Makes me really glad to be an experienced carpenter and electrician. I just wish someone would come up with a good, affordable kit for the hoardes of people out there buying $99 Ball Pythons, so they wouldn't resort to sticking them in "dollar day" fish tanks.
I'm in the middle of modifying my new 48" ecos, got PVC and made an insert for the top of the screen to attach a 28 watt RHP and light kit. I love these enclosures, and I'm hoping they'll take them a few steps further to accommodate different reptiles. ❤
Truly just happened upon this video after ordering a 4x2x2 for my bull snake. I was worried about it because i got it for $200 on sale but I'm now so excited!
I just got the 36x18x18 and love it. I have only assembled it because there's no hole for the temperature probe. I need to drill a hole or figure out something
Great video. Good recommendation. Love the unbiased video. One gripe, the real time assembly was clearly sped up despite you alluding to real time. Overall I thoroughly enjoyed the video
Watched your video about three weeks ago, on my 2nd Mojave lounge (gray). I made a few changes, I cut out a slit in the back of the background pc (slit on the top when you install because it recesses) so the Arcadia T5Pro and ceiling mounts wires will come out the back without having to make holes in the screen top. Next in used high temp wire ties for the lights( no holes in screen). Sealed the lounge with sealant. These are amazing so far!!
@@sp1d3rm0nk3y85 you will put the top on as it recesses in. Don’t screw it’s in. You will drill three holes right next to each (the back either end ) going down vertically from the top. Next take the top off and make the three holes into one slit with the drill bit and same for the top. So that when you put the top back on it’s turns into one slit For the wires. Then put your wires in before putting the top on.
Oh I'm so glad I saw your video! I just ordered one of the ecoflex majave tanks tonight and wanted to look it up after the fact because I was having some buyers remorse. I cannot wait to get this tank in now! You just eased my mind! Yay! Thank yiu for your review.
Thanks for the video as I purchased one for my carpet! May I ask where you got your shelving? I can't find any of the costway-type shelving that is the right size. The closest I found was 47.7 inches long.
On Chewy's website, one of the answered questions for this enclosure DOES allow you to use an UTH. Although, I would advise against using the "belly heat" method as it isn't natural and they don't need it, and instead use overhead heating.
I have 2 of these for my BPs. They are great and look great. They don't hold humidity well out of the box so i made 2 minor modifications. 1. I siliconed the entire inside edges. 2. Covered the top screen with insulation tape. It's been great ever since... can't beat the price
@Pain-Glory no I don't have lights since I get enough natural lighting in the room. I have heat mats, connected to thermostats, under the substrate. Ground cool side is around 73 and gradually rises to around 90 on warm side. Ambient air temp is around 75. Humidity levels are between 70-85%. So far they are doing great...perfect sheds, excellent eaters, and cruise around all areas of cage.
@unisonicz1 that is true but BP don't need uvb...I know this is a huge debate but to each his own. Mine are healthy, eating, shedding in full, and cruise the cage. No need to over complicate things.
The Ecoflex cages are amazing, stong, light, actual glass doors. I have their 4x2x2, which is great for my baby tegu. Just wish they also came in larger sizes like 6, 7, 8ft long options.
I’m currently building a 6x2x2 Birchwood enclosure. Gonna line the inside with plastic sheeting and seal it all that way moisture doesn’t damage the wood. Got everything I need for about $600 which isn’t too bad compared to online prices with shipping
I’m thinking of getting one of these for my bp but I’m worried that the material might mold or deteriorate due to the higher humidity that bp’s need. Have you had any issues with the material?
Unless you are keeping it wet, I wouldn’t worry. We have deep bed humid hides with sand on one side of them, and no issues. It’s basically poly plastic.
These look great. How do these hold up to high humidity? Will there eventually be warping on sides with continued water/mist, etc? Are walls durable/study enough to mount plants, cork or live backgrounds, etc?
These would handle humidity fine, as it is basically plastic. The only issue is that it is a full open screen top, so you would need to make modification to keep humidity. Also, it is not a water tight cage, so if there was any water that “escaped”, it could easily leak out through the joints.
This definitely doesn’t appear to be a real time assembly. But thanks for the review. I keep coming back to this enclosure when I’m searching but wasn’t sure about the quality. I think I’ll try it out. Thanks!
I have one of the 4' enclosures. The only thing I don't like about them are the fasteners. It would be very easy to strip one of the fasteners as there isn't much of a head to them and it's just very small grooves for the tool to grip. Other than that, I think the cages are great though, especially for the cost.
How did you get yours to retain loose substrate? I’ve had two of these enclosures (the second was a replacement for the first one) but they both have the same problem: they pour out sand and other loose substrate. Was I just unlucky twice? Or have others also faced this issue and if so, what did you do to correct it? I’ve tried aquarium sealant on the edges, corners and cracks when I got this new one and still didn’t help
When we used sand in the past, we would simply use a bead of silicone on the inside seams, or duct tape. This was a quick and cheap way to keep the sand in. We have converted over to 100% gravel for our Uromastyx a few years ago.
@ awesome! I ended up ordering some stick on vinyl flooring that I’m going to line the bottom of her cage in and that should hopefully cover the seals and prevent anything from leaking out
I have the 36”x18”x18” for my bearded dragon and it’s amazing. Great ventilation light weight and durable. Bought mine off chewy and very easy to put together and very easy to clean.
We have another video on our channel where we link them together for an 8ft enclosure. This cage covers a good majority of the typical animals kept in today’s hobby. Anything larger, like tegus or larger snakes, you are better off with building your own.
@@acaciareptiles Thank you, but I’m having a hard time finding affordable PVC board and tempered glass to build. Lowe’s doesn’t sell either one. And The Home Depot wants $1,216USD for one sheet of 6’x3’ tempered glass. Not sure what to do.
I imagine it depends on the substrate you'd be using, I have BPs in mine and the barrier is 4". But the small one that's a 24" has no barrier. Hope that helped.
I just got the 36inch one and love it, untill we put our 1 year old corn snake in it and within 15 mins she got loose. 2 days now she hasbeen missing. Only gap i have seen she could of got out of is something i saw other people mention on the top left corner of the glass there is a gap were a animal inch or smaller in diamater could get out
I love wooden terrariums, they keep the heat in. You can make it as big as you want. With plateaus. I’m building one now. It’s 120 cm wide x122cm deep x120cm high. Making my own rock background. Can’t wait till it’s ready for use. Love the video. Greetings from the Netherlands.
I am sorry if I missed this in the video, but how long have you had one of these enclosures up and running? I am interested in their durability in the long term. Thank you for the video!
Hey James, just over a year now. No issues. We dont move the cages around, just open the door and close them. So not sure we are the best person to ask about durability. We do have large and heavy rocks in them wit no issues.
in your opinion do you think its possible if i combine 2 together by not putting one of the ends on? also what do you use to mount the heat bulbs in yours
Check out our other videos, as we do actually combine these side by side for our breeder set ups. I use the standard Arcadia Mounts, and Amazon has generic versions as I show in the video, but they have not lasted as long as the Arcadia.
Its a screen top, so I just use the clips that come with the fixtures, and use a bolt and wing nut to secure through the screen. You have to cut a hole in the corner to feed the cables through.
Great video. First time soon to be snake owner (kids wanted one). I am glad I ordered this cage yesterday for a baby python. Now I just need to find a table for it. The one they sell to match it are over $300 so I am looking for a cheaper option.
I’ll be putting a new baby ball in the 4x2x2 later this week. Wondering if you’ve had any issue with humidity (60-70% for ball pythons) damaging the enclosure? I keep the ReptiChip moist, and not sure if I need to line the bottom with plastic to keep the moist substrate from contacting the wood/plastic bottom.
@@siinfloridasi No it's been absolutely fine. I sealed all corners and closed off 90% of the vents to help keep in humidity. I also add water and stir up the Reptichip once every couple weeks so I don't always have to add water and it works great
Finally!! I’ve been toggling through cages and wanted to get that light weight zen one because I liked that it could expand but it doesn’t have any side vents and only that mesh top! Getting a Egyptian uro (it’s young).
do you use any of these for snakes? and what do you use to heat them? my snakes would wrap around a light fixture like you have in the one behind you. could i side mount a RHP or use heat cable?
I know this is super late but I use a heat mat and I have a light cage that doesn’t get hot so I don’t need to worry about it. I always used light over the top but wanted to lower it into the enclosure and there are cages for lights that stay cool to avoid an animal hurting themselves.
For boas this doesnt touch a vivarium electronics 48 pvc. Theyre customizable and 315 bucks for a 4x2x15" free shipping. A 4x2x1 ve is 299. Cant beat that but these are nice. I wont argue that and at 342 it's definitely a nice enclosure. A o and my vivarium electronics 48 came to my doorstep in 5 days...i will say the 36" at $172 is a killer deal! Awesome vid and product
Yes I agree, for snakes, those sound like solid alternatives. With the heat, substrate, and scratching that come with lizards, tempered glass is the only way to go. Also ventilation and light/heat options, that acrylic just can’t handle.
Do the Arcadia Reptile Ceramic Lamp Holder & Bracket Pro you use have a UK plug or US plug? And if they are UK plugs how to you adapt them to your system? I can’t seem to find US ones anywhere online.
Appreciate your insights, though the largest is 4' x 2' not close to being large enough for tegus, Cyclura, even smaller monitors.. So do it yourself has to be it..
How have these held up over time? Provided you cover the screen top, have you had success with higher humidity? Debating on buying a few, but my snakes require humidity levels between 60 and 70% and since these panels are not waterproof, I'm a bit apprehensive.
We only have them set up for Uromastyx, so could not speak for higher humidity. They are not water proof, but the material repels water, and does not absorb.
Hi I was wondering how do you heat these enclosures? I have a 24 inch and been debating to get some more for my other ball pythons. Currently just have a heat pad on the one I have. But would like to put a heat tape set up once I get another. This would help me out a lot to figure this out.
I have a question I hope you can answer. I bought a 36" shelf and regular 36" terrariums won't fit because the tanks are actually 36.5" with trim. What are the exact dimensions of yours? I know you got the 48" but it it exactly 48" outside dimension? I appreciate it and sorry for the pita question. I have 2 of these enclosures coming so hope I don't have to pick up more shelving.
These look amazing! I have a Ben habitat -- K originally got it for a small corn snake, who then, unsurprisingly (hindsight is 20/20), escaped right through the front doors. 😂 It works great for a leopard gecko, though, and is a perfect size for keeping her fit and giving her lots of room to climb! Question for you, if you know, but could you easily combine two of these enclosures enclosures to make a longer one? Thanks for this video!
as a large temporary enclosure that can last you a few years if u dont keep big reptiles i got my HUGE 8ftx4ftx4ft grow tent for my lizards growing phase but again this is temporary to save me money, but i know i have to provide the space for my lizard and its cheap and TONS of room upfront for only 160$. Grow tents are awesome temporary alternative until you get the right enclosure.
I am considering and ecoflex as an upgrade for my baby corn snake that is at juvenile stage now. I've been looking at these for quite awhile, but never seen one put together in person. I have a question that I haven't been able to find an answer for. On the screen top...is it removeable with just lifting off, or is it screwed into the structure itself? if it lifts off, how do you secure it so the little houdinis do not escape? And, I've read where you need to seal it as it is not waterproof. What is your take on this? Thanks and thank you so much for this review!
The screen is built in to the cage itself. It is a heavy gauge screen that you can put lighting on the outside or inside, depending on the inhabitants. They take about 15 min to assemble with just the tool that comes with it. It is not waterproof so if you are going to have standing water in you cage, yes you will need to seal.
@sixteezchild I meant to tell you too, heat mats do penetrate these which was another thing I loved. I had a Repti pvc but unless you want to use heat lamps I'd avoid it. I donated mine to a rescue but I liked it. A corn would do great in these and they're super cheap right now. ❤️
It’s fine for one adult ackie. Even tho they aren’t huge , they are super active. Include a 14-18 inch dig box. But of course, bigger is always better. They use all the space you give them
I believe u said u got thwm on amazon. I was wondering wht the name of the enclosure is n how much they cost jw? Need a new cage for my bearded dragon n maybe one for my ball python.
I've had this enclosure for awhile now and I do really like it. The ONE thing I had to do something about was the gap in between the glass doors. It was huge and bugs would get out or even in sometimes. Has this been a problem for anyone else?
They changed the design and they look alot less seamless. Im gonna get one as a quarantine/2nd tank but luckily Im a builder so custom one is easily done
I wonder if these have gotten more popular and thus QC has gotten worse in the few years since you made this video, because the Amazon reviews are full of people whose enclosures came broken. Definitely worth giving it a try. Though I do love my Zen Habitats as well. I imagine people who don't like them have the older models, because the new ones are way better.
I think it’s where they order them from. If you get from a place like Chewy or another reputable place, it should be fine. We have 15 of them in various sizes, and only had one cracked corner and we purchased ours from 3 different vendors. Never could get in to the Zen habitats, felt very flimsy, odd shapes, and the plexi glass is something I can’t work with, especially for the prices they charge. These have real heavy duty tempered glass, billet locks, and heavy gauge wire. Plus they take less than 15 min to put together with one tool that they provide.
Chewy is the place indeed! I saw reviews but I've never had 1 enclosure come broken or damaged! And I've gotten these as well as glass, they at least will pick up if you get one that's damaged too. Much easier to send back than Amazon. Imo.
Appreciate the video. Due to your recommendation I ordered the cage from Amazon, and just put it together. It looks like you're stacking them on a shelving unit. Can you recommend a specific shelving unit that this cage will actually fit? Looks like it's a very tight squeeze on 48" shelves. Thanks!
A colubrid could escape from the side for me, I’m considering for one of my bps, I’ve used dubia enclosures but the side slots worry me about teeny colubrids
I know this video is a year old, but I just want to say that those mini acrylic enclosures are NOT good for anything requiring high humidity. The humidity will cause the acrylic to warp, ruining any sliding doors and leaving gaps for critters to escape through. They're fantastic for arid species, though, especially invertebrates. I use them for dwarf tarantulas and jumping spiders.
Thank you I’ve been stressing out about the perfect tank to get. It’s so much conflicting information For a Bearded Dragon what lights are recommended to keep the perfect temperature? Do you have a video on how to install the lights in this tank ? Thank you again
It all comes down to the environmental temperature the cage is in. Unfortunately you have to play around with various watts and set ups, to get the temps you are looking for. Also, will depend on the basking set up you have and how easy an animal can get near the light.
Melamine and wood ain't all that bad. I mean, if you aren't using a circuit interrupter , open wiring etc with a large collection; sure. It can be dangerous. But a single melamine enclosure with a ceramic heat emitter in an installed porcelain lamp fixture with a circuit interrupter should be pretty damn safe.
I just got one of these 4x2x2 off Chewy for $196! Thanks for posting this!
Update?
How is it?
Seen this video. Straight canceled my reptizoo on Amazon and ordered the same size eco flex for $130. Saved me over $120 my guy. Thank you.
Much better choice!!!
Makes me really glad to be an experienced carpenter and electrician. I just wish someone would come up with a good, affordable kit for the hoardes of people out there buying $99 Ball Pythons, so they wouldn't resort to sticking them in "dollar day" fish tanks.
I'm in the middle of modifying my new 48" ecos, got PVC and made an insert for the top of the screen to attach a 28 watt RHP and light kit. I love these enclosures, and I'm hoping they'll take them a few steps further to accommodate different reptiles. ❤
Truly just happened upon this video after ordering a 4x2x2 for my bull snake. I was worried about it because i got it for $200 on sale but I'm now so excited!
I just got the 36x18x18 and love it. I have only assembled it because there's no hole for the temperature probe. I need to drill a hole or figure out something
Yes, if you have a cordless have at it. All my probes went in that way.
Great video. Good recommendation. Love the unbiased video.
One gripe, the real time assembly was clearly sped up despite you alluding to real time. Overall I thoroughly enjoyed the video
Thank you so much. Ordered one for my baby ackie monitor. Got the 4x2x2! Gonna include a dig box in there for it. Thanks !!!
And will do the same thing you did for lights
Watched your video about three weeks ago, on my 2nd Mojave lounge (gray). I made a few changes, I cut out a slit in the back of the background pc (slit on the top when you install because it recesses) so the Arcadia T5Pro and ceiling mounts wires will come out the back without having to make holes in the screen top. Next in used high temp wire ties for the lights( no holes in screen). Sealed the lounge with sealant. These are amazing so far!!
What did you use to cut the holes in the back? I really want to do it but I wasn’t sure what tool to use.
@@sp1d3rm0nk3y85 you will put the top on as it recesses in. Don’t screw it’s in. You will drill three holes right next to each (the back either end ) going down vertically from the top. Next take the top off and make the three holes into one slit with the drill bit and same for the top. So that when you put the top back on it’s turns into one slit For the wires. Then put your wires in before putting the top on.
@@urbanalbino619 awesome! Thank you!
@@urbanalbino619I would love to see a pic of how you did that! I think I can picture it, but would love to be sure before I start altering mine.
@@siinfloridasi not sure how to post a picture on YT?!?
I'm super happy with mine. There wasn't many reviews out there when I bought it, but I agree, highly recommended.
Oh I'm so glad I saw your video! I just ordered one of the ecoflex majave tanks tonight and wanted to look it up after the fact because I was having some buyers remorse. I cannot wait to get this tank in now! You just eased my mind! Yay! Thank yiu for your review.
Hope you enjoy it!
Do you have a link I can't find it
Do you like it?
Thanks for the video as I purchased one for my carpet! May I ask where you got your shelving? I can't find any of the costway-type shelving that is the right size. The closest I found was 47.7 inches long.
How do you like it?
Are there good ?
Love to get one for my ball python but do these accept and under tank heating mat by any chance?
On Chewy's website, one of the answered questions for this enclosure DOES allow you to use an UTH. Although, I would advise against using the "belly heat" method as it isn't natural and they don't need it, and instead use overhead heating.
I have 2 of these for my BPs. They are great and look great. They don't hold humidity well out of the box so i made 2 minor modifications. 1. I siliconed the entire inside edges. 2. Covered the top screen with insulation tape. It's been great ever since... can't beat the price
Do you have dome lights and uvb? If so did you mount them inside or kept them on top of the mesh?
@Pain-Glory no I don't have lights since I get enough natural lighting in the room. I have heat mats, connected to thermostats, under the substrate. Ground cool side is around 73 and gradually rises to around 90 on warm side. Ambient air temp is around 75. Humidity levels are between 70-85%. So far they are doing great...perfect sheds, excellent eaters, and cruise around all areas of cage.
@7Des7 uvb does not pass through normal house windows. So it will really not pass through the additional glass of the enclosure.
@unisonicz1 that is true but BP don't need uvb...I know this is a huge debate but to each his own. Mine are healthy, eating, shedding in full, and cruise the cage. No need to over complicate things.
@7Des7 correct, UVB can't hurt, can only help so may as well not overcomplicat it.
The Ecoflex cages are amazing, stong, light, actual glass doors. I have their 4x2x2, which is great for my baby tegu. Just wish they also came in larger sizes like 6, 7, 8ft long options.
They have a 5ft
I’m currently building a 6x2x2 Birchwood enclosure. Gonna line the inside with plastic sheeting and seal it all that way moisture doesn’t damage the wood. Got everything I need for about $600 which isn’t too bad compared to online prices with shipping
I’m thinking of getting one of these for my bp but I’m worried that the material might mold or deteriorate due to the higher humidity that bp’s need. Have you had any issues with the material?
Unless you are keeping it wet, I wouldn’t worry. We have deep bed humid hides with sand on one side of them, and no issues. It’s basically poly plastic.
I sealed mine, and they haven't molded but you will need to use the silicone.
These look great. How do these hold up to high humidity? Will there eventually be warping on sides with continued water/mist, etc? Are walls durable/study enough to mount plants, cork or live backgrounds, etc?
These would handle humidity fine, as it is basically plastic. The only issue is that it is a full open screen top, so you would need to make modification to keep humidity. Also, it is not a water tight cage, so if there was any water that “escaped”, it could easily leak out through the joints.
This definitely doesn’t appear to be a real time assembly. But thanks for the review. I keep coming back to this enclosure when I’m searching but wasn’t sure about the quality. I think I’ll try it out. Thanks!
these are great yes!
Are they good for corn snakes
What hardware do you use to mount the lights inside I jut bought 2 of these for my beardies.
I have one of the 4' enclosures. The only thing I don't like about them are the fasteners. It would be very easy to strip one of the fasteners as there isn't much of a head to them and it's just very small grooves for the tool to grip. Other than that, I think the cages are great though, especially for the cost.
How did you get yours to retain loose substrate? I’ve had two of these enclosures (the second was a replacement for the first one) but they both have the same problem: they pour out sand and other loose substrate. Was I just unlucky twice? Or have others also faced this issue and if so, what did you do to correct it? I’ve tried aquarium sealant on the edges, corners and cracks when I got this new one and still didn’t help
When we used sand in the past, we would simply use a bead of silicone on the inside seams, or duct tape. This was a quick and cheap way to keep the sand in. We have converted over to 100% gravel for our Uromastyx a few years ago.
@ awesome! I ended up ordering some stick on vinyl flooring that I’m going to line the bottom of her cage in and that should hopefully cover the seals and prevent anything from leaking out
I have the 36”x18”x18” for my bearded dragon and it’s amazing. Great ventilation light weight and durable. Bought mine off chewy and very easy to put together and very easy to clean.
Is that what he has behind him
Same thing with my corn snake
@@chrisloshbaugh6989yes
Would you reccomended these for bioactive enclosures? I just bought one for my rainbow boa.
I would not, as they are not water proof, and springtails and other bio critters would get out.
Hey also from upstate. Great video I just ordered one of these for my ball python!
Looking to order some of these soon! what did you use to mount the light fixtures?
I’ve seen people use nuts and bolts through the screen to attach the lights inside.
Great video but what about for a longer tank? Like 6ft? What’s your recommendation?
We have another video on our channel where we link them together for an 8ft enclosure. This cage covers a good majority of the typical animals kept in today’s hobby. Anything larger, like tegus or larger snakes, you are better off with building your own.
@@acaciareptiles Thank you, but I’m having a hard time finding affordable PVC board and tempered glass to build. Lowe’s doesn’t sell either one. And The Home Depot wants $1,216USD for one sheet of 6’x3’ tempered glass. Not sure what to do.
Have they changed these, the one in your video has a small lip, but on the website they all look to have a very huge lip in the front?
Honestly, not sure, I haven’t purchased another one in awhile
I imagine it depends on the substrate you'd be using, I have BPs in mine and the barrier is 4". But the small one that's a 24" has no barrier. Hope that helped.
I just got the 36inch one and love it, untill we put our 1 year old corn snake in it and within 15 mins she got loose. 2 days now she hasbeen missing. Only gap i have seen she could of got out of is something i saw other people mention on the top left corner of the glass there is a gap were a animal inch or smaller in diamater could get out
I love wooden terrariums, they keep the heat in. You can make it as big as you want. With plateaus.
I’m building one now. It’s 120 cm wide x122cm deep x120cm high. Making my own rock background. Can’t wait till it’s ready for use.
Love the video. Greetings from the Netherlands.
Really cool!! I did my own a while ago and it came out great! It's in my yt channel too, only that it's in Spanish xS
Can you tell me what type/brand of brackets you use to mount the heat lamps and the Florissant light. Thx.
The incandescent light brackets can be purchased on www.lightyourreptile.com The Flo recent is just held on with the clamps they came with.
I am sorry if I missed this in the video, but how long have you had one of these enclosures up and running? I am interested in their durability in the long term. Thank you for the video!
Hey James, just over a year now. No issues. We dont move the cages around, just open the door and close them. So not sure we are the best person to ask about durability. We do have large and heavy rocks in them wit no issues.
in your opinion do you think its possible if i combine 2 together by not putting one of the ends on? also what do you use to mount the heat bulbs in yours
Check out our other videos, as we do actually combine these side by side for our breeder set ups. I use the standard Arcadia Mounts, and Amazon has generic versions as I show in the video, but they have not lasted as long as the Arcadia.
How did you attach the hanging lights to the screen ?
I used small nuts and bolts
Would you recommend this for a ball python? Are you able to keep humidity levels a little higher in it?
Humidity could be tough, as it has a screen top and cross ventilation. You could cover the top.
You can cover screen tops with hvac tape or hvac wrap to help keep in heat and humidity. Just leave an opening for your lamps.
Can this cage take moisture. I have Melanistic lacertas and I use the coco chips etc. And I spray or dampen one side daily like a mist
Seal the inside edges with silicone.. works great
I noticed that they change the design that the front lip is way taller, so the viewing is not as good
To keep deeper substrate in
Do they make a 4x2x4? Or just one that is more dedicated to height?
How did you put your uvb on the inside?
Its a screen top, so I just use the clips that come with the fixtures, and use a bolt and wing nut to secure through the screen. You have to cut a hole in the corner to feed the cables through.
what kind of shelving are you using ?
Great video. First time soon to be snake owner (kids wanted one). I am glad I ordered this cage yesterday for a baby python. Now I just need to find a table for it. The one they sell to match it are over $300 so I am looking for a cheaper option.
I’ll be putting a new baby ball in the 4x2x2 later this week. Wondering if you’ve had any issue with humidity (60-70% for ball pythons) damaging the enclosure? I keep the ReptiChip moist, and not sure if I need to line the bottom with plastic to keep the moist substrate from contacting the wood/plastic bottom.
@@siinfloridasi No it's been absolutely fine. I sealed all corners and closed off 90% of the vents to help keep in humidity. I also add water and stir up the Reptichip once every couple weeks so I don't always have to add water and it works great
What about the thrive eco flex 51 gallon
Finally!! I’ve been toggling through cages and wanted to get that light weight zen one because I liked that it could expand but it doesn’t have any side vents and only that mesh top! Getting a Egyptian uro (it’s young).
Yes, we tried ZEN, and they were too fragile, had plexi glass fronts, and sizes were odd. These have been great, and can expand
can expand like i could put the two in the video togehter somehow?>
@@acaciareptiles
were did you get the things you stack them on i cant find them anywere
do you use any of these for snakes? and what do you use to heat them? my snakes would wrap around a light fixture like you have in the one behind you. could i side mount a RHP or use heat cable?
I know this is super late but I use a heat mat and I have a light cage that doesn’t get hot so I don’t need to worry about it. I always used light over the top but wanted to lower it into the enclosure and there are cages for lights that stay cool to avoid an animal hurting themselves.
For boas this doesnt touch a vivarium electronics 48 pvc. Theyre customizable and 315 bucks for a 4x2x15" free shipping. A 4x2x1 ve is 299. Cant beat that but these are nice. I wont argue that and at 342 it's definitely a nice enclosure. A o and my vivarium electronics 48 came to my doorstep in 5 days...i will say the 36" at $172 is a killer deal! Awesome vid and product
Yes I agree, for snakes, those sound like solid alternatives. With the heat, substrate, and scratching that come with lizards, tempered glass is the only way to go. Also ventilation and light/heat options, that acrylic just can’t handle.
i have one i am confused about the little knob that slides in to the sticky thing on the rhe door. does it have no function
Do the Arcadia Reptile Ceramic Lamp Holder & Bracket Pro you use have a UK plug or US plug? And if they are UK plugs how to you adapt them to your system? I can’t seem to find US ones anywhere online.
www.lightyourreptiles.com/miscellaneous-accessories/
I must’ve missed it, but I don’t know the name of the enclosure what was it? I am new to reptiles and I’m trying to give them the best home.
New Age Pet ECOFLEX Reptile Lounge
Appreciate your insights, though the largest is 4' x 2' not close to being large enough for tegus, Cyclura, even smaller monitors.. So do it yourself has to be it..
They have 5ft
Great video! I’m going to have to try these out. Look like a great option for my herps. What brand rack are you using that fits a 4x2x2? TIA
They are a VERY tight squeeze, and need some “convincing”, but the racks at Home Depot with metal grate shelves work best.
Could you include a link to the racks you’re using?
Do you think there’s a simple way to connect 2 four foot cages?
Hey sir what shelving units are those ??
Husky rack system from Home Depot
How have these held up over time? Provided you cover the screen top, have you had success with higher humidity? Debating on buying a few, but my snakes require humidity levels between 60 and 70% and since these panels are not waterproof, I'm a bit apprehensive.
We only have them set up for Uromastyx, so could not speak for higher humidity. They are not water proof, but the material repels water, and does not absorb.
Where do you insert your thermostat probe? It doesn't look like an entrance is on these enclosures to run the wire through?
Drill a small hole just big enough for probe to fit through
We just run it through the side of the track for the glass, it sits below the glass in a very small gap.
Hello I was wondering if there is a way to stack these tanks
Does the lock go all the way thru both panes of glass, and do you think baby garters would squeeze out
Its an adhesive lock, and no, it is very close together and heavy glass, so no squeezing and pushing through, like plexi.
How would you recommend threading wires into the enclosure? Thermostat probe, thermometer, etc.
I personally hang all of the lighting inside. I cut a small square to feed the plugs out on the corner, and its worked great.
Hi I was wondering how do you heat these enclosures? I have a 24 inch and been debating to get some more for my other ball pythons. Currently just have a heat pad on the one I have. But would like to put a heat tape set up once I get another. This would help me out a lot to figure this out.
I use light fixtures mounted internally, but I only keep lizards in these, so I know it would be different for snakes.
Also will the crickets escape from the side vents???
I have a question I hope you can answer. I bought a 36" shelf and regular 36" terrariums won't fit because the tanks are actually 36.5" with trim. What are the exact dimensions of yours? I know you got the 48" but it it exactly 48" outside dimension? I appreciate it and sorry for the pita question. I have 2 of these enclosures coming so hope I don't have to pick up more shelving.
Unfortunately they are slightly over 48 inches, so we have to do some “creative” fitting in them.
@@acaciareptiles ahh man, I was afraid of that. Thanks for the reply, I appreciate it.
www.homedepot.com/p/Husky-5-Tier-Heavy-Duty-Boltless-Steel-Garage-Storage-Shelving-Unit-in-Black-48-in-W-x-78-in-H-x-24-in-D-N2R482478W5B/319132811
These look amazing! I have a Ben habitat -- K originally got it for a small corn snake, who then, unsurprisingly (hindsight is 20/20), escaped right through the front doors. 😂 It works great for a leopard gecko, though, and is a perfect size for keeping her fit and giving her lots of room to climb!
Question for you, if you know, but could you easily combine two of these enclosures enclosures to make a longer one?
Thanks for this video!
I actually just did that last week. I will be posting another video on how this week!
Awesome!!!
Whats the best one for a corn snake to not get out? Im getting my first one soon. never had to worry about this with my boa
Do you know if it's possible to buy just the replacement lock set for these?
Not that I recall. We have used regular glass slide locks on them also.
Nice! I have seen these but I held back after reading a bad review.
We love them, and no issues here!
as a large temporary enclosure that can last you a few years if u dont keep big reptiles i got my HUGE 8ftx4ftx4ft grow tent for my lizards growing phase but again this is temporary to save me money, but i know i have to provide the space for my lizard and its cheap and TONS of room upfront for only 160$. Grow tents are awesome temporary alternative until you get the right enclosure.
Need to know where to get the basking lights you have mounted inside
www.lightyourreptiles.com/miscellaneous-accessories/
This site has the fixtures, light bulbs, and heat projectors.
Is there a link to the lights and mount?
What website do I get these from?
You can search anywhere, but it appears that Chewy has them consistently in stock
Help!!! I can’t find the rack .can you possibly post a link.?
www.homedepot.com/p/Husky-5-Tier-Heavy-Duty-Boltless-Steel-Garage-Storage-Shelving-Unit-in-Black-48-in-W-x-78-in-H-x-24-in-D-N2R482478W5B/319132811
How did you mount your lighting ??
I mounted all fixtures with small bolt/nut sets, or whatever hardware came with the lights themselves. I mounted internally.
I am considering and ecoflex as an upgrade for my baby corn snake that is at juvenile stage now. I've been looking at these for quite awhile, but never seen one put together in person. I have a question that I haven't been able to find an answer for. On the screen top...is it removeable with just lifting off, or is it screwed into the structure itself? if it lifts off, how do you secure it so the little houdinis do not escape? And, I've read where you need to seal it as it is not waterproof. What is your take on this? Thanks and thank you so much for this review!
The screen is built in to the cage itself. It is a heavy gauge screen that you can put lighting on the outside or inside, depending on the inhabitants. They take about 15 min to assemble with just the tool that comes with it. It is not waterproof so if you are going to have standing water in you cage, yes you will need to seal.
@@acaciareptiles thank you so much!
@@sixteezchildI'm so not mechanical lol but I can pop one together myself in about 15-20 min. ❤
@@Kellz58 awesome!!! I have not ruled it out for my baby next year! The ecos are good looking!
@sixteezchild I meant to tell you too, heat mats do penetrate these which was another thing I loved. I had a Repti pvc but unless you want to use heat lamps I'd avoid it. I donated mine to a rescue but I liked it. A corn would do great in these and they're super cheap right now. ❤️
Would this be suitable more an ackie monitor???
It’s fine for one adult ackie. Even tho they aren’t huge , they are super active. Include a 14-18 inch dig box.
But of course, bigger is always better. They use all the space you give them
Is this good for tortoise ?
Smaller species, such as pancake, Russian, and Egyptian would work well in these.
Could this be used with a heat mat?
I believe so, as long as hooked to a thermostat, there shouldn’t be any issues.
Hey man where you get that shelf rack for the enclosure
Home Depot Husky Heavy Duty. They dont fit in perfectly, and it will take 2-3 people to help you “convince them” to fit LOL
@@acaciareptiles thank you 😊 😂
can perch holders be screwed into the sides
Yes
I believe u said u got thwm on amazon. I was wondering wht the name of the enclosure is n how much they cost jw? Need a new cage for my bearded dragon n maybe one for my ball python.
Great Video!
What shelf do you use
I've had this enclosure for awhile now and I do really like it. The ONE thing I had to do something about was the gap in between the glass doors. It was huge and bugs would get out or even in sometimes. Has this been a problem for anyone else?
They changed the design and they look alot less seamless. Im gonna get one as a quarantine/2nd tank but luckily Im a builder so custom one is easily done
Can you add a solid top? I live in massachusetts and need to keep the heat in
I am sure you can build something. We are located in Upstate NY, so we have to battle the -30F temps, I get it!
I wonder if these have gotten more popular and thus QC has gotten worse in the few years since you made this video, because the Amazon reviews are full of people whose enclosures came broken. Definitely worth giving it a try. Though I do love my Zen Habitats as well. I imagine people who don't like them have the older models, because the new ones are way better.
I think it’s where they order them from. If you get from a place like Chewy or another reputable place, it should be fine. We have 15 of them in various sizes, and only had one cracked corner and we purchased ours from 3 different vendors. Never could get in to the Zen habitats, felt very flimsy, odd shapes, and the plexi glass is something I can’t work with, especially for the prices they charge. These have real heavy duty tempered glass, billet locks, and heavy gauge wire. Plus they take less than 15 min to put together with one tool that they provide.
@@acaciareptiles Great to know, thanks! I'm definitely going to give this one a try.
@@corvins_cash I just got the 36 inch and had no issues with quality
Chewy is the place indeed! I saw reviews but I've never had 1 enclosure come broken or damaged! And I've gotten these as well as glass, they at least will pick up if you get one that's damaged too. Much easier to send back than Amazon. Imo.
Would you post a link to the led light you have please?
And the arcadia light fixtures
www.amazon.com/SZHLUX-Daylight-Linkable-Integrated-Workshop/dp/B08QTYDM31/ref=sr_1_9?keywords=2ft+led+shop+lights&qid=1676321132&sr=8-9
Appreciate the video. Due to your recommendation I ordered the cage from Amazon, and just put it together.
It looks like you're stacking them on a shelving unit. Can you recommend a specific shelving unit that this cage will actually fit? Looks like it's a very tight squeeze on 48" shelves. Thanks!
We use the one from Home Depot, that goes for around $175. They are a SUPER tight squeeze, and you have to get quite forceful to get them in.
What are those sliding door locks called and can you buy them anywhere?
Sorry Ross, they come with the cage, so I couldn’t tell you.
@@acaciareptiles no problem thanks anyway
Is there a way to access the cage from the top down without completely taking it apart?
No, just the sliding glass front doors
A colubrid could escape from the side for me, I’m considering for one of my bps, I’ve used dubia enclosures but the side slots worry me about teeny colubrids
yes should say its not safe for coubrid
Have you used this cage for Bioactive setup?
No, sorry we have not.
Is there a different way to stack them without a rack… want to buy the grey ones and stack them
Unfortunately no
I know this video is a year old, but I just want to say that those mini acrylic enclosures are NOT good for anything requiring high humidity. The humidity will cause the acrylic to warp, ruining any sliding doors and leaving gaps for critters to escape through. They're fantastic for arid species, though, especially invertebrates. I use them for dwarf tarantulas and jumping spiders.
Heat causes that, not humidity lol
@@unisonicz1 I've never used them with any kind of supplemental heat. I've only had those problems with very high humidity enclosures.
@prairiepanda that is fine. As someone who works daily with acrylic, I can say humidity does nothing to it lol
Are they okay for woma pythons and dwarf boas?
I have two Womas in them, so yes
Will this enclosure work well for a Ball Python?
Yes, you will just have to monitor the humidity, as it has an open screen top.
I have a question how do you stack them
They are unable to be stacked, as they have screen tops. We use 4ft metal racks to stack.
Thank you
I’ve been stressing out about the perfect tank to get. It’s so much conflicting information
For a Bearded Dragon what lights are recommended to keep the perfect temperature?
Do you have a video on how to install the lights in this tank ?
Thank you again
probably a halogen flood lamp, one from arcadia would be the best
It all comes down to the environmental temperature the cage is in. Unfortunately you have to play around with various watts and set ups, to get the temps you are looking for. Also, will depend on the basking set up you have and how easy an animal can get near the light.
Melamine and wood ain't all that bad.
I mean, if you aren't using a circuit interrupter , open wiring etc with a large collection; sure. It can be dangerous.
But a single melamine enclosure with a ceramic heat emitter in an installed porcelain lamp fixture with a circuit interrupter should be pretty damn safe.
True, but weighs 100lbs
It’s not very quick to put together it took me about an hour to do. But I still have it and works fine.
Where does the air flow threw ?
I mean where is the ventilation
The top is screen, and there are slots on the side for cross ventilation.