Spraying uPVC with PaintNuts uPVC Paint
Вставка
- Опубліковано 26 сер 2024
- uPVC spraying with PaintNuts uPVC paint.
This video is all about using PaintNuts uPVC paint. I'll demonstrate how to apply it with my Qt5 HVLP sprayer and a standard brush. It's essential to read the instructions before use. Although the directions suggest cleaning brushes with white spirit, I found this ineffective and had to use cellulose gun cleaner/thinner instead. Be sure to watch until the end, where I summarise my mistakes and advise on how you can avoid them.
on amazon
Paintnuts 1ltr uPVC paint (green) other colours available
amzn.to/3KlQV1h
I now have a Amazon StoreFront*, please have a look.
www.amazon.co....
Check me out on the other Social Media sites
FaceBook
www.facebook.c...
Instagram
/ beckwithdecorators
Don't forget to Subscribe to the channel
www.youtube.co...
Please Support The Channel either with SUPER THANKS via UA-cam
or
Buy Me A Coffee/Pizza/Beer
www.buymeacoff...
* The Legal Bit*
* The links to Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do as I'm part of the Amazon Associate programme. I have to make you aware; as an Amazon Associate I earn from qualifying purchases.*
Looked a good finish brushed. Spray finish looked acceptable so don’t be so hard on yourself tad more thinner like you say would have got you the finish you were wanting. That’s how we learn by trying different methods.
Well done Phil.
Thank you Phil... 👍
Welcome!
Keep up the good work mate
Thanks, will do!
Phil.love your channel nd thanks for making these videos. Off topic, but which Sundstrom filters do you use? Thinking of trying a different system to the 3m one I'm using. Kindest, Matt
on my channel, the search bar is your best friend ;)
ua-cam.com/video/as2HCZoznII/v-deo.html
Hi Phil great vid, what thinners did you use? just the cellulose that is used for cleaning as well? cheers
Yep.
All details are in the video :)
So Phil, now we have tested is it Paintnuts, Frenchic, Kolorbond, MSP or Allcoat? Also do you reckon you would get a passable finish with a low end Wagner HVLP sprayer as I a,ready Ian one. As I DIYer don’t want to splash out on equipment that will only be used once or twice
This is awesome as a brush and roll uPVC paint out of the can. Nothing to thin. Just coat up after a good clean down.
It's not water based so can't compare to all coat or MSP or Frenchic.
But which would you choose if asked to paint upvc?
@@johngibson540 KolorBond Original.
But the 2k Pentura uPVC paint is very good as well.
@@ProfessionalPainterDecorator Obviously for spraying what about brush and roller?
@@johngibson540 see my previous answer ;)
Uncle Phil
Would it work on a composite 'grained' door?
yes, I can't see why not.
Hi Phil could you suggest a primer to put on emulsion walls that are bubbling after they are painted
What paint did you go over and what paint did you use?
@@ProfessionalPainterDecorator midsheen over it self
@@kevinohare7917 do they pull out when dry
Yes they can be busted
Hi Phil
Got some walls with very fine hairline cracks
Like a spiders web
Too many to rake out and fill
Was going to Gardz it first to tighten the wall up then two coats of diamond Matt
Do you think cracks will come through
Customer don’t want lining paper and can’t afford to re plaster
What upvc product would you use for spaying for a paying customers
KolorBond, as I've used that more and had super dooper results
This is the best for Brushing though, for anyone wanting to do that.
@ProfessionalPainterDecorator have you tried selemix yet?
Can you store paint that you’ve already added drier to?
What do you mean by Driers?
Are you meaning with oil based paint?
You're not referring to using this paint?
@@ProfessionalPainterDecorator sorry, yes oil based paint, using rustins driers :)
@@scottshipley570 yeah. You're not using a lot and it'll dry when in the air, so a sealed can should be fine.
Phil, be careful taking a whiff of anything cellulose based. It's massively carcinogenic and will also shred your lungs. Put my best mate in an early grave as he used to spray cellulose based paints in his job. Great vid though bud. 👍
Too late lol
yep I know :(
Is this essentially just a pre cat cellulose?
I can tell that it only takes 10 minutes to clean your gun 😢😂