Це відео не доступне.
Перепрошуємо.
Turbo IS300 gets more upgrades! (Almost ready for the dyno!)
Вставка
- Опубліковано 31 лип 2024
- In this video, I discuss the changes and upgrades that have been made to the Turbo IS300 over the course of the last couple months. We're finally in the home stretch of this last round of modifications which means it's almost time to get the car back on the dyno to see if we can make a little more power!
Thanks for watching!
Build details and other cool stuff: www.twojayHQ.com
Instagram: / two.jay
Some of the major build details:
- V160 Getrag
- RPS Twin Carbon Clutch
- Eagle Rods (ARP 625+ rod bolts)
- CP Pistons (.250" wrist pins)
- ARP 625+ Head Studs
- ARP Main Studs
- EFR 9280 (1.05 A/R Turbine Housing)
- Suprastore Quicksilver Exhaust Manifold
- Custom 3.5" Turbo-Back Exhaust
- TiAL MV-R 44MM Wastegate (Open dump)
- TiAL Q-BOV
- Treadstone TR-1045 Intercooler
- Custom Forward Facing Intake Manifold
- RMR 90MM Throttle Body
- Custom -8AN Fuel Rail
- Aeromotive FPR
- ID1700 Injectors
- 2x Walbro 450 LPH In-Tank Pumps
- VP C85 Fuel (Ethanol)
- AEM Series 2
- IGN-1A Ignition Coils
- BC 272 Cams
- BC Springs / Retainers
#is300 #2jz #turbo #lexus
For a small channel you do insanely good edits, And make very quality videos. 👌
Thank you!
This car needs to be in magazines! Super clean as always!
Alright now let's not get out of hand here! 😉 Thanks dude, appreciate the support as always! I have a couple shirts ready for the next time I see you! 👍
@@twojay Nice! cruise up to the warehouse if you're bored of working on the masterpiece!
Awesome update! Glad you're making progress.
Dude this was a good walkthrough/explanation of what you’ve done to your car. Again. Keep it up brother. We appreciate the time you took to make the video!
Thanks man! Glad you enjoyed the video! =)
Hell ya! Hope to see more soon!
Excellent video and I think this has been the cleanest project car that I have seen!!
Thank you for showing every detail !!
Thanks! Glad you enjoyed the video!
Amazing work bro !!!
Serious dude I can't get enough of ur vids lol film what you can love that car!
Looking amazing man!
dream build right there
Very nice Work!! 👍🏼👍🏼
As always very detailed video. Hopefully one day I can take my 2000 GS300 to the next level.
Love the car bro👍💯. Thanks for all the info it helps a lot.
Thanks for the support!
beautiful is
I love this page even if I’m the only follower
We miss you bro.
Saw you Sunday morning on the side of HWY 18 at like 7:45 doing a photo shoot. Car looks killer man, well done!
Haha, nice! It had been a few months since the car was on the road so I stopped a few times to make sure no parts were falling off. Thanks man!
2jay this car is awesome
Those Wilwood brakes are seriously impressive. I'll have to look into those for my 2001 IS300 as I do want a high quality front brake kit that is more powerful but also lighter than stock. Do you know if they are still available as new? Thanks!
Beautiful❗️❗️😍🥰😘👍🏾
What intake manifold were or are you using ?
awesome build, love the attention to detail. I was curious if you have a video going over your engine and trans build.
Thank you! I don't have a video but some of the build details are in the video description.
@@twojay awesome thanks. Are you running a ge or gte head and block? Vvti or non?
@@Chris-ww9uo This was all GE VVTi.
@@twojay very nice. Getting ideas...thats dangerous
Where can i find a abs valve cover for my is300
What is your wheel specs ??
I just bought this brake kit but obviously doesn't fit stock is300 wheels 😂
does anyone know the sizes of the wheels he's running? the fitment and just everything in general look absolutely beautiful on the IS
The wheels are Work CR Kai 18x8.5 +38 (front) 18x9.5 +38 (rear) and tires are BFG Sport Comp 2 235/40/18 (front) 255/35/18 (rear).
Fucking goals!
What for a Exhaust Manifold are you use? I cant find a usable Manifold for Is300 😔
It's a SupraStore exhaust manifold.
Ok thank you! 👍🏼✌️
BBK looks good. I should have weighed my figsengineering setup. I hope you done rub now the wheel it pushed out a mm. I wanted to know why you wrap your headers and not coat them? Also what intake manifold is that? FSMoto? Awesome channel I can’t wait for the Dyno.
Thanks! I actually took the car out yesterday and luckily didn't have any rubbing up front despite the wheels being pushed out a little further now. My exhaust manifold is coated and wrapped. The intake manifold is one that I built myself with parts from Ross Machine and the factory lower intake manifold section.
Are you selling the 75mm Ross tb?
@@Brinks84 I would consider selling it. Are you interested?
two jay yea I would
@@Brinks84 Do you have Instagram? If so, shoot me a message there. @two.jay
hi buddy !
did you find the leak ?
Not yet! I did pick up a leak down tester but haven't had a chance to hook it up yet.
Can I buy the old exhaust
I would consider selling it, but have no interest in trying to ship it. Where are you located?
@@twojay I work in Colorado and live in Utah
@@tannerbair5119 Oh nice. I am in Southern Utah. If you're ever down here, I would be willing to let the old exhaust go for $200.
Come on man.. No start up🤔🤔🤔.😂😂😂
blurry intro is WACK
👍👍👍