Це відео не доступне.
Перепрошуємо.
How To - Initial and System Setup on Pioneer In-Dash Receivers 2018
Вставка
- Опубліковано 26 лип 2024
- In this video you'll learn about the Initial and System Setup on the Pioneer DEH-S4000BT in-dash receiver.
MVH-S300BT
MVH-S400BT
FH-S500BT
DEH-S4000BT
DEH-S4010BT
For more videos about the Pioneer DEH-S4000BT check out this You Tube Playlist: • DEH-S4000BT
You can find more information about the Pioneer in-dash Receivers here: www.pioneerelectronics.com
Follow Pioneer on facebook / pioneernorthamerica
Join the conversation with Pioneer on Twitter / pioneerusa
Follow Pioneer on Instagram / pioneercaraudio
Hello my friend thank you for sharing my pioneer DEH-p590ib I press it to turn it on and nothing happens and then eventually the screen will light on and say (no compressor) any ideas what could be happening? I found the 40 A fuse to be slightly burnt separated I try to jump it with same results I just ordered new fuses do you think that was it?
The Pioneer DEH-P590IB was manufactured back in 2005/2006. I'm not aware of an error message reading "no compressor". If the product powers up, I don't think a fuse is the problem. It's possible the product may need to be serviced. I recommend to contact Pioneer Customer Service in your area for help finding an Authorized Service Center. You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
thanx alot for this video
You can find more How To videos about Pioneer DEH-S400BT in this Pioneer playlist: ua-cam.com/video/hiDOCp75UAI/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
I installed a DEH - S6000BS and connected my Ipod Nano 7th gen that I used to always connect to my older Pioneer head unit (DEH - X3700UI)
It plays the music that I have in the Ipod, but I just can't seem to find a way to navigate through the music folders in the Ipod.
On the older model I would just press the magnifying glass button on the head unit and it would take me to my lybrary where I could manually pick a playlist, song, etc.
When I press the magnifying glass button on the S6000BS it just displays a text on the screen that reads "start arc app"
I don't want to use the arc app. How can I disable it?
Thanks for your help.
The Pioneer DEH-S6000BS is designed to be used with iPhone. Not iPod. As you have found, an iPod Nano Gen 7 (from 2012) will play music, but that's about it. I'm not aware of a way to make it work with an iPod. I recommend a couple of options. 1. Transfer your music to a USB Flash Drive. You can search and play your music from the USB source as seen here: ua-cam.com/video/kKN9BkchGVY/v-deo.html or Option 2. Transfer your music to an iPhone and use the Bluetooth Audio Source to search for, and playback your music. or Option 3. Try the ARC app for Android or iPhone. It works very well either through USB or Bluetooth. You can find more about the Pioneer ARC app here: ua-cam.com/video/icdWHqbS-7o/v-deo.html Please be sure to have the latest firmware installed on your DEH-S6000BS. You can find it here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-S6000BS#downloads You can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
Thanks i learned alot in this video of it and wanted to know how can i make it connect automatically (Bluetooth) to my phone
What is the model number of your Pioneer in-dash receiver? What type of phone? Please be sure your phone is not connected to another Bluetooth devices such as a headset or a portable speaker. This can block the receiver from connecting to the phone. Additionally, please be sure the in-dash receiver is not connected to another phone, this can block a 2nd phone from connecting. Here is a video from Pioneer demonstrating how to pair an iPhone to the receiver: ua-cam.com/video/Fm2U1Ck1qlU/v-deo.html and an Android based phone here: ua-cam.com/video/8t8hiqq2kCI/v-deo.html You can learn more about the Bluetooth Settings Menu on your Pioneer receiver in this video: ua-cam.com/video/_q2aLp_VAeo/v-deo.html
I can't read the settings during the daytime. I can only get one am channel. Only one speaker gives sound. The clock doesn't reset. Other than that, this is the best car radio I've ever had.
If the clock goes back to 12:00 every time you start your car, that means you have the in-dash receiver installed incorrectly. You can learn more about the Pioneer Wire Harness system in this video: ua-cam.com/video/kR2MO2kwFug/v-deo.html Focus on the Yellow Wire for constant power to keep the clock and the Red Wire for ignition. Don't wire Red and Yellow together. If only one speaker is playing that means you have the in-dash receiver installed incorrectly. Again, please watch this video about the Pioneer Wire Harness system. The speaker outputs are clearly shown: ua-cam.com/video/kR2MO2kwFug/v-deo.html Also be sure the Balance And Fade controls are set to Zero. You can see that in this video: ua-cam.com/video/hiDOCp75UAI/v-deo.html Do you have your vehicle's antenna properly connected to the in-dash receiver? If you only get one AM channel it sounds like you have the Local/Seek setting on too high a level. Please set the Local Setting to OFF. You can see it in this Tuner Operation Video: ua-cam.com/video/b7Baainh0X4/v-deo.html and if you can't read the settings in the daytime, please be sure to have the Dimmer switched off during the day. You can see the Dimmer operation video here: ua-cam.com/video/pMKUPcGE26c/v-deo.html You can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
Hey is this the same contorls for the DEH-S4050BT as well as the other 2018 videos?
This will be very similar. You can more videos for DEH-S4010BT in this You Tube Playlist: ua-cam.com/video/tMLFL8K3gMM/v-deo.html
Hi i have DEH-S3000BT pioneer car stereo i install it to my bmw everything is done but when i use to call to myphone it was paired but no tone come out from the speaker does any one help me for this???
Phone calls can be heard on the FRONT SPEAKER OUTPUTS and FRONT RCA OUTPUTS only.
Bluetooth Audio can be heard on both Front and Rear Speaker outputs.
To check your set up, fade the system all the way to the front. Can you hear a call? Can you hear music? For help with the fader, check out this video: ua-cam.com/video/hiDOCp75UAI/v-deo.html
Need help with Speaker wiring? Check out this video: ua-cam.com/video/kR2MO2kwFug/v-deo.html
When I get a phone call, it comes thru my speakers but not they can't hear me. Can I use my phone mic? Or is there a mic built in that goes thru the deck? Doesn't seem to like phone calls. I have a Pioneer deh-54120bt.
The Pioneer DEH-S4120BT includes an external microphone that is used for phone calls and other voice commands. You can see the microphone in this unboxing video: ua-cam.com/video/RHIJrVI37ac/v-deo.html The microphone plugs into the back of the in-dash receiver, and is usually installed on the vehicle's headliner near the rear view mirror. ua-cam.com/video/RHIJrVI37ac/v-deo.html This installation location is so the mic can "hear" the driver talking in a reasonable voice volume. Without the included microphone, Bluetooth phone calls won't work very well. Please be sure to install the latest firmware for your Pioneer DEH-S4120BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-S4120BT#downloads You can find more How To videos with very similar operation to the Pioneer DEH-S4120BT here: ua-cam.com/video/hiDOCp75UAI/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
Hey! Thanks for the videos! I have a mvh-s300bt and I often use the mute button but when I connect a wired remote on the back, the mute button on the remote works as "ATT" which I dont like because I like to mute ocasionally while driving to check for any car noises. Is there any setting to change the ATT setting while using remote? To make myself clear, the mute button works fine, its just on the remote side. Many thanks in advance
Please clarity a few points for me. When you do not have the steering wheel remote control adapter connected to the in-dash receiver, the Mute Button on the wireless remote control works properly for your application and, the word "MUTE" flashes on the screen. When you have the steering wheel control adapter plugged in, the steering wheel controls work properly, and the wireless remote control Mute button changes the receiver's operation from "Mute" to "ATT" or attenuate. If that's the case I think what's happening is the Steering Wheel Remote control adapter is overriding the Mute operation for ATT. What is the make and model of your Steering Wheel remote control adapter? Can the steering wheel remote control adapter be programmed with different functions? Many types can be programmed different ways. Take a look at the manual that came with the steering wheel remote control adapter to determine if you can map buttons differently and change ATT to MUTE. Please be sure to install the latest firmware update for your steering wheel remote control adapter. Please be sure to install the latest firmware for your Pioneer MVH-S300BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/MVH-S300BT#downloads
EXELLENT REVIEW ........ Just tried setting mine up after install, i hAVE no BT, no PHONE & no AUXILLARY ....... is there ANY way to set it so Those options dont show up when I hit SOURCE?: i only use Radio usb & cd hjate having to sxcroll thru phone BT,,Aux just to get to what I want to hear which is either Radio or usb or CD anyway to avoid phone,BT or aux from showing up on my screen?:
Please watch the full video above again. It explains in great detail how to switch off Bluetooth and how to switch off auxiliary. You can find more videos about Pioneer DEH-S4000BT here: ua-cam.com/video/tMLFL8K3gMM/v-deo.html
I have a DEH S4100BT installed a year ago. My only issue is that I have to pair my phone to my receiver every time I start my car. My clock settings and saved radio stations are good, they are not affected. Is it possible that having multiple bluetooth devices on my phone causes this to happen?
This isn't normal operation for the Pioneer DEH-S4100BT. Please be sure your phone is not connected to another device like a headset or portable speaker. This can block the in-dash receiver from connecting. The receiver can have multiple phones connected at the same time. Please be sure no other phones are automatically connecting to the receiver and becoming the active device. I recommend to try a few things to correct the issue. First, please be sure to install the latest firmware on your Pioneer DEH-S4100BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-S4100BT#downloads Next press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer DEH-S4100BT behind the detachable face, near the center of the receiver. You can see it here: ua-cam.com/video/o6iawP279R4/v-deo.html Next delete all phones from the in-dash receiver's Bluetooth memory. You can see it here: ua-cam.com/video/_q2aLp_VAeo/v-deo.html Next, delete the in-dash receiver from the Phone's Bluetooth Memory, and restart the phone. Next begin the phone pairing process from the beginning. You can see it here: ua-cam.com/video/w3OlAZzLLX0/v-deo.html You can find more videos with similar operation to Pioneer DEH-S4100BT here: ua-cam.com/video/42EL_JGXcJs/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
i am installing a 4010bt, with a microphone wire that clicks into the back of the deck, inside the dash, where is the wire for the microphone supposed to go to come out into the inside of the vehicle? gawd only knows why it isnt mentioned anywhere in the manual??? tia
I recommend to install the microphone on the vehicle headliner near the rearview mirror or near the drivers sun visor. You can find more videos about Pioneer DEH-S4010BT here: ua-cam.com/video/icdWHqbS-7o/v-deo.html
i just bought mvh-s100ub. my car's speakers are amplified by an amplifier so i have to use the rca cables for them. the problem is that all it does is bass and no voice at all.
If your amplifier has a Low Pass Filter or Low Pass crossover, switch the crossover off. On the Pioneer in dash receiver Initial Set Up Menu, make sure the Speaker Mode is set to "Rear/Rear" for full range output, and not just subwoofer output. You can see it in this video: ua-cam.com/video/YNniqyTm-TE/v-deo.html You can find more videos about Pioneer DEH-S1000UB in this playlist: ua-cam.com/video/pr2QT-p9EOU/v-deo.html
When my stereo is of and I click the volume button in the menu don't come up it just don't do nothing. iv done it before but it's not working now help!!
I recommend to remove the face and put it back on. Go to the system menu and do a System Restore. You can see more videos about Pioneer DEH-S4000BT here: ua-cam.com/video/HdqU2rftA2E/v-deo.html
Does a pioneer remote work with any pioneer deck??
Mostly yes. A genuine Pioneer wireless remote control should work for nearly any modern Pioneer in-dash receiver that has a remote eye to "see" the signal from the remote control. Nearly all modern Pioneer receivers have this. You did not mention what model number of Pioneer receiver you have. If you have an old receiver from many years ago all bets are off. Pioneer wireless remote controls are infrared transmitters and are not "linked" to any one individual receiver. If you have a remote control that's not working, I recommend to replace the battery. If you need a remote control I recommend the Pioneer CD-R510. You can see it here: www.pioneerelectronics.com/PUSA/Car/Accessories/Remote-Controls/CD-R510 You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Hi. I just installed deh s4000bt on my vehicle. the problem is that I cannot access initial settings. I switch power off using src button but when I press vokume button, nothing haappens. What is wrong?
It sounds like there is no power to the in dash receiver. The vehicle needs to be switched ON and the in dash receiver switched off. Be sure you have the Yellow Wire and Red Wire installed correctly. You can see more about wiring in this video: ua-cam.com/video/kR2MO2kwFug/v-deo.html
+Deckerd Otto Hello. Thank you for your answer. There is power to the radio. I use it every day. Everything is connected. It is very strange to me. The other problem I have is that today I installed new set of two way speakers. I connected them using output on the back and all I have is silence now. It is all very strange to me.
How do you turn off the deh-s4010bt this system is on a bbq island not a vehichle
Press and hold the SRC button on the in-dash receiver to turn off the source. If the lights remain on after the in-dash receiver is switched off press the D button to turn off the lights. You can see this operate near the end of this Pioneer You Tube video: ua-cam.com/video/DVgmzbKKoAo/v-deo.html You can find more videos about Pioneer DEH-S4010bt here: ua-cam.com/video/icdWHqbS-7o/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
I need directions how to preset radio stations on a older home stereo model S X - 201
For support with this product, please contact Pioneer here: pioneerglobalsupport.zendesk.com/hc/en-us
Plz tell me how to initialize pioneer remote to mixtrax pioneer stereo. Stereo already reset. Now remote is not working.
I recommend to replace the battery on the wireless remote control. The included remote control is an infrared remote. No set up with the in-dash receiver is necessary. To test the wireless remote control, point the remote at another Pioneer in-dash receiver to see if it operates. You can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
I’m pressing the M.C knob while the auto ratio is off (clock display) but this doesn’t do anything on my MVH-S300BT
The vehicle needs to be switched on, so there is power to the receiver. The first step is to switch the receiver off by pressing and holding the SRC button for a few seconds. Next Press in on the volume control to access the Initial Menu and System Menu. Please watch the video with the sound on. This is explained in detail: ua-cam.com/video/Z6g0EOPZL0c/v-deo.html You can find a full playlist of How To video from Pioneer about MVH-S300BT here: ua-cam.com/video/Ccv6qKK3L98/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
What should i do if my rear speakers aren't playing/showing up in the balance screen
It sounds like you may the system set up in Network mode or, you may have the system set up as rear output subwoofer system. What model of Pioneer in-dash receiver do you have? The model number is printed on the face of in-dash receiver, usually near one of the corners. You can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
@@deckerdotto6035 its a DEH-S31BT
@@deckerdotto6035 thanks man
On Pioneer DEH-S31BT you have the Rear Speaker Output settings set up as a Subwoofer Output. To have a Fader control (front to rear) You need to set up the Rear Speaker Output as Full Range. You can see how to make that adjustment here: ua-cam.com/video/Z6g0EOPZL0c/v-deo.html You can find more videos about Pioneer DEH-S4000BT, very similar operation to Pioneer DEH-S31BT here: ua-cam.com/video/hiDOCp75UAI/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
Thanks for the vídeo, why i cant control the sound of My fisical ipad volume button? What did i make wrong?
Pioneer in-dash receivers are not designed to be compatible with iPad. You can find more videos about Pioneer DEH-S4000BT here: ua-cam.com/video/h9Hp2w-aUF4/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
Can anyone tell me where the fader and balance adjustments are?
What Pioneer in-dash receiver model number do you have? If it's DEH-S4000BT, take a look at this video for the Audio Settings: ua-cam.com/video/hiDOCp75UAI/v-deo.html You can find a full playlist of How To videos about Pioneer DEH-S4000BT here: ua-cam.com/video/tMLFL8K3gMM/v-deo.html Please be sure to install the latest firmware for your Pioneer DEH-S4000BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-S4000BT#downloads and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
I have a mvh-21bt power on displays station song etc…but absolutely no sound. Help please
Please be more specific with your question. Are you using the in-dash receivers speaker level outputs? Are those wires connected directly to the speakers in your vehicle? You can learn more about wiring your Pioneer receiver here: ua-cam.com/video/kR2MO2kwFug/v-deo.html
Are you using an external amplifier? Does your vehicle have a factory amplifier? is the amplifier on? You can find more videos on Pioneer's UA-cam Channel here; ua-cam.com/users/pioneerelectronics
When I drive the radio starts doing whatever it wants this is frustrating.. any tips or help please ? I hope it’s something simple
Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? What do you mean, "starts doing whatever it wants"? Are you using a steering wheel remote control adapter? What make, and model of steering wheel control adapter? What type of vehicle?
Is anything plugged into the receiver's USB port?
Did you press the receiver's microprocessor reset button? You can see it in this How To video from Pioneer: ua-cam.com/video/o6iawP279R4/v-deo.html
You can learn more about wiring your Pioneer receiver here: ua-cam.com/video/kR2MO2kwFug/v-deo.html
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
What is the oe number on the remote? I lost the remote and I don't know which one fits on that player? Please help me...
What is the model number of your Pioneer in-dash receiver? In what country will this product be used?
@@pioneerelectronics Serbia
@@TheDakPak Please contact Pioneer in Europe for more information: www.pioneer-car.eu/eur/support/local-support
The part number for Pioneer in-dash CD player remote controls is QXE1044
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
What type of radio is this I gotta find a microphone
The receiver shown in the video is Pioneer DEH-S4000BT. To buy a microphone, you can contact Pioneer Customer Service in the US here: www.pioneerelectronics.com/PUSA/Support or in the US call 1-800-421-1404. You can find more How To videos about Pioneer receivers here: ua-cam.com/video/hiDOCp75UAI/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
3:14 System update
Yes, at 3:14 the video mentions the System Update. Do you have a question about that process? What is the model number of your Pioneer in-dash receiver?
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Every time I switch off my ignition I have to constantly pair up my Bluetooth settings for my phone
If your radio station presets and clock along with Bluetooth settings reset each time you start the vehicle you may have an incorrect wiring connection to the vehicle. Focus on the in-dash receiver's Yellow Wire. The Yellow Wire provides constant power from the vehicle and keeps these settings. Do not combine the Red and Yellow wires together. You can find more information about wiring your Pioneer in-dash receiver here: ua-cam.com/video/kR2MO2kwFug/v-deo.html If you have a Pioneer DEH-S4100BT please be sure to have latest firmware installed. You can find it here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-S4100BT#downloads You can find more videos about Pioneer DEH-S4000BT here: ua-cam.com/video/tMLFL8K3gMM/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
Did this work fory you John?
If your radio station presets and clock along with Bluetooth settings reset each time you start the vehicle you may have an incorrect wiring connection to the vehicle. Focus on the in-dash receiver's Yellow Wire. The Yellow Wire provides constant power from the vehicle and keeps these settings. Do not combine the Red and Yellow wires together. You can find more information about wiring your Pioneer in-dash receiver here: ua-cam.com/video/kR2MO2kwFug/v-deo.html If you have a Pioneer DEH-S4100BT please be sure to have latest firmware installed. You can find it here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-S4100BT#downloads You can find more videos about Pioneer DEH-S4000BT here: ua-cam.com/video/tMLFL8K3gMM/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
I don’t understand. I switch the receiver off, have the clock on, but i press the volume control but it never gives me the menu everyone else gets. What am I doing wrong?
What is the model number of your Pioneer in-dash receiver?
Demo option??
If you want to see the demonstration again, after you have turned it off. You must do a System Reset. You can see it here: ua-cam.com/video/Z6g0EOPZL0c/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Plz help how do u change the language to English mate
Here is the spot in the video above showing language selection. ua-cam.com/video/Z6g0EOPZL0c/v-deo.html You can find more videos about Pioneer DEH-S4000BT here: ua-cam.com/video/icdWHqbS-7o/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
I had the same problem I thought itvwas tech speak Sat their for half hour till my neighbour came to the rescue and said its not in English 😂😂😂😂
You can find more videos about Pioneer DEH-S4000BT here: ua-cam.com/video/hiDOCp75UAI/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
It seems pretty complicated for the average laymen like me, I'm an older individual and call myself techno-dumb. Can you help me please?
What is the model number of your Pioneer in-dash receiver? This is usually printed on the face of the in-dash receiver and starts with the letters DEH or MVH.
Please be a little more specific with your question. What are you trying to do with the receiver?
You can find a full playlist of How To videos from Pioneer about similar receivers here: ua-cam.com/video/Fm2U1Ck1qlU/v-deo.html
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
I need help my android dosent auto connect anymore
Be sure your phone is not connected to another device like a headset or portable speaker. This can block the in-dash receiver from connecting. Turn your phone Off and back On. Does this correct the issue? If not, I recommend to delete the all phones from the in-dash receiver's Bluetooth Memory. Do that in the Bluetooth Settings Menu seen here: ua-cam.com/video/8t8hiqq2kCI/v-deo.html Next delete the in-dash receiver from the phone's Bluetooth Memory. Restart the pairing process from the beginning. You can see that here: ua-cam.com/video/8t8hiqq2kCI/v-deo.html If necessary, do a System Reset seen here: ua-cam.com/video/Z6g0EOPZL0c/v-deo.html You can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
It's been a nightmare ever since I bought the system I can't take my eyes off the road the screen colors are so I'm bright don't buy this system.
Please read this complete response. It contains answers to several questions and it may help you set up the receiver in a way that works better for you. What is the model number of your Pioneer in-dash receiver? To turn the receiver off, press and hold the SRC button for a few seconds. You can learn about it in this Pioneer How To video: ua-cam.com/video/Xa2xUgMOxRc/v-deo.html When you switch the receiver off, if you still see an active screen, you may need to switch off the receiver's "Demonstration Mode" You can learn how to switch off the demo mode in this Pioneer How To video: ua-cam.com/video/to2eXLPBnJI/v-deo.html If the display is too bright, you can dim the lights on the receiver at night by using the Dimmer function. You can learn how to use the dimmer function in this Pioneer How To video: ua-cam.com/video/pMKUPcGE26c/v-deo.html If your receiver has multi-color illumination, you can learn how to set up the colors in this How To video from Pioneer: ua-cam.com/video/sO3gFyCExFA/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Hay here’s an idea !!!!!
Why don’t u guys make the algorithms to operate your stereo even more complicated and impossible to remember, that way nobody will buy your product and you won’t have to make these videos .
If you have a question about the operation of a Pioneer car audio product please ask that question here. You can find a full playlist of How To videos from Pioneer about audio receivers here: ua-cam.com/video/kKN9BkchGVY/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics