Yep just done mine today your video support is very clear for anyone that has no idea. Thank you Daniel and Paul for all your help on our 2010 Nissan D40 2.5Ltr engine rebuild it runs like a dream and sound great too with all the mods we have little or no black smoke. 100% don't waste your time mucked around, We recommend them to anyone.
Hi Daniel, just put a reco motor in my 2013 yd25 2.5 after 13000km its starting to nock and wont idle unless i keep the revs up. Put a computer on it no codes or engine lights while it was on we re set the injectors made no difference Iv been told it could be injectors or bad fuel or vac pump, any ideas would be helpful. Cherrs
@yd2532 hey bud Thai I think D22. It starts and runs for 3secs unless iv got the hi idle button on and the once it gets warm then the knock starts, but once I turn the hi idle button off it will run for 30secs
@yd2532 new injectors, put the com on it and programmed them in. The od thing was the tec said that they all had the same code I believe he said, and then we put them to what they needed to be and didn't make a difference
too late now but for future reference, u can use a dremel to cut a straight line in the head of the bolt, make it deep enough and then use a flat head screwdriver in the new slit
There is 2 ways of replacing it. You can can call me before you do it. Doing it without removing the fuel pump chain is hard cause you can pinch the fuel pump oring.
@@Bennyxgfalconute cool if your doing the chains at the same time it will be easy. It's just held in by 2 etorx and the fuel lines then it just pulls out the back. put grease on the fuel pump oring when you reinstall so that you don't pinch it
I've heard these beige/grey Nissan genuine ones (denso's) are garbage and some are shot right out of the box, a lot of word was spread about the blue versions of them. Is all this true or just misinformation?
Yep just done mine today your video support is very clear for anyone that has no idea.
Thank you Daniel and Paul for all your help on our 2010 Nissan D40 2.5Ltr engine rebuild it runs like a dream and sound great too with all the mods we have little or no black smoke.
100% don't waste your time mucked around, We recommend them to anyone.
great teaching, these videos are helping me a lot to solve some problems with the nissan engine, thanks partner, hugs from Brazil.
Really appreciate your video mate!
Straight to the point. Love your work.
Wouldn't the grease contaminate and/or possibly block the valve?
hello
it needs calibration after installed a scv valve on d40?
or only ecu reset?
Does the 2018 np frontier automatic carry fuel pump in fuel tank,
Yep!
Hi Daniel, just put a reco motor in my 2013 yd25 2.5 after 13000km its starting to nock and wont idle unless i keep the revs up. Put a computer on it no codes or engine lights while it was on we re set the injectors made no difference
Iv been told it could be injectors or bad fuel or vac pump, any ideas would be helpful. Cherrs
@@ChrisFleming-s5g ye sounds fuel related is it a D40 or d22 Spain or Thai?
@yd2532 hey bud Thai I think D22.
It starts and runs for 3secs unless iv got the hi idle button on and the once it gets warm then the knock starts, but once I turn the hi idle button off it will run for 30secs
@@ChrisFleming-s5g did you put new or reco injectors in the new engine?
@yd2532 new injectors, put the com on it and programmed them in.
The od thing was the tec said that they all had the same code I believe he said, and then we put them to what they needed to be and didn't make a difference
@@ChrisFleming-s5g I've had people get *new* injectors from eBay and they gave issues. Did you source then from a reliable place
Is the suction valve control cut off the fuel
Hi! I have a fluctuating idle on d40 that goes together with a small sound of diesel nock if u lesson carefully on it
Hi there . I just done replacing the control valve and my car is still loosing power . Want to know what next step can i do to fix it
try an ecu reset or it might need a rail plug
Hello !!!
If the SCV is bad or dirty and I scan my nissan dy25 pick up, what code will the scanner read ????
Can I know if you can put it the opposite way around
Yes you can
Hi, travelling few months back and when going 110 on inclined hill, loss power and started to blow black smoke. Would this resolve the problem??
I got the exact same problem
Boost control solenoid I'd say
Pretty common
had the same issue what was your fix in the end ?
This for fuel system or air system?
Fuel
Attempted replacing my scv but the bottom bolt stripped and I can't undo it, any tips of getting to it.
too late now but for future reference, u can use a dremel to cut a straight line in the head of the bolt, make it deep enough and then use a flat head screwdriver in the new slit
Hello, I have a Nissan Navara that starts without pumping diesel and stops
hello, i have a nissan murano z51 2.5 dci i don't know how to set the timing please help.
Hi just wonder what size torx bit you need
They are Allen keys 5mm
@@yd2532 thanks
How you Diagnose a bad scv? Greetings
Look at live data and check if rail pressure moves at idle
Thank you sharing the knowledge so how to reset EC
Search D40 ecu reset on google it's with the key and accelerator pedal
@@yd2532 Thank you so much
hi daniel, do u guys stock the SCV for the 140kw vsk?
Not for the 140kw they use a long body. Navlife might have the.
What’s a new one of them worth genuine?
We have genuine short body SCVs for $220
I have a code for fuel pressure regulator. Is this the same?
Scv does regulate fuel pressure so it could be
Is it hunting at idle or stalling? Could also try an ecu reset
It doesnt flucuate or stall, it just goes into limp mode after idling fot 30 seconds. Wont do it if i dont idle for 30 seconds.
@@nickbest573 try an ecu reset first if that doesn't fix it then try a genuine scv
@@yd2532 its been dyno tuned @ 126kw, for toweing. Egr,dpf delete. 3inch exhaust. Resetting ecu would make problems for my tune im gusssing.
Hey mate can video on changing the fuel pump it's self plz
There is 2 ways of replacing it. You can can call me before you do it. Doing it without removing the fuel pump chain is hard cause you can pinch the fuel pump oring.
@@yd2532 I am doing the timing chain at the same time was hoping for tip for doing in the Ute
@@Bennyxgfalconute cool if your doing the chains at the same time it will be easy. It's just held in by 2 etorx and the fuel lines then it just pulls out the back. put grease on the fuel pump oring when you reinstall so that you don't pinch it
@@yd2532 thanks mate appreciate the advice
Where are you located???
What sort of grease are you using on it?
The one I ordered came with instructions which tells to just use engine oil.
Same for D23 ??
@@taronmateariki6919 if it's a yd25 d23 then ye
@@yd2532 is that a standard engine for a 2017 rx model ? How do I check? Sorry 🤦♂️
@@taronmateariki6919 depends on what country some countries the d23s still have yd25s some have ys23
@@yd2532 oh yeah nah I'm in Melbourne and pretty sure it was made in aus but not sure , how do I check what type of engine it is
Cheers for the help as well 🙏🙏
How much will this cost
Mine was 120 euros
I've heard these beige/grey Nissan genuine ones (denso's) are garbage and some are shot right out of the box, a lot of word was spread about the blue versions of them. Is all this true or just misinformation?
Sounds like misinformation. There is long and short body scvs the one in this video is a short body you gotta get the right one for your car
I wish i could send you my YD25 engine to overhaul.. mechanics at my side are shit hell...
Need a new clock spring Nissan Navara D40
Nz or aus ?
Hi I keep losing power RPM set at 1500 could it be this
Does it blow smoke?
@@yd2532 no it doesn't blow any smoke
@@yd2532 I blow smoke, is that a symptom?