How to Replace Ignition Switch 07-16 Chevrolet Suburban
Вставка
- Опубліковано 13 чер 2018
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/88/h/ignition-switch
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, worn or faulty ignition starter switch. This video is applicable to the 09 Chevy Suburban.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oam6/1AXAA00013
• 10mm Socket 1aau.to/oYR/1AXAA00017
• Ratchet 1aau.to/oaoz/1AXAA00016
• Socket Extensions 1aau.to/o79/1AXAA00015
• Pick 1aau.to/oir/1AXAA00037
For More Info visit us at 1aau.to/h/bnQ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Awesome explanation, made it super easy!!
I just performed an ignition removal using this video. Everything was explained in detail. A total success. Thank you so much.
When everyone told me even a full time mechanic it was a starter problem for me I knew I just knew it wasnt the starter I changed out the ignition switch in only like 10 minutes (the video made it super easy) and boom car started up no issues 🙏 thank you for this video it really helped alot
Thanks so much! Saved me I’m sure a nice bit of money being able to DIY. You did forget to tell people to reconnect the Orange connector though just an FYI
This guy is absolutely awesome!! Fixed our key issue for $25.00!! This video is step by step and really made it easy for me to follow. Thank you so much!
+Melinda Long Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Oh man, this dude is the bomb!!! Simple and easy/relaxed removal and installation of what could be a nightmare repair!!! I'll subscribe to this channel for sure. High regards their young man!
This is so phenomenal. Thank you for making this!
Awesome video, simple to follow. I fixed my 2007 suburban ignition switch issues for $20 and 1 hour of time. Thanks!
+Ryan Bocook Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high quality auto parts. 1aauto.com
I really love watching all of your videos you have a pleasant voice and sounds clear. And you go straight to the point and shows exactly how it's done. I really appreciate that, I watch a lot of your videos pertaining to Chevrolets. It's been a big help
This was the best service video I have EVER seen.
I hope this is the issue with my 13 Suburban.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +David Johnson
You showed us alot concerning the ignition switch.thumbs up !
You didn't reconnect the orange wire.
Thank you! Have to attempt this on a 07 yukon later this afternoon and im sure this will help!
Thank you this was super freaking easy took me less then 30 min… I had a damn glitch that would not let me drive with ac / radio and a signal on at the same time…and if it was not coming from this it sure fixed it…
excellent instructions! Thanks!
This helped me a lot, but after installing the key cylinder the key wouldn’t come out like yours. I had to depress an actuator to release it. Then once I hooked the battery up it was good to go. 2006 Cadillac DTS
hello sir very good video I was wondering I couldn't get the screwdriver to turn in when I put it in the lock cylinder, so I just stuck the key in with the cylinder and then I got stuck, do you have a way to pull the key out?
Great Video! Everything I needed to now! Thanks!!
+Mortal Man Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Thank you guys so much. Quality work and guidance
Fixed transmission issue I was having on my 2007 Tahoe. Thank you
+R Mendoza Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Do you have any videos on this type of vehicle on transmission type and transmission solenoid? I do this on my own can't afford to take it to the shop. Any information would be greatly appreciated 🙏
Ty awesome video!
Thanks for the video! Do you think this would be a similar fix in an 07 impala
+KalebMchenry 39 This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com
do you have a video on how to remove a 2007 gmc acadia ignition lock cylinder?
I have a trans code with this?...is the ignition switch the one with the key with it or the little box with connector? I look up the part and I get 2 kinds of switches?
Would this process work if my key broke inside the ignition cylinder? Instead of taking everything out, the cylinder would be the only piece taken out correct?
So precise with every step, thank you so much
Don’t know if I missed it do you keep the orange wire disconnect?
What's the orange wire please?
is there a video with ltz 2015, button start version?
Thank you
+Jac AZA Thanks for checking us out! 1AAuto.com
This is the same for a 2009 gmc sierra?
What is the function of that top white plug? The one with the two green wires.
Rings the chime when key is inserted and door is open.
Question can a bad ignition switch drain the battery?
Is this the same procedure for a 2013 Chevy traverse? No programming needed?
pair of channel locks
Can you do an ignition switch replacement on 2009 impala?
We're always cycling through cars filming hundreds of common repairs for common vehicles every month. We'll add this to our list of repairs to film. Check back again and hopefully we'll have it soon. +Ronbon
Do we reconnect the orange why or why did u leave it unplugged answer please??
Do you have to disconnect the battery ?
My ignition cylinder will not remain in the cylinder when I reinsert it. Any suggestions? Everything else seems to be fine. Thanks
Will this help for my tahoe to start with my key fob i try reprogram my key fob and i still won't work my push to stary in key fob
+Omar Rendon Thanks for your inquiry. There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause.
What if you can't get the lock cylinder to turn over , how do you get it out ?
what is the little black box that holds the ingintion cylinder
Thank you for checking us out! The black box-shaped part I believe you are referring to is the theft control module. Hope this helps you out! +Juan Hinojosa
Do you have to reprogram the key?
How do I get the cylinder out if I cannot turn the key?
I used a set of channel lock pliers to 'get past the sticking' and then I was able to get it to the start location to depress the release and pull it out.
Having the same issue , how did you get yours out ?
It appeared you forgot to connect the first wire you disconnected. Orange wire.
+Sir Sweetness Thanks for the feedback! We'll pass this info along to our production team.
@@1AAuto I was wondering if anyone else caught that.
Would I have to get my key programmed again if I switch it out?
+Rafael Varela You would not need to reprogram the key.
1A Auto Parts thanks a lot
will this fix security lock issues
+Nathan Marshall We wouldn't be able to say here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Will it still start and run without the thieft module in it? Or even plugged in?
I change it but my truck stil want shut off
Will it start if you unplug the theft system?
I changed the switch but now can't get the car to turnover at all. Any help would be greatly appreciated
Will this fix CEL code P1682?
+rocco's taco's! Since there could be multiple reasons why you’re experiencing this difficulty with your vehicle, I strongly recommend that you have a reputable mechanic inspect it. They’ll be able to troubleshoot the problem and tell you what part or parts you’ll need for the repair.
Thanks
Does it work for a 2007 chevy tahoe
+Gaspar Andres It may be a similar procedure. Thanks for checking us out!
1A Auto Parts no problem thank you
Do u know if it ever worked on the 07 tahoe?
Switch this part with new one now my 2012 Chevy ecpress van won't start.
what is the orange wire and why unplug it?
+Seth Williams The orange wires are illumination so that is the shift indicator lamp wire. Thanks for watching.
My 07 suburban keeps running when you take the key out could this be the problem?
dan NEWYORK I have the same problem how did you get yours fixed
+dan NEWYORK If the ignition is in the on position and you can remove the key from the ignition switch, it's worn out. Then yes you should replace the ignition switch.
Will this fix code P1682?
+Mauricio Medina We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I have the same code. i wondering the same thing
Hay so my charging system is good but van will start then i will shut it off 10 min later then go to start again and it acts like battery is dead then got to jump it but it doesn't do that all the time just once in a while it's like crazy there's nothing on draining it check the charging system everything's perfect I would just solve the problem 09 Chevy Express van
Have the same issue in my suburban. Today it actually turned the truck off and on about ten times while driving. Complete power loss like dead battery. Half second later it would fire back up without touching anything. Ut did this repeatedly until I shut it off let it sit for ten minutes. Then it fired up and drove great for another hour. What a ride
@@corporategrind8366 did you ever find out the cause of this?
Followed every step to the video but my vehicle won't start now....
What if my key lock gets stuck halfway in?
Did you find a fix?
This little orange wire ain’t trying to come out 😢
Assembled in mexico🙄
+Chris Morris Thanks for checking us out. 1AAuto.com
Title says how to remove ignition without key then you use the key what is wrong with you people
More like what’s wrong with you and your garbage comment. I bet you wouldn’t have the balls to talk to someone like that if they were in front of you, punk