
thanks so much dude
Awesome
Not familiar with cinema drones. Is it normal that they have flight times of less than 10 min? Queen bee has only 4 min according to the website.
10 min is crazy long for a cinema camera lifter. So far they flew half as much usually.
Think of the time of a typical shot…. seconds. Ten minutes is a lifetime! It is not best to wait in the air where one can’t swap batteries or SD cards while the rest of the crew resets a shot. In tightly timed sequences, the pre positioning of assets (camera rigs of all types) is critical.
This looks epic 🔥
MASHAALLAH khub valo technology video review.....!
Make it aerodynamic, then pub a cube on top of it 😅
Exactly! But air moves different around the cube depending on angle and just because the cube is not effective, the drone doesnt need to be as well 😂🙏
i think US DoD want 10000 of this drone
Sounds and looks Amazing our company will be looking into your products for future upgrades ✌🏼
💪 sound good. Just ping us snd we are happy to supprt
What FPV receiver antennas are you using, brand and dbi?
O3 and crossfire 🙌
Man these look badass 🔥 would love to take one of these for a spin!
0:00 You have a red foam on your Goggles 2. Can you link to that? I've been pretty unhappy with the fit (nose mostly) of the original foam and the replacements I've found to date. I haven't seen that particular one yet. Can you provide any details or is just a different color of the OEM thing? And...Sorry to drag this a totally mundane direction. Amazing stuff.
This is Josh’s creation 😂
@@EllisvanJason So he just built up a custom face foam? I'm clearly not crafty enough. Thanks.
Love what you’re doing. Well done 👍
Still waiting for you 😂✌️🚀
Would you guys sell just the frames at any point?
Maybe at later stage. As we use specific components we know they work and tuned it very well we want to enaure the best flight performance. Often time when you sell frames people then still ask questions as they use different components and struggle with the tune. I just want people to have the best experience 🥳
AWESOME!!! I want one!!!! Looking forward to this being available soon...
Cheers mate! They are available 🚀 on the website you have all infos
Now that's a clean looking cinelifter series.
I love everything but the fact it’s a bnf and your using lumineer 100amp esc instead of apds which are the standard for such large motors with heavy payloads like that I’m not trying to have an electrical spike and my 11,000 dollars fall to the ground in a ball of smoke other than that good design but Chris rossers drone that I can build with components I like and trust is much more suitable you make a frame I can just buy this will be the better option till then ✌🏼
Well we stress tested the lumenier and even helped them to find there production issue 😂 apds use their own software which you hopefull know is not so easy with betaflight. Lumenier has blheli32 which works great with betaflight. Fuether the drone builsing time is faster and easier and you dont need to configure each eac and lose hours. We used queenbee and startruss for couple of weeks and put them under big stress tests, so far all gucci 🤓🙏 sometime you have to expand the pie and look for other options. Not alwas what others are doing is the best. We try to be innovative and look for the best solutions. Last but not least apds are out of stock so we don‘t like waiting for ever 🤩💪🤓
@@EllisvanJason I will agree apd needs to either step it up or open source their software cause yeah they suck with software and compatibility in general
@@EllisvanJason okay other thing will it ever be a stand-alone frame option that I can build up ?
@@terpsquirter7107 yes very soon we release
@@joshuahenriques3224 wonderful will be on the lookout for it 💪🏻🤙🏼
Awesome! Logs look fantastic! 👍
Great work with the drone, this vid audio mix isn't good though, background too loud
These for sale somewhere?
On website in bio 💪
As a person trying to invent myself after this crazy pandemic.. I've been in the searrch for a drone outside of the usual DJi stuff! But those drones are amazing, i can only imagine what they would cost when available? Well done, great story and awesome drones!!
Very very impressed and innovative 👍🏼👍🏼👍🏼 congrats for such an amazing work
Thanks a ton 😊🙏
Frames are looking great! From the Queen bee's parts list, it says 1x Battery Tray with Toad in the hole female
What is "Toad in the hole female" ?
Toad in the hole is a quick release system developed by FreeFly Systems, 10 years ago...
Its the mounting system between the red part and battery
Excellent battery swap design… Nice lookin’ quads too! Impressive indeed!
Thanks a lot Jeff 🙏
I also like Karearea drone frames because they also use vertical trusses for arms as you do.
But they make drones of entirely different class, they are much smaller with much less payload than yours.
Keep up the great work!
Thanks mate, appreciated
sick
for real
Thanks guys 🙏🚀
Flight times are extremally low.
No 😂 much more than we had. 9 minutes with a cinema camera is long. 4 min with 10kg is a lot. If you fly with rohnin rs3 and cam its much longer 🚀
I will buy one. Sick drone Ellis!!!, 💪💪
Text us via website so we can best assist you 👌🤓
Really like the startruss 11". Man if I got drone business going for some high speed chasing cars. I was looking for a 10" to build for it. I have a guy wants me to get ready to do drift car events next year see what happens
Thanks mate! Sound sick! You can put on 10’’ props 👌😊
cc25b
Siiiiiick dude 🔥🔥🔥🔥
Aww, missing you mate already! Cannot wait for your success in Dubai! A great human left CH :)
Can’t wait to rip em’ 🔥🔥🔥
you know speeding up the video in post does the same thing in many cases...
Which video is speed up? 😂
@@EllisvanJason no im saying you can use a slower platform, film at a higher fps and achieve the same effect as as a fast drone but in post
@@EllisvanJason sped up*
нормально
Use AI to produce structures. Which doesn't compromise on strength to weight.
Already on it 🤓 but you don’t need AI for that even 💪
when you stop using velcro strap I will watch your video again.
Feel free to add whatever you want 😎💪
If they want to compete in this field, they should be more focused on making products that are more user friendly and less diy. This looks more like diy, like the BlackSheeps were.
FPV drones are always DIY style as people want that. Its niche thing, the others have djis fpv products 👌👼
Damn only 7000 pounds
I wanna buy the 11" frame.....
releasing v soon!
these drones looks similar to the ones designed by Chris Rosser ua-cam.com/video/BlIEqnbHjoU/v-deo.html
All cars have 4 wheel. A drone is a drone. We don’t copy. We test different things and pic what works best. Btween his and our designs, there are difference 👌
@@EllisvanJason yes, you are right, you reinvented the wheel, by saying you made something unique, when there seem to be a dozen frames that utilize truss reinforcement, and and x frame. aerodynamic, then strapping a box like camera on top or bottom. all so that you could charge a 2000 premium on your drones, well done.
if you need someone who does test flights with them i would be ok with doing it :D 🔥🔥🔥🔥🔥
✌️😎
Brother I need a drone for shoting, i already have go pro 10 , can you help me , I am from India assam❤ , kindly share buying link
Get out my website for BoB57
Not just cinematography, but war too. Anti-personnel mines are attached to simplified modifications and such a product is sent to enemy combat groups. This is already a reality.
Can we maybe take a step back and not always see the bad side? We are cinematographer so they drone are built to film 💪 pls no political discussions here, we wont get anywhere 😇🙏
Can we maybe take a step back and not always see the bad side? We are cinematographer so they drone are built to film 💪 pls no political discussions here, we wont get anywhere 😇🙏
its stil slow. until you make it as plane to generate lift wings and not with propelers.
Lets not compare apples with tomatos. There is a difference betqeen fix wing and multi rotor. I rather have a slower moving object that bringa agility, thrust and can do vertical movements. Wixed wings would limit you a lot in terms of camera angels. Same with helicopters and planes
@@EllisvanJason Its because you think in actual plane wings. What i sugest you is DISK with turbofan or propelers where you only close the vents to take direction. Yo can make movement at 90º faster than drone(moving north and rapid change to the east dont moving the altitud or make inclination just open a vents.
If you dont make it, i will try it in my channel.
Such a shame it's a swiss company.
Hahah appreciate you like my country 🤓😂
@@EllisvanJason "your" as if Van Jason was a swiss name... 😂😂😂
well...
6min of flight time is a joke.
It more its 9min on with red komodo. You can fly craz long range. I flew up 2km with my red and 3 km away 🚀🙌
Looks like if a Ferrari and an X class had a baby 👶🏻
Hahah nice! 🤓
These drones could help change the war for the good in Ukraine. ✌🏼🇺🇦🌍
No! These drones are for creating art and beautiful pictures and are not designed to pick a side and make damage. Let‘s not get political in these comments 😘
Fpv Is cool but regular drones will always be king
Both no? Cannot really compare them. So different if you ask me ✌️☺️
cinmetography? pretty sure it'll be extensively "tested" in ukraine
Yes cinematography. These are expensive specialty drones designed for smooth fast efficient camera operation. Don’t assume all fpv is for weaponry. That’s ignorant of the hobby, and the professional side. Hollywood pays a lot of money for camera equipment and is already all in on fpv cinematography.
can you drop granades from this drone?
Are u kidding me 🤣😂 7000 $ for DIY racing drone
Its a big drone which carries very expensive kit and needa to be top notch. Shall I explain you how much the parts are you would be suprised? Or shall I share all the money we spend on development over the last 4 months to get the drones to the point they are now 🤓✌️
7000$ for a small surgery, are you kidding me haha!
@@orfeaskalafatis this drone was a big surgery 😅 we wont make that much money afrer all the parts, building, tuning and development time & fees.
Also its not 7k for DIY, instead this is when we build and tune it for you. Do you want to fly a red & movi with expensiv lens and focus motor and a 1k drone? ✌️
@@EllisvanJason i was being sarcastic to Dr. Adam, i know well the challenges and craftmanship needed to build such cinelifters. Keep up the good work!
Just use the dji fpv, no one will tell the difference.
😂 riiiighty. Depends who you working with/for
also music so cool, like in Deus ex Machina game🤩🤩🤩
Okay so I see you have used Chris Rosser's truss design style to base your design. Sure intelligent hot swap batteries and a metallic camera mount are good design choices for professional customers. But frames that have been tried and tested are already out there which support a red komodo. It will be a lot more convincing once someone compares your product with those.
Did not copy chris at all. Why should we 😅 I believe our design is more advanced and has much more than just a truss. Truss is a basic structure. If you think chris invented it, you are wrong 🤓 vertical arms is not something new, and so truss. Also our truss is different and soon will be more complex so we move fast and we dont beed to copy others 😎💪 well then bu the other frame if you want to get 4-5 min flight time and lots of sag 😂👌 just flew 9 min with a 90-100km/h so in my opinion this changes so much 🚀
@@EllisvanJason impressive. Well yeah I know Chris didn't invent trusses. I didn't say you copied per se learning from his findings is nothing wrong. Did you mean to say your setup has no sag ? How is that being avoided. Are you getting some special battery chemistry or is your setup low current draw.
@@aakashjana6225 12s reduces current draw and only 4 motors... much less stress per cell
without a doubt one of the most amazing and beautiful drones I've ever seen!
😱
Is it Queen or Qeen? It's Qeen in the video at the end
Thats a typo 😂✌️
Wish I could afford a quad like this it looks awesome 👏🔥
Once you enter the prof space, you can buy that without any problem 😊✌️ its your daily working tool. I always so far invested a lot of money back into gear. Lets gooo🤩
@@EllisvanJason yeah man hopefully one day will be able to get one of these beasts!
Currently investing all my money back into quads but only got a 5, 7.5 and 2.5 inch right now with hero 11’s. Would definitely love to invest into a professional camera and cinelifter like this in the future!
Keep up the amazing work man! 🙌❤️
@@decfpv thats awesome dude! All you need to start and grow. At the end of the day you as pilot and your cinematic eye is what pushes you and not just the gear, you can create amazing pictures with a simple camera ✌️🚀 best of luck
@@EllisvanJason thanks man really appreciate the advice! ❤️
Make em open source
Not everything need to be open source! You can buy it and clone it tho if you want 🙏😎
We seriously need better battery tech yesterday. That's the only thing holding back a lot of technologies being developed so far.
But then again, i think it's the military that will have access to those a few years before consumers can obtain them.
I agree. I can’t wait for the day laser powered drones etc. become available to the general public. Unlimited flight times hopefully coming soon🤞🤞
I think batteries are quite maxed out. Maybe it more the motors getting more efficient 😂 we went 12s for better performance 🚀🤓
These are seriously impressive🎥
Thanks so much!
These drones look great but QueenBee has a flight time of 4 min and a pricetag of 7,000 GBP. No thanks!!!
Yes at 10kg payload. If you fl with a small gimbal and cam, much more. This is a high end drone for high end productions and 4min for that is a really good number, I know it looks low but at 10kg on top of the drone weight, thats something
Looks a lot like the drones I built a year ago for Nascar. Nice to see more people actually engineering structure into frames instead of just drawing shapes and playing Tetris with the components like most of this industry. Well done.
Ah really? Where can I find your drone? 😇
@@EllisvanJason It's not available to the public unfortunately, but the core structure of the design is a similar concept and it works extremely well. Been running it for a year now and it's been solid AF. I guarantee there will be a lot more split-arm designs in the future as more people catch on and actually start engineering legit, strong, and lightweight airframes instead of just making components work together. It's clear you guys put a fair amount of thought into yours which is refreshing to see in an other-wise stale market.
Cara que sensação que é voar esse tipo de drone deve ser maravilhoso
que maquina em!
One more question/comment and I might have no idea what I am talking about, but I noticed you are using the Lumenier 4 in 1 ESC instead of separate APD ESCs. Most other cinelifters that I have researched seem to be running the APD ESCs. Is this set up better, the same, or worse?
Apd was almsot the only one. Now new players enter the market. Bl heli32 based esc are so easy to setup and well integrated in betaflight. Also flew the lumenier for couples of weeks and no issue 😎✌️works perfectly on startruss 🚀
its to save on money, installing separate escs would make it easier to fix any problems that may arise from a hard days use, but 4 in 1 escs are cheaper than individual escs
Епт, наконец додумались не увеличить толщину лучй, а сделать обычную ферму, которая даст жёсткость по вертикальной оси, а треугольное распор двух ферм даст жёсткость пор горизонтальной оси. А то уж думал что железнодорожные мосты,никого не надоумят использовать эту конструкцию.
13,000 Australian dollars and 4 minute flight times... Does it come with batteries? :-)
Well 4 min if you have 10kg payload. You get much more if you have a little ronin on top 😂 you bearly feel the gimbal. I was blown away by the power and possibilities this goves us
Game changing drones! I have a feeling they’ll be used on movie sets around the world 🎥
Thanks bro! Well I hope they give it a try and feel the difference 🤓🙌
Thumbs up for exploring 13-inch props. I am also testing out 13-inch cinelift props from my previous 19-inch helicopter blades. My single rotor is only 250 grams, but all trend curves indicate that 13-inch props have highest endurance and optimal for motor weight for 250 gram single-rotor drones.
I'd buy one. What flight controller (hardware and software, both) do each of these use? That footage looks great!
Absolutely mind blowing brother 🥵 Ich kann da zwar nicht viel mitreden, aber sieht auf jeden fall nach Qualität und sehr sexy aus 👌🏽
🙏 danke bruder! Hoffe bei dir alles klar
Wer hat's erfunden? Die Schweizer. Wer genau? Ric... 2Raw... looks like a fine machine you made there.
Vielen dank 😂💪