Hi I have a 2007 sierra sle 1500 and they key is worn out and wont turn. I called a local parts supplier and they said that you need to do the reprogramming etc, why can't I just replace the cylinder with a new key? Great video and thanks.
Where he talks about matching up the gear will not work. 2:15 It sounds right but DO NOT DO THIS. Befor removing the ignition switch, reinstall the lock cylinder The gear is spring loaded and it must be all the way over which you can not do once you remove the switch.. Another video I have seen says to put the lock back in and move it before removing the switch.. I did it his way and now it will not start. The key will not rotate enough to send power to start the engine. If anyone knows how to make it work his way. PLEASE LET ME KNOW.
I had to remve everything In this video to replace the shift controller. If the truck does not start after you are done but the lights all power on you have the gears and inner ignition not lined up. Make sure it all goes back together.
If it is bad you will know by two things (from personal experience.) One: when you exit the vehicle with the key in hand the key reminder dings. Two: the remote start wont work. Lights will blink but not start the vehicle. As said this is from personal experience. 2014 Chevy Silverado 4x4 with remote start.
If I take the old transponder ring down and put it all back together. It should still recognize my old key correct? Im afraid to take it off and wipe out the program
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I had the tumblers replaced and put the same numbered tumblers back In and didn't have to make a new key thank goodness 😊
I did all that dash lights come on but won’t start
What do you do if the key/cylinder wont lock back into the hole?
Hi I have a 2007 sierra sle 1500 and they key is worn out and wont turn. I called a local parts supplier and they said that you need to do the reprogramming etc, why can't I just replace the cylinder with a new key? Great video and thanks.
Where he talks about matching up the gear will not work. 2:15 It sounds right but DO NOT DO THIS. Befor removing the ignition switch, reinstall the lock cylinder The gear is spring loaded and it must be all the way over which you can not do once you remove the switch.. Another video I have seen says to put the lock back in and move it before removing the switch.. I did it his way and now it will not start. The key will not rotate enough to send power to start the engine. If anyone knows how to make it work his way. PLEASE LET ME KNOW.
I had to remve everything In this video to replace the shift controller. If the truck does not start after you are done but the lights all power on you have the gears and inner ignition not lined up. Make sure it all goes back together.
What do you do if the key will not turn to start with
What is the little white push button plug for on the top?
How to change the key cylinder for a 2007 GMC half ton pick up
Could do everything accept the pick to get the actual key ignition out wouldn't work
Did you have to reprogram the switch or anything like this. My truck has same problem won’t turn it’s stuck
What was the issue ?did you get it resolved?
what is te purpose of this switch and how do i know if this switch is not working?
If it is bad you will know by two things (from personal experience.) One: when you exit the vehicle with the key in hand the key reminder dings. Two: the remote start wont work. Lights will blink but not start the vehicle. As said this is from personal experience. 2014 Chevy Silverado 4x4 with remote start.
good
How to fix 2007 GMC pick up truck key won’t turn
If I take the old transponder ring down and put it all back together. It should still recognize my old key correct? Im afraid to take it off and wipe out the program
What if swich key want turn
Great video
This video needs to be deleted you have 80% of these viewers doing it all wrong
Now the codes are gone but it still won’t start 😂