How to Spray Paint Motorcycle Parts. Speed T Project
Вставка
- Опубліковано 28 сер 2024
- A Step by Step Guide to painting bike parts. This custom spray paint job is a Candy Apple Red and gold over silver flakes.
Using this method makes it easy to mask up different lines and get clean shapes with spray paint.
Check out
www.customspray...
Song:
ONLAP - Whispers In My Head
Check out the artist's pages!
/ onlapmusik
/ onlap.official
/ onlapmusic
Song at the end:
Song: Phantom Sage - Hollow [NCS Release]
Music provided by NoCopyrightSounds.
Video Link: • Phantom Sage - Hollow ...
I want to paint my bike, but im scared.....like what if I mess it up and the bike explodes...
Bruh you paint the bike not dismantle the entire machine like bruh what's make you think it will explode It's just the outer layer body not the machine
@@skyblers4143 it was a joke lol
@@edinpandzic5838did you end up painting it?
@@anthonygarcia3922 I did not...
Lots of great information. I'm a motorcycle painter. I use a heat gun or a rubber wheel eraser for harder to remove the decals. It will leave the panel smooth so I don't need to spray any primmer surfaces. Saves a lots of time.
So on plastic pannels or clean paint like a new fender or tank that has the right base colour already would you just scuff and then paint away?
Thanks dude! I'm a DIY biker and always love spraying stuff and seeing clips of yours. I'm selling some paints and 2k clear coat rattle cans and I always recommend my customers to your channel for spraying techniques. And now you did a clip for motorcycles! Thanks and subscribed! Will recommend more of them to you! Thanks again!
Benny Huang I need paint. Are you in the states?
Damian Arden nope sorry. I'm in Singapore ;)
Benny Huang hlow what name of paint?
Benny Huang
Singapore ? Hilarious
This is no doubt your best quality video so far, It's great man, keep up the good work! and also, nice bike!
Nice Iron Man color scheme. If I had a sports bike I would have it painted white w/ some black and an orange fuel tank. That’ll make it look like a spaceship. Pair it with an all white track suit, white backpack and an all white full face helmet with a rose gold chrome visor, and you’re now an astronaut!
Absolutely one of the best how to- videos I have ever seen. I really appreciate those small tricks you showed to us and clear explanation about steps how to proceed! Greetings from Finland!
You probably dont give a shit but does any of you know of a method to log back into an Instagram account..?
I stupidly lost my account password. I love any tricks you can give me
@Emmitt Keaton Instablaster =)
This is cool, I'm so jealous of you people for having the space to do this. Unfortunately, I don't and the cost of renting a booth to do this makes it more expensive than just paying somebody to do the painting for me.
At the 8:00 mark, I was really liking that sweet Iron Man effect. Had it been my bike, that would have been the finishing point. NICE overall effect.
Looks great, can't wait to see the color changing paint.
I was going to tell you that you do great work...but I think you already know that ! awesome videos. THANX!✌✌!!
Looked like Ironman before the black.
Nice work
I'm really liking the way you edited this video! keep up the great work!
Mannnnn, That Was Sum Nice Dope Work Of Art, Gr8 Job
This video is exactly what I needed. Thank you so much.
That's a whole lot of work 😳
I like the new sprayed table
U made me really interested and inspired to do autobody and paint work
Girl ?
keep the good work up really good i like your video thx bud
This was awesome.
You sir are super talented
Oh wow that speed is gonna like sick as. I'd love paint like that on my street triple
looking forwards to the exhaust heat changing paint. should badass!
Wow. Fantastic video. Maximum effort and results that are worth it.
WOW nice job!
Making it look easy as usual. Cheers mate!
great patience and technique!! i learned alot from watching this, thank you.
bro u hav patience /// awesome works// know i knw somethings abt spray paint // ty loved d vid
Unreal work man, I gotta find the future video where the bike's finished
you have talent!
Great video! Confirms I'm on the right track painting my bike. Thanks for including the breakdown of your spray gun and paint setup.
How did painting your bike go?
@@therookie710 turned out great!.. Unfortunately, UA-cam won't let me post a picture here. 😝
So badass dude
Looks amazing!
Dude, you make this look sooo easy! ahah
Those colors makes me think of some cool wasp transformer.
I thought T⭕️NY $TARK$ was going to walk in and ask about his suit parts being painted , looks fantastic 🤔
Wow am i enjoying these videos. Many Thanks
I’m waiting to do just this. My budget for the air compressor is around £250. What options do I have? I don’t want an extremely loud air compressor.
This looks like a lot of fun. Is it absolutely necessary to have a specialized room?
No, you just need a good space with no dust... I've seen people rig up a box with a fan in the back and a filter over it, pointing the fan out of the window in your house to exhaust the fumes
holy crap! That looks amazing dude!
Really good video.
Wow. A work of art.
Nice work, but I have a question. you are meticulous about prepping the plastic for paint; roughing, priming, etc. but you apply the black directly to the other paint. Why does that work?
Really helpful! I wonder if we want to apply stickers/decals, do we need to apply sticker first, or the clear coat first?
that's sick love the work !!!!!!
Perfect movie! I've check and understood many issues of my my own practice ;-) Thanks! PS. Evade any skulls ;-)
Again an amazing video
also when spraying metal flake you should have noted that it is proper to take the little plastic filter out of the cup between the cup and bath if it has one.
If Hotrod was a bike instead of a car!! 👍🏽
Great job my Man. Nice. 🤙
Amazing work! Thanks for sharing
great video and amazing results like usually!
Beautiful job
Absolutely LOVE it!
Helped me a lot! Million thanks sir!
wow, ita nice combination of colours, thanks bro.
How much reducer do you typically use in your clear? My first time spraying clear was a nightmare because I couldn’t find any info about mixing reducer in the clear..found out the hard way
When painting over the silver base with the red, did you remove the masking tape right after painting, or did you wait an hour until removing? Concerned about the lines not being sharp.
Wow great work.
Great video. Thumbs up.
Very helpful video! One question... When the sanding between layers of painr or clear coat is needed?
Sorry for my bad English
Wow that black really made the pieces pop. Looking forward to seeing the assembled bike. Is the bike yours? I've switched from 3M to FBS Gold masking tape and bleed through are pretty much gone. Clear as a blocking color can really save your ass with candy colors. Thanks for the video.
Ralph Magnus did you get regular bleed through with 3m? I used the vinyl fine line last week and had fuzzy lines everywhere! I couldn't have pressed the edges any harder without damaging the first base colour
Yes not all the time but enough I was willing to try something different. FSB Gold was recommended to me I tried it and results are very good. Give it a try I bet you too will like it. The paint industry is always coming up with improvements so some experimentation is worth the effort. Love your channel keep rocking it!
Ralph Magnus cheers dude but you realise I'm not dave/custom spray mods? Lol
Blish no problem just answering the question. All good.
Amazing paint job.
Very nice. Quality content 👍🏻
Keep up this great work!
You should have sanded the black coat so the edges dont see but im in love with this paintjob anyway!!!
HyralProductions thanks man. I mentioned that I'll sand them again at the end of the video. Should look good on the bike.
Excllent work
Why put the black. Gold and red flaky is just awesome.
So you basically added flake ti the clear and used it as a base coat?
how long do i wait for the paint to dry enough to stick tape on it...am afraid the tape might peal the paint off upon removal
I see you sand down the clear coat in between steps. Does this work if your clearcoat has lots of dirt in it.which I have on the first layer of clear. Can I sand down the clear and only redo the clearcoat or do I need to start from primer again? Paint has cured about a week.
Wow!! This is incredible!! May I ask, how long have you been painting to get this good? And given your experience, how long did it take you to complete this job? What a phenominal video. Very inspiring.
GR8WHITEC5 hello. I have been painting for about 10 years now. Still learning new tricks. This took me about 2 to 3 full days. But I'm working on other things as well so it's a bit difficult.
Well you just make it look and sounds so easy, good job!
Advice on spraying matt plastic parts?
Good job 🙂👍
that flaking made me liked and subscribed this
I have a '76 cb750 gas tank I want to reproduce the original candy antares red with black on the sides. Do I spray the clear over the candy first then scuff and mask/spray the black like you did or is it ok to spray clear over it all afterwards?
I like the german flag design.
rapaz adorei esse vídeo, assisti até o final, mas você não mostrou as carenagens pintadas na moto.
onde está a moto com as carenagens montadas, não achei. mas tá muito linda a pintura, sou seu fã
how long do you wait inbetween pimer and base coat? or in between primer coats he may have covered this in a different video but i cant find it, thanks! great vid btw.
Paint another helmet. also you should do a video about masking. such as when to take it off and how to apply it without damaging fresh paint.
How about using gold base coat and gold flakes, what would the results be like? And would a normal 1k primer work on plastic instead of 2k epoxy?
Awesome job
What's the point in spraying clear then sanding before the black ?
nice bro great job
Great stuff!
Parabéns pelo excelente trabalho gostaria muito de aprender estas técnicas e praticar aqui no Brasil.
.
Looking great 👍🏼
Have you tried using a heat gun on the stickers so you don't have to deal with uneven sanding?
Does the paper attached the tape have to be a certain kind to prevent bleed through like wax paper or something? Thanks!
excellent work
Quick question Dave, on the high-build primer when youre done sanding it, do you go back over the pieces with wax and grease remover or just simply wipe them down with a clean rag?
Eion McCullough wax and grease remover and tack rag.
"I didn't click" haha (I like the click)
This useful thanks bro
Sometimes when I paint the plastic panels on 1 of my bikes (eg fenders, battery cover) I get a ripple/cracked earth sort of patches in a few spots.
Could this be the plastic? Or residue from wax & grease remover?
So are your base coats acrylic with 2k clear over the top? If so is there a danger of delamination? Thanks for sharing too. Good stuff
Scott Thomas the base coats are 1k but suitable for 2k clear.
Nice job, ready for some gypsy teenager. :D
hi i wanna try and paint my own motorcycle.do i have to use a special plastic primer for my fairings or the same primer that i use for the frame?(metal)it will be my first time spray painting
Awesome job sir. I would like to ask, what kind of tape did you use?
How long do u leave it before removing the masking tape,should it be left over night or would that then cause your lines to mess up?,great videos,love ur work
Lee Elliott just till the paint flashes .about 15 min
how do you clean up those rough seems after you peel the tape? does the clear just bridge the gap and make it look good?
Which grit do I need to use for sanding my old paint? And before applying the primer
awesome man