How to Replace Front Left Inner Tie Rod 2007-2011 Toyota Camry

Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00634
This video shows you how to replace the inner tie rods on your 2007-2011 Toyota Camry. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
Tools you will need:
• 14mm Wrench 1aau.to/o5Y/1AXAA00010
• 17mm Wrench 1aau.to/o5Y/1AXAA00010
• 19mm Wrench 1aau.to/o5Y/1AXAA00010
• 21mm wrench
• 17mm Socket 1aau.to/obN4/1AXAA00015
• 21mm Socket 1aau.to/oaui/1AXAA00043
• Wire Cutters
• 1/2 Inch Ratchet 1aau.to/oaui/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/obsu/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obN4/1AXAA00015
• Torque Wrench 1aau.to/oaVZ/1AXAA00044
• Gloves 1aau.to/oaCB/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oakd/1AXAA00068
• Jack Stands 1aau.to/o8j/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@ELopez2185]

Aren’t you supposed to count how many spins it takes for the outer tie rod to come out for alignment purposes?

[@danielscott9137]

A few things, click once with a torque wrench. Directional rotors are backward. The tie rod end could be squared up. What's the deal with the zip tie on the boot?

[@elimarsemidey7889]

The inner tie rod 50 torque pounds of the Camry is the same torque than the 2010 toyota Corolla XRS? I just ask because both cars have a 2.4 Camry motor. Thank you.

[@sawloon2085]

Should we bend the washer before put on dust cover?

[@Thetexaschainsaw]

Whats the name of the tool you using to remove inner tie rod?

[@TechDadOG]

I know we are here for inner tie rods but that slotted and drilled rotor is installed backwards and it's driving me crazy 😂