Can You Use Glock Gen 5 Magazines In A Gen 3
Вставка
- Опубліковано 5 сер 2023
- Glock Gen 5 Magazines work perfectly in Glock Gen 3
Gen 5 Magazines have an orange follower and the baseplate is curved but Glock Gen 3 baseplates will fit.
#glock #glockfan #glock43 #2a #2ndamendment
Join this channel to get access to perks:
/ @progun45 - Спорт
For everyone coming here for the same question.. the answer is, yes. The gen 5 magazines will fit your gen 3 glock 19. Pro gun recommends them over his gen 4 and 3 mags as well. Thanks for the video 🙏🏼
Welcome brother.
Thx for the info on the Glock 19. I assume the answer to my question is yes, but please comment. Does the gen5 mag fit a gen3 Glock 17?
@@ozzy0225 Yes, you are correct
Do you know if the Gen 5 single stack magazines will fit the Glock 26 Gen 3 for us Californians? I contacted Glock about it and they said the G17 gen 5 mags fit G19,G26,G45,G47, and G49. But I think they meant the 17 rounders. I’ve seen only one video about it and a comment said that if you hold the magazine just a little bit it will jam and all that so I’m just curious if it’s even compatible and if it is then will it be reliable. Thanks in advance.
Thanks brothers
The only exception is the 19x. The gen 5 mags will not fit it, without changing or modifying the base plate. Just for the 19x owners out there.
Thanks for the info brother.
Nice video. Thanks for sharing
Thanks Brother
The only thing for me is I had to shove it in. The regular gen 3 mag smoothly sits in, but the gen 5 (for my G19 Gen 3) mag requires a little tab or shove - other than that - works fine
That is one amazing cerakote job
The Glock came in that way, I didn't send it out.
That's a pretty finish on your gun, and being a glock owner, I don't say that a lot, lol
Well thanks Brother
I just bought a gen 5 13 rd 40sw mag for my G23 and it came with an orange follower.
That seems to be the trend now. Some use yellow.
Do you have a gen 3 23glock?
Do you have a Glock 23 gen 3?? I have the same .. haven’t used the mag yet but I want too..
Do gen 4 22-33 .40 mags work in gen five Glocks specifically a 27, I’ve been
Searching and google says they’re incompatible but I’ve seen people saying otherwise and I saw I video of someone shooting one
they will work but you may have to change the baseplate
I just got a gen 4 g26 and picked up a 17 rd mag for it but when I got home I realized they gave me a gen 5 17 rd mag. Will the gen 5 mag work in my gen 4 or should I exchange it?
It will work.
I got a Glock 23c will this apply to that as well
Yes, it applies to all Glock models
Will a gen 5 glock 19 mag fit a gen 3 glock 26? Thanks in advance
It accepts Glock 17 and Glock 19 magazines.
@@progun45 thank you
@@progun45 why you didn't just say no? 😂
Where the best place to buy gen 5 Glock 30 mags ?
gunmagwarehouse.com
if i got a gen 3 glock 19 will a gen 5 24 round fit it
Yes it will
Did it fit? I got the same setup wondering
How ab Vice versa will gen 3-4 mags work for a gen 5 via the 22rd one?
Gen 3-4 mags all work in a gen 5
@@progun45 Thank you! Been looking for the answer for a couple weeks now,just been unsure answers soo I appreciate this alot💯 got a gen5 27 that I didnt wanna waste money on mags that wasn't going function properly,so I do appreciate it,subbed
Yes but not ambidextrous mag release will not work @@HbkChazz
@@progun45Thank you. I'd just pin this answer. Gen3 & 4 mags fitting in the newer Gen5 is the question that got us here.
I'm having a problem with my Poly80 build. Gen 3 parts, I think I got a few MecGar mags, not sure what Gen. They always fail to feed the last round because the follower pushes the slide stop up while the last round is still in the mag. Is this a problem with the mag or should I modify the slide stop tongue?
Don't mess with the mags. What gun is it?
@progun45 It's a P940C. Modeled on the Glock 19. I think the follower tilts. I'm not sure. I bought a glock brand mag today so I'll see if that does the same thing. If it still pushes the slide catch up before the last round is fed, do you have any advice?
@@krow7402 I would take it to a local gunsmith. Seems something isn't aligning.
@@progun45 I'm the only gunsmith in town. Small town. And I'm just a hobby gunsmith, self taught. I've wanted to become Glock certified, it could be good money in this area. Lots of Glocks, no Glock armorers.
I can insert an empty magazine with the slide locked back and I can see the follower in the mag touching the slide stop. Now, it should do that because the mag is empty. But with one round in the mag, it still lifts the slide stop just like if the mag was empty.
@@krow7402 Sorry Brother, I don't know what to tell you on this.
Can we use gen 4 mag to glock gen 3 Sir?
Yes you can. The new Gen 3's ship with Gen 4 mags.
@@progun45 thank you sir.
@@campkawayan5283 Any time brother
Gen 5 fit Gen 4 also?
Yes Gen 5 fits 3 and 4
So will a Glock19 gen5 magazine fit in a Glock19 gen3?
Yes it will. You may need to change the baseplate to a Gen 3 or 4 baseplate but the Mag will work with no problems.
@0:38 the single Gen 3 notch is only on the RIGHT hand side of the magazine. These will not work in Glock models with the ambidextrous magazine release. Otherwise, great video.
Thanks brother
So what your saying is I can't use a gen3-4 rd mag in my gen5 27? I've always wondered
@@HbkChazz No, I'm saying you can use any Gen Mags with a Gen 5 as long as you don't switch the mag release.
Yep, notch it’s on the right side.
Gen 3 mag notch is on the right side…
You can still use Gen 3 mags in a Gen 5
@@progun45 as long as it’s setup for right hand mag release, sure