I mean. I did it with a Rust-Oleum rattle can in my barn. It came out amazing but seriously be prepared to spend a lot of time sanding with various grits of sand paper. And then to spend the time waxing and polishing after you sand your clear coat. (And I mean like. A LOT of time. Days, weeks even. It's a work of patience if you wanna be cheap like me)
Rattle Can Pro here. Motorcycle parts are great way to explore painting at home.I do intricate lace paint jobs on fenders and tanks.My pinstripe buddy makes it clean. Great Tutorial Mr Jeremy!! Love your work!🤘🤠🤘
Thank you for this video, I am wanting to attempt successfully to paint my fenders and tanks for my Harley. Your video and your straight forward and down to earth instructions are awesome. Thank you!
I DONT use degreaser or brake cleaner. I use water with alcohol mix (much cheaper) and then wax and grease remover made for pre paint. I always like to etch prime before primer even tho its dtm, or epoxy they say is best for full raw metal pieces. Nice vid tho I love to see diff ways people do things.
Fabulous video! I've done some painting that's turned out fairly decent, and can tell with a few changes (based on this video) I could take it to the next level. Thank you!
I and other professional painters will actually use Rustoleum etching primer. Works great. Great for bare metal. For plastic us their Primer with sealer.
@@TJBRUTALCUSTOMS WTF?? Why did you get defensive??? I did not say your guy was wrong or criticizing him. I offered another alternative to viewers. And, so what about your 5 shops; means nothing. Your guys didn't make the covers of motorcycle mags (when they still published them before internet) and are award winning painters like guys I know. I just received my second bike of the month award from Suzuki ,within a years time, for my vintage bike builds. I am really disappointed in your response. I am a long time follower and I recently started my own bike builds doing bobbers, using Shadows for the most part. You were an inspiration to me and I was going to order parts from you. Good job buzzkill. Hello other vendors. Geez.
Watched the whole thing, great info. Thanks for taking the time to demonstrate the correct way to do this. Background music is a bit annoying though. Thanks again.
I live above my garage and will plastic off the garage to try and control for dust. I plan to paint with the door open and then close late at night. The only fumes that should linger should be while waiting to cure. Thoughts?
I'm not sure, I don't really ever mess with plastic lol I usually throw it away 🤣 All you need to do is gently rough the surface with a scotchbrite pad
Thanks for the video. If I do any plastic parts that flex do I need a different paint than I would use on the tank or is there an additive that I should use? I want the bags and your pack to match the fenders and tank.
So if i wanted to use an airbrush to paint som details. At what step should i do that. Is it after primer or after baselayer? You would probably have to do it at a more comfortable work area for this part. So moving it would probably be nescesarry. And preferably be able to Apple maskingtape as well.
@@TJBRUTALCUSTOMS just giving you a hard time brotha. I’ve literally bought all my parts from you besides the gas tank and exhaust which I’m just waiting to gather funds for. It’s a TJ build for sure! I appreciate the response.
This is awesome information and great presentation. Pleeeeaaase stop the music :) it's so distracting and horrible. If you must have it why not Hawaiian to match the shirts?
14:31 - "...we'll shoot some pictures and video of it later so you guys can check it out..." Keeps watching for promised pictures and video. none Disappointed...
Explanations lacking at best. Don’t title something HOW TO paint at HOME and then use a pro gun and a freaking paint booth for the video. Paint it like joe average would AT HOME.
This reminds me of a timeless quote "if you dont have anything good to say, shut up" - Justice Beaver 🥰 Please note that many others have found great value in my efforts to share information and educate. Please do complain some more on my other videos. i bet ya cant! ;) I will make the greatest educational videos you have ever seen with even more background music even harder now.💪🏽 Just for you. Thank you for commenting! Make sure to like and subscribe so you dont miss any more of my useless videos! 😃
Ron Jeremy to the rescue
does a body good! HAHA!
@@TJBRUTALCUSTOMS HAHA absolutely. great work
Came here to watch Ron Jeremy paint a tank, left having watched the most informative paint video I've ever watched. Great job!
Pablo Escobar
I was gonna comment the same thing then seen yours lol great minds right
😂
😂😂😂🔥
😂😂😂😂 Ron Jeremy
Love these "paint at home" videos guy is literally in a paint shop with decent gear and if not that's one hell of a paint set up.
Its his garage. A paradise for a man. Hence our shirts
@@TJBRUTALCUSTOMS
This is completely not “at home” set up.
What a chewy liar!
That’s why nobody likes you people. You’re grifters. But we’re learning.
This was 100% what I was NOT looking for, but I watched the whole thing anyway.
I mean. I did it with a Rust-Oleum rattle can in my barn. It came out amazing but seriously be prepared to spend a lot of time sanding with various grits of sand paper. And then to spend the time waxing and polishing after you sand your clear coat. (And I mean like. A LOT of time. Days, weeks even. It's a work of patience if you wanna be cheap like me)
I had pretty much the same experience (with rattle cans)... it CAN be done. Patience is key.
I forgot I had a professional well ventilated paint studio and spray gun in my house
@@TJBRUTALCUSTOMS you probably don't understant. It was sarcasm... xD
He said multiple times you can do it in a garage with a spray can. I don't know how you missed that.
Rattle Can Pro here. Motorcycle parts are great way to explore painting at home.I do intricate lace paint jobs on fenders and tanks.My pinstripe buddy makes it clean. Great Tutorial Mr Jeremy!! Love your work!🤘🤠🤘
Thanks for the tips! and thanks for the comment!!
Damn, Ron Jeremy knows his stuff.
Thank you so much for letting us know and deeply taking us to the extra care while painting a thing!
DIY home paint setup: USD15.000
Painting tips from Ron Jeremy: priceless.
TJ good to see you and hear you God bless you
Unfortunate considering you're a scam artist
🤣🤣🤣..... Best, most professional, stupid-proof way to paint! Well done and thank you for being so descriptive and straightforward.
Thank you for this video, I am wanting to attempt successfully to paint my fenders and tanks for my Harley. Your video and your straight forward and down to earth instructions are awesome. Thank you!
I DONT use degreaser or brake cleaner. I use water with alcohol mix (much cheaper) and then wax and grease remover made for pre paint. I always like to etch prime before primer even tho its dtm, or epoxy they say is best for full raw metal pieces. Nice vid tho I love to see diff ways people do things.
Thanks for sharing and for watching!
Fabulous video! I've done some painting that's turned out fairly decent, and can tell with a few changes (based on this video) I could take it to the next level. Thank you!
Thank-you for the explanation. I actually just purchased a spray gun for this very application.
Great,work like the way you handle the sprayer smooth and fast.
Thank you! Cheers Mate! 🍻
Very helpful with all the paint types and information. Thank you.
Absolutely! Thank you for the comment and watching!
I and other professional painters will actually use Rustoleum etching primer. Works great. Great for bare metal. For plastic us their Primer with sealer.
@@TJBRUTALCUSTOMS WTF?? Why did you get defensive??? I did not say your guy was wrong or criticizing him. I offered another alternative to viewers. And, so what about your 5 shops; means nothing. Your guys didn't make the covers of motorcycle mags (when they still published them before internet) and are award winning painters like guys I know. I just received my second bike of the month award from Suzuki ,within a years time, for my vintage bike builds.
I am really disappointed in your response. I am a long time follower and I recently started my own bike builds doing bobbers, using Shadows for the most part. You were an inspiration to me and I was going to order parts from you. Good job buzzkill. Hello other vendors. Geez.
Yep, we use it all the time at my paint shop. Been doing so for years. Better than the high end brands.
@j scott Agreed. TJ ought to smooth that over. The guy was just trying to help.
@@TJBRUTALCUSTOMS Come on dude. Really??
@@TJBRUTALCUSTOMS lots of ways to skin a cat brother thanks for the content
It’s a courageous step to take on your own paint job. But, even more courageous to go on UA-cam in those shirts 😊😊
Thanks for this video Mr Pablo escobar
Very informational, informal & well executed, thank you Mr Jeremy.
The lvl of attention to detail here is seriously appreciated though. Salute 🤚
Thanks man!
Great video! I'm going to end up using Blitz Black, ha, but really good to know all the steps to make it perfect.
Dude Ron Jeremy is teaching paint now? Right on Ron..
"How To Paint Motorcycle Parts At Home - Like A PRO!" and then goes into a paint booth!
I know right 😂
Great video!
If you want to add a decal, where in this process should you do this ?
iirc you can put them over the clear coat, or before. allowing the paint to gas out and cure first is key.
Watched the whole thing, great info. Thanks for taking the time to demonstrate the correct way to do this. Background music is a bit annoying though. Thanks again.
Good to see you Ron how you’ve been
When did Ron Jeremy start painting bikes?
Great video. 🤙🏼
What type of paint do you recommend that’s fuel resistant?
Thank you for the amazing video. Can you please mention the time required between every step.
W-O-W that came out so nice Matt! You would be a great Vocational Teacher in your spare time! :)
I live above my garage and will plastic off the garage to try and control for dust. I plan to paint with the door open and then close late at night. The only fumes that should linger should be while waiting to cure. Thoughts?
Great video!!! What about repainting plastic and metal parts of the bike? How deep they need to be scrubbed?
I'm not sure, I don't really ever mess with plastic lol I usually throw it away 🤣
All you need to do is gently rough the surface with a scotchbrite pad
Good video but the music is not it. this is music you'd use on some confused scene or like somy mystery/puzzle solving scene
Great tutorial!
I've worked in Paint and Body in the past, but we can always learn more.
✌️
Beautiful color by the way! Looks like black chrome...
@@TJBRUTALCUSTOMS
Well deserved Brother ✌️
Great info but do you sand in your paint Booth?
I do not understand the different coats. Are you using the same cans? are you mixing them with other colours? If so what is the ratio?
Reach out to Anaheim rod and custom and ask them! Here's the link to their UA-cam channel! - youtube.com/@rodcustom6338?si=wO9a3_Wc_8KIZxTL
How and when would you apply say a Harley logo on that? Before the clear coat?
you can do before or after, ive seen both.
Easiest way to paint stripes?
THANK YOU FOR EXPLAINING SOME WORDS, i wouldn't have understood them with my vocabulary😭
Would this work for plastic fairings ? Never done anything like this and I'm so unsure what method to use
im not sure man, never painted plastic before.
Bro nice video! I see you in Netflix El patron del mal and now on UA-cam! 😅
Hahaha!!!!
Any rattle can clear coat brand recommendations?
We don't offer any recommendations. Sorry!
"Tj here, and today I've brought our special guest ron jeremy"
The Ron Jeremy, Weird Al paint job
Thanks for the video. If I do any plastic parts that flex do I need a different paint than I would use on the tank or is there an additive that I should use? I want the bags and your pack to match the fenders and tank.
You got a like and subscribe right off the bat due solely to the shirts :)
fuck yeah! thank you so much dude!
wouldn't Prep All clean the tank well enough rather than all the steps you show on cleaning the Sportster gas tank
👍
First impression was is that ron jeremy? lol
What if we start with a piece that is painted and clear coated already ?
When are you releasing velocity stacks for vt1100?
Came here thinking it was Pablo Escobar
That dudes looks like Ron Jeremy
Yeah. Where's Ginger Lynn?
Thank you Ron Jeremy
Hello, is it possible to degrease the product with dishwashing detergent before painting?
no.
Sir is that a aluminium tank?
Or what metal is it?
its steel!
Bruh I thought Matthew was Pablo Escobar 😂😂
you are not alone! LOL
So if i wanted to use an airbrush to paint som details. At what step should i do that. Is it after primer or after baselayer? You would probably have to do it at a more comfortable work area for this part. So moving it would probably be nescesarry. And preferably be able to Apple maskingtape as well.
Probably
@@TJBRUTALCUSTOMS WOW.. What a great answer. 😅
@@sleepyaage1
I noticed you didn't do any floating between coats.
Like fizzy lifting drinks?
How can I avoid orange peel so that I don’t have to push or polish?
Will you wet sand and buff the last clear coat ?
Yes.
What song is in the background? I love it
@@TJBRUTALCUSTOMS thank you!
Any tanks for Honda VTX 1800?
Can I use this type of sealer to paint on wood?
i dont see why not?
Do you put a clear over matte black?
if youre going to mix your own paint, you can spray a flat clear at the end of whatever color you painted.
Which gas tank do you make that will fit a 2006 Honda Shadow Aero Mr.TJ?
@@TJBRUTALCUSTOMS I feel like the VT750s are the red headed step child’s of Honda Shadows😂
@@chriscantu380 🤣🤣....soooo. true!!🤬.
@@TJBRUTALCUSTOMS just giving you a hard time brotha. I’ve literally bought all my parts from you besides the gas tank and exhaust which I’m just waiting to gather funds for. It’s a TJ build for sure! I appreciate the response.
¡Pablo Emilio Escobar Gaviria! Increíble el parecido.
dude its Ron Jeremy
he is alive and mixing tiki drinks at a luau near you!
Pablo Escobar lol
SShhhh!
Badass bikers!
dude looks like he doesnt wear a respirator when he lays paint 😅😂
is Ron
Is ron??
he should be a teacher!
This is awesome information and great presentation. Pleeeeaaase stop the music :) it's so distracting and horrible. If you must have it why not Hawaiian to match the shirts?
im sorry the music choice didn't agree with you, we will find something much worse next time. Thanks for the comment!
If I’m gona spend the money on a new not rusted tank I would not need to paint…!😂
I thought it was Ron too 😂
You never tell us where to get the paints
have you tried searching the interwebs my guy? LOL
14:31 - "...we'll shoot some pictures and video of it later so you guys can check it out..."
Keeps watching for promised pictures and video.
none
Disappointed...
Whoops sorry, we were too busy having fun with our finished product
That’s Pablo Escobar
shhhhhhh
the music is unsettling
Ron Jeremy??
Explanations lacking at best. Don’t title something HOW TO paint at HOME and then use a pro gun and a freaking paint booth for the video. Paint it like joe average would AT HOME.
@@Taco_Lover. Yeah his comments on UA-cam are brutal!!
Lies thsts Ron Jeremy
This ain't the video if you actually want to do this at home.
Video presentation or tutorial with background music, 😒 Totally useless 👎.
This reminds me of a timeless quote "if you dont have anything good to say, shut up" - Justice Beaver 🥰
Please note that many others have found great value in my efforts to share information and educate.
Please do complain some more on my other videos. i bet ya cant! ;) I will make the greatest educational videos you have ever seen with even more background music even harder now.💪🏽 Just for you. Thank you for commenting! Make sure to like and subscribe so you dont miss any more of my useless videos! 😃
l80ra
vum.fyi
At home like a pro, if you have all the equipment a pro does. What a fuckin joke!!!
Thanks for the comment! How else can we disappoint you today! 😀