I purchased my Glock19X as soon as it hit the market. I’ve been very pleased with it. It’s my EDC, and have no problem concealing it with the Cherries holster. The 19X replaced my Gen2 G19 I carried for years. I might have to buy the MOS model and run it a red dot with a can. Thanks for all your videos on guns, gear and current events.
It hit the criteria they were asking for “Modular” Everybody that’s served knows damn well nobody is special. You get what you get. What’s more likely is whoever was in charge of the budget gets a kush job at SIG
You Glock homos are all the same. Small weewees? Sig is the better gun. Glocks are cheap and were jammomatics in the 90’s and 2000’s, and still to this day jam more with police than any other gun. Get over yourselves, homos.
I have a 19x OG. I had the slide milled fde trijicon rmr and stippled the grip put Johnny Glock timney trigger combo. She is definitely my favorite that and my matching g45
@@overtheradar yea I have the radian to. I love it. I put up a few shorts and you can see how flat it makes the gun compared to the g45 I have without it. I actually swap it back and forth between the two.
@@BloodAlwaysFindsItsLeveluh, not a whole lot, but I have larger hands so I “upgraded” from the 19X to my 45. The 19X has a slightly smaller form factor so it’s better for concealed carry, but the 45 is just as good, just a slightly larger print. The Glock 45 has all of the new Gen 5 upgrades, while the Glock 19X only has most of them. The 45 can also take Gen5 mags, which is huge since I range day a lot, and Gen5 mags have been a huge upgrade for me opposed to the previous models (quicker to load because I have a mag well adapter) Also the 45 is slightly lighter than the 19X, slightly by 0.35OZ ;) it’s just a preference, but if you have larger hands the 45 is much more comfortable and natural fitting in my honest opinion! Hope this helps, both are superb tools tho!
The most COMPLETE and comprehensive review ever on this pistol. Getting it next month Academy puts out good sales during veterans day/week. Thanks for great review!
I will say a few downsides as I have ~500 rounds through it: - Glock trigger blows, I replaced mine and it changed everything - Glock is still using the old and crappy to use slide release, mag release and take down slide release. Again, I replaced mine - the suppressor sights are not night sights. I prefer this because I put a Trijicon hd on mine and I dont want multiple reticles at night. All in all, before purchasing the suppressor and sight, you are talking $650 plus another $2-400 worth of after market products you will need to purchase which does suck because of the competitive options have better value equations… however, Glock is my go to and favorite gun so I am overall very happy with the gun.
Sweet, looks awesome. Would love to see an update to your “what I carry” video. Interested to see how your options have changed and what new opinions you might have about your carry rotation. Thats old video is really helped me with my EDC
I just built a supressor host of a PSA Dagger frame and then a threaded complete upper with RMR Co witness and a standard unthreaded upper. Added nice sightsfor the upper and trigger upgrade and a couple Glock OEM parts. I probably have $500 in total for a nice beater setup.
I ccw the 19x with flush fit mag. Love it. Full grip and the shorter barrel and slide makes target transitions quicker and draw as well. At least it feels that way. I just run the stock night sights. Gun is incredibly accurate and trigger is better than my other glocks.
The metric 13.5 left hand threads are superior, especially for pistol use. The 1/2x28 threads are actually not that well defined, so some dimensions are left up to each manufacturer to decide, which leads to incensistencies. And with left hand threads you tighten the suppressor on the gun, while trafitional right hand threads are unscrewing themselves since they go in the same direction as the rifling in the barrel. Thus, better definition spec and correct threading direction make M13.5 the superior thread for 9mm pistol use. 1/2x28 is inferior and only keeps on kicking because it's already popular, not because it's good.
interested in the threaded barrel etc, but after my own MOS experiences I can say I really don't like the MOS system, I ended up milling my slide to take the optic of choice directly...
I have the 19x and I use a rat tail file on the magazines that won't fit the 19x to make a groove for the lanyard loop to fit the magazine. Easy peasy and the mags work.
Absolutely love my original Glock 19X... it's still totally stock except a et of Handle it Grips. It's been my main side arm when in the outdoors, hunting, camping etc... I conceal carry it fairly regularly as well. I'd definitely trust my life to it. Really cool to see Glock update this pistol, but if only I could find one! Awesome video Mike! Hope you're doing good.
Would you be able to do an in depth comparison video of various “mid to high tier” AR-15s? I’m really interested in seeing if, and how, some of the more pricey brands compare to something more affordable, but honestly pretty reliable, such as BCM’s rifles. Preferably the following brands and all in 14.5” length: - Knights Armament (KAC) SR-15 Carbine Mod 2 - Daniel Defense M4A1 RIII - Noveske N4 Afghan w/CHF barrel
I have the original 19x and I still love it. I did get it milled for an optic, etc. which you won’t have to do with this. Although, I think I’d rather my slide milled for a specific optic rather than the plate system.
Thank you for the review. I am looking to buy another Glock and I have been looking primarily at the G34 and your comment about having reliability issues with the G34 has given me pause. I need to go look at your video about the G34. I already have a G19 Gen4 MOS with an aftermarket threaded barrel, so I really don't need another one. Again, thank you for the review. It was hugely informative in more ways than one.
I like the Gen 5 slide finish in general, but the 19x’s metallic finish has the added benefit that, if you get a chip in the surface, the white metal kind of blends in
Looks like a great handgun overall. I like my G47 with Holosun SCS just fine though. It's a tad bigger than the G19 but I'm 6'4" so it's not too hard to conceal.
@Frank-uw5xq it's a tad different in that it doesn't have "shake awake" but is instead just left turned on. The solar panels recharge the battery. Technically, the battery has a 20K hour lifespan if just left on but with the recharge capability, it idealy should last several times longer. The main thing that i like about the SCS is how low it sits in the slide. The green dot and factory height iron sights co-witness so no need to install taller iron sights or just outright block the iron sights and rely entirely on the optic. It's my first and only pistol optic but thus far, I like it. If there are any cons with it, they might be that the window is a tad small and the laser emitter isn't enclosed.
I just bought a G34, Gen 5, MOS, but I am super interested in the new G19x Gen 5 MOS. I really like that it comes with a threaded barrel. I like to use silencers on my pistols. Being able to get a Glock threaded barrel and not having to buy an after-market barrel is awesome. I really appreciate you telling us about the magazines and how Gen 5 mags won’t work in the G19x. I only have three Gen 5 mags, which came with the G34. If I buy more mags, I really need to look at getting the G19x 19 rd mags, which I presume will work in any standard Glock. Concerning MOS plates, my new G34 came with only the one RMR patterned plate. I bought a Vortex Defender XL optic, and it comes with the MOS plate for Glocks. What is really nice is the Vortex MOS plate is fitted so that there is no space between the front of the optic and the slide. I have not tried a Glock performance trigger, but all of the Glock triggers I have had I have changed out. My new favorite trigger is the Timney Alpha Competition trigger. It is a little light for a carry gun, but if you do what you are supposed to and “keep your finger off the trigger until you are ready to fire,” it shouldn’t be a problem. Thank you for reviewing the G19x. It was really informative.
@@MDpolo The G19X hands down. The reason is compatibility and versatility. Anything that will work with a G19 and G45 will work with the G19X. There is just more "stuff" that will work with the G19X. The G19X has greater versatility because of its size and because there is more "stuff" for it. FYI, I have had no reliability issues with the G34, but I can't leave well enough alone, especially with Glocks. I changed the sights, recoil spring assembly, trigger, controls, and barrel before I put my first round through it.
I'll be honest. In my case I liked the paint job better. Every Glock I had ever seen new or bought was Black up until the 19x and I just liked the color a lot more. 19 round mags are a plus but of course the G45 can take those too. What's even more shameful in my case is the G45 is and was cheaper than the 19x as well. Not many will admit that here but I guarantee that's why the 19x outsells it and why it's more expensive due to demand even though with the G45, like you said, you don't have to deal with the magazine issue and you get slide serrations up front. I am pretty sure internally they are the same so the G45 truly is the better pistol unless there is something I am missing.
I own both the G45 and 19X and I prefer the G45 because of the lanyard loop on the 19x BUT I like the color of the 19X .. so I cut off the lanyard loop on the X and now use my older G17 mags
@@Dynomind1 The pre-installed maritime cups and the iron night sights explain the appeal: it’s a gun that Glock actually tried to set up for out of the box duty use. Also sweet peanut butter goodness
PSA Sabre Dagger with threaded barrel, RMR cutout and +5 base plate extensions to the 17 rounder. They have a Glock version and a Magpul magazine version. Yes please
I still winter carry, and shoot the snot out of a gen 4 G17 Lipsey's FDE Glock that I bought in 2013, and a no palm extensions.. Early Run Gen 4 G19 FDE Frame with the old Tennifer gen3 slide coating.. They are two super odd guns.. I really gotta get a 19x as the odd brother..
If u own a 19 already go buy a 47 like I did and make any combo u like. Threaded barrel and suppressor sights aren't worth the extra coin, unless you're in love with the finish
Only thing I am not a fan of is that the thread protector is larger than the diameter of the barrel. Makes an extra step to dissassemble the firearm, which is the exact process when most people would be likely to damage those threads. For example the Beretta M9A3 and M9A4 use a thread protector that is the same diameter as the barrel so you dont have to take it off to dissassemble. I'm sure there are other examples that also use this method. Is it a small issue? Yes, but for the price of the thing, its definitely something they could have sorted out.
Love my 19x. Except i have the version without optic cuts on the slide. Of course not long after i got an aftermarket slide this comes out. Dammit!!! Lol
So, in order to answer your question: is it the best Glock ever in your opinion ? What are all the differences in detail between the Glock 45 MOS and the Glock 19X MOS ? Would love an in-depth "versus" video between these two Glock models !
I am more partial to my Gen IV Glock 20 milled for a Holosun 509T, but 10mm is just my boo. As 9mms go, the Glock 19, 19X, and 45 are all on the short list of elite tier 9mm pistols.
I like the p365 series of pistols and variety’s ..but the sig p320 I’ll never understand how that gun won over the 19x ..I hate p320 owned a few and had nothing but trouble out of all of em ..traded em off …I’ve never had to send a Glock back …it all came down to cost for that army contract ..
Im 34 been shooting since 10, owned a gun Charter Arms AR-7 since 16, at 18 purchased my first rifle bushmaster acr which lived in my vehicle just like my friends in high-school so we could go shooting or hunting at lunch occasionally and legally, got my first pistol at 21 a Taurus pt-809? Because I'm 6ft3 and it looked like a midsize pistol and concealed fine on my slimness in fitted clothes, ive owned a couple to a few hundred guns yet i have never owned any Glock. 😅 Ive known the history of glock since at least middle school because i loved firearms and and knowing as much as i could learn. Just never makes sense to me to spend that kind of money on a gun that quite literally was designed to be the cheapest rapidly producable pistol possible. It just feels like owning a $1,000 HI-Point 🤣 ive never owned one of those either but for different reasons. If a Glock was half the price i would probably purchase it based on its reliability, but if im willing to spend whatever then im going to pick so many other pistols or even revolvers over it.
Fought the plastic gun phase until the 80s. Now I’ve been using them since the 1990. They’re more than acceptable for a tool. Don’t fix what isn’t broken.
C&H Precision plates with the t inserts work better than the glock RMR plate. If you actually want to co-witness lower 1/3rd you have to get a Trigicon RMR.
Mike I know you have that streamlight hl-6 review/comparison coming right? I gave my old man my hl-5 and can't make a decision on which to order until you give me the ok👌🏻😂
Be sure and visit Mrgunsngear.com for all the latest 🇺🇸
I purchased my Glock19X as soon as it hit the market. I’ve been very pleased with it. It’s my EDC, and have no problem concealing it with the Cherries holster. The 19X replaced my Gen2 G19 I carried for years. I might have to buy the MOS model and run it a red dot with a can. Thanks for all your videos on guns, gear and current events.
Hey Mike, I'd love to hear your take on shadow systems and if you would ever review them! Love your videos
I have 2 19X MOS’s and the G45. Just love the 19x more!
How different sir ?
Nice pistol, everyone get out and vote!
Go Kamala!
MAGA 🇺🇲
It's already been done for everyone. She will be in the office.
@@arlissyoung8899shut up lazy
TRUMP 2024 FKH
I got the Glock 19x with night sights and has been my go to gun.
Sig gave some crazy top to get that contract…no way is it better than the 19x or the 45
😂😂😂😂😂 oh fo sho
It hit the criteria they were asking for
“Modular”
Everybody that’s served knows damn well nobody is special. You get what you get. What’s more likely is whoever was in charge of the budget gets a kush job at SIG
💯
Cope
You Glock homos are all the same. Small weewees?
Sig is the better gun. Glocks are cheap and were jammomatics in the 90’s and 2000’s, and still to this day jam more with police than any other gun.
Get over yourselves, homos.
I have a 19x OG. I had the slide milled fde trijicon rmr and stippled the grip put Johnny Glock timney trigger combo. She is definitely my favorite that and my matching g45
🤤
I also had the slide on my 19x original milled for the FDE SRO plus added the Radian Afterburnner + Ramjet for muzzle compensation.
@@overtheradar yea I have the radian to. I love it. I put up a few shorts and you can see how flat it makes the gun compared to the g45 I have without it. I actually swap it back and forth between the two.
*parts of the inside of the slide do have the finish, parts don't" - to clarify...
The best Glock ever imo is the Glock 45 MOS threaded barrel, it’s what I have. Loved every round
What's the advantage over the 19x?
@@BloodAlwaysFindsItsLevelfront slide serrations and can take gen 5 mags thats about it
@@BloodAlwaysFindsItsLevel19X won't accept gen5 mags as stated above.⬆️
Can’t take 19 mags.
@@BloodAlwaysFindsItsLeveluh, not a whole lot, but I have larger hands so I “upgraded” from the 19X to my 45.
The 19X has a slightly smaller form factor so it’s better for concealed carry, but the 45 is just as good, just a slightly larger print.
The Glock 45 has all of the new Gen 5 upgrades, while the Glock 19X only has most of them. The 45 can also take Gen5 mags, which is huge since I range day a lot, and Gen5 mags have been a huge upgrade for me opposed to the previous models (quicker to load because I have a mag well adapter)
Also the 45 is slightly lighter than the 19X, slightly by 0.35OZ ;) it’s just a preference, but if you have larger hands the 45 is much more comfortable and natural fitting in my honest opinion!
Hope this helps, both are superb tools tho!
Hope everyone is ok out East
I was hoping he'd put out an update on this.
Thanks for this rather positive review on the 19x. I got the original and like it even though im not a Glock guy.
Saludos from Puerto Rico 🇵🇷 🇺🇸
The most COMPLETE and comprehensive review ever on this pistol. Getting it next month Academy puts out good sales during veterans day/week. Thanks for great review!
Took a bit but people finally realize there is something really special about this pistol. It is definitely the peanut butter.
Thank you for the review, I have the same one but without the MOS, I love it.
Works very well with a suppressor, I have the 13x1LHT on my barrel
I will say a few downsides as I have ~500 rounds through it:
- Glock trigger blows, I replaced mine and it changed everything
- Glock is still using the old and crappy to use slide release, mag release and take down slide release. Again, I replaced mine
- the suppressor sights are not night sights. I prefer this because I put a Trijicon hd on mine and I dont want multiple reticles at night.
All in all, before purchasing the suppressor and sight, you are talking $650 plus another $2-400 worth of after market products you will need to purchase which does suck because of the competitive options have better value equations… however, Glock is my go to and favorite gun so I am overall very happy with the gun.
Precisely
Sweet, looks awesome. Would love to see an update to your “what I carry” video. Interested to see how your options have changed and what new opinions you might have about your carry rotation. Thats old video is really helped me with my EDC
I have one of these, just picked it up at a gun show. I absolutely love it.
I just built a supressor host of a PSA Dagger frame and then a threaded complete upper with RMR Co witness and a standard unthreaded upper. Added nice sightsfor the upper and trigger upgrade and a couple Glock OEM parts. I probably have $500 in total for a nice beater setup.
19x at home for me
My biggest gripe about Glock is the sights!!!! NIGHT SIGHTS Glock!!!! I love my 19X! Thank you!
Funny every dumbass comment here has multiple likes except mine….what country are we living in!??????????????
That's amazing surpassed reliability you got out that Glock, usually Glocks hate being suppressed
4:40 - WHAT!!!! I don't know about pistol, but for a rifle that'd be awesome. Also, probably needs it's own video!
I ccw the 19x with flush fit mag. Love it. Full grip and the shorter barrel and slide makes target transitions quicker and draw as well.
At least it feels that way. I just run the stock night sights. Gun is incredibly accurate and trigger is better than my other glocks.
The metric 13.5 left hand threads are superior, especially for pistol use.
The 1/2x28 threads are actually not that well defined, so some dimensions are left up to each manufacturer to decide, which leads to incensistencies. And with left hand threads you tighten the suppressor on the gun, while trafitional right hand threads are unscrewing themselves since they go in the same direction as the rifling in the barrel.
Thus, better definition spec and correct threading direction make M13.5 the superior thread for 9mm pistol use. 1/2x28 is inferior and only keeps on kicking because it's already popular, not because it's good.
Indeed
interested in the threaded barrel etc, but after my own MOS experiences I can say I really don't like the MOS system, I ended up milling my slide to take the optic of choice directly...
I have the 19x and I use a rat tail file on the magazines that won't fit the 19x to make a groove for the lanyard loop to fit the magazine. Easy peasy and the mags work.
Absolutely love my original Glock 19X... it's still totally stock except a et of Handle it Grips. It's been my main side arm when in the outdoors, hunting, camping etc... I conceal carry it fairly regularly as well. I'd definitely trust my life to it. Really cool to see Glock update this pistol, but if only I could find one!
Awesome video Mike! Hope you're doing good.
Would you be able to do an in depth comparison video of various “mid to high tier” AR-15s?
I’m really interested in seeing if, and how, some of the more pricey brands compare to something more affordable, but honestly pretty reliable, such as BCM’s rifles.
Preferably the following brands and all in 14.5” length:
- Knights Armament (KAC) SR-15 Carbine Mod 2
- Daniel Defense M4A1 RIII
- Noveske N4 Afghan w/CHF barrel
Got about 800 rounds through mine and so far zero malfunctions. Love it so far.
I had a stove pipe failure with my first mag run, no issues since, I’m at a little over 700 rounds.
I have the original 19x and I still love it. I did get it milled for an optic, etc. which you won’t have to do with this.
Although, I think I’d rather my slide milled for a specific optic rather than the plate system.
Of course when I trade in my Glock 19x for Glock 45. Now they come out with MOS
Thank you for the review. I am looking to buy another Glock and I have been looking primarily at the G34 and your comment about having reliability issues with the G34 has given me pause. I need to go look at your video about the G34. I already have a G19 Gen4 MOS with an aftermarket threaded barrel, so I really don't need another one. Again, thank you for the review. It was hugely informative in more ways than one.
You're welcome 👍🏽
Yeah man, I’m all up
On The Glock. Just sent in Gen 5 G23 to get an Acro Cut. I use EPS Carry and RMR on all other Glocks.
My 19x’s rear sight totally self-drifted
Same
I like the Gen 5 slide finish in general, but the 19x’s metallic finish has the added benefit that, if you get a chip in the surface, the white metal kind of blends in
Incredible review! I just picked one up.
I love my 19x mos , it’s my 1st Glock. I have M&Ps
Yeah, I bought one. I love it. Because of this Glock I turned around completely on Glock.
always great content brother.
Looks like a great handgun overall. I like my G47 with Holosun SCS just fine though. It's a tad bigger than the G19 but I'm 6'4" so it's not too hard to conceal.
How you liking the SCS so far?
@Frank-uw5xq it's a tad different in that it doesn't have "shake awake" but is instead just left turned on. The solar panels recharge the battery. Technically, the battery has a 20K hour lifespan if just left on but with the recharge capability, it idealy should last several times longer. The main thing that i like about the SCS is how low it sits in the slide. The green dot and factory height iron sights co-witness so no need to install taller iron sights or just outright block the iron sights and rely entirely on the optic. It's my first and only pistol optic but thus far, I like it. If there are any cons with it, they might be that the window is a tad small and the laser emitter isn't enclosed.
@@1977Yakko I have one, I still need to install it tho... so thanks
Got one of these few months back. Put a Holosun 509t and Griffin Armament Micro Comp on it. Shoots lights out.
I just bought a G34, Gen 5, MOS, but I am super interested in the new G19x Gen 5 MOS. I really like that it comes with a threaded barrel. I like to use silencers on my pistols. Being able to get a Glock threaded barrel and not having to buy an after-market barrel is awesome.
I really appreciate you telling us about the magazines and how Gen 5 mags won’t work in the G19x. I only have three Gen 5 mags, which came with the G34. If I buy more mags, I really need to look at getting the G19x 19 rd mags, which I presume will work in any standard Glock.
Concerning MOS plates, my new G34 came with only the one RMR patterned plate. I bought a Vortex Defender XL optic, and it comes with the MOS plate for Glocks. What is really nice is the Vortex MOS plate is fitted so that there is no space between the front of the optic and the slide.
I have not tried a Glock performance trigger, but all of the Glock triggers I have had I have changed out. My new favorite trigger is the Timney Alpha Competition trigger. It is a little light for a carry gun, but if you do what you are supposed to and “keep your finger off the trigger until you are ready to fire,” it shouldn’t be a problem.
Thank you for reviewing the G19x. It was really informative.
@armeddiver if you could only keep one, which one would you keep? The 34 MOS or the 19X MOS and why? Thank you!
@@MDpolo The G19X hands down. The reason is compatibility and versatility. Anything that will work with a G19 and G45 will work with the G19X. There is just more "stuff" that will work with the G19X.
The G19X has greater versatility because of its size and because there is more "stuff" for it.
FYI, I have had no reliability issues with the G34, but I can't leave well enough alone, especially with Glocks. I changed the sights, recoil spring assembly, trigger, controls, and barrel before I put my first round through it.
Honest question, why not just get a G45? You avoid the annoying lanyard loop and the weird magwell cutout.
Yeah, I agree. G45 tops the G19X in my opinion.
19x has the maritime cup in the striker spring
I'll be honest. In my case I liked the paint job better. Every Glock I had ever seen new or bought was Black up until the 19x and I just liked the color a lot more. 19 round mags are a plus but of course the G45 can take those too. What's even more shameful in my case is the G45 is and was cheaper than the 19x as well. Not many will admit that here but I guarantee that's why the 19x outsells it and why it's more expensive due to demand even though with the G45, like you said, you don't have to deal with the magazine issue and you get slide serrations up front. I am pretty sure internally they are the same so the G45 truly is the better pistol unless there is something I am missing.
I own both the G45 and 19X and I prefer the G45 because of the lanyard loop on the 19x BUT I like the color of the 19X .. so I cut off the lanyard loop on the X and now use my older G17 mags
@@Dynomind1 The pre-installed maritime cups and the iron night sights explain the appeal: it’s a gun that Glock actually tried to set up for out of the box duty use.
Also sweet peanut butter goodness
@1:56 Thats a great video idea! Id LOVE to (own) see all the guns that were submitted for the military contract trials!
Good review, brother
Thank you!
1:24 Wow! I’ve never seen a Glock with an external safety before!
The MOS system adds versatility, and the threaded barrel opens up options for suppressors.
Finally after 20 years of being behind.
LE G45 with the direct RMR mount. My best Glock
Just picked mine up…still need to take it to the range
Yes it is! I love it!
Enjoyed the video re: the trigger the Glock performance trigger is a relatively inexpensive upgrade.
That backdrop is dope.👌
Daily Deals just started popping up in my email even though I’ve been signed up for years ! Good deals 👍
Sig proved that Big Army gives no shits about its men.
Price is what matters right?
Nice video! Appreciated ! Thanks!
PSA Sabre Dagger with threaded barrel, RMR cutout and +5 base plate extensions to the 17 rounder. They have a Glock version and a Magpul magazine version. Yes please
GLock says....WTF is a malfunction ? Good review.
Daily deals email has cost me a lot of money, lol. Including on this 19x MOS
Cool, hopefully they with make the 49 with the comp features. The 47 was really cool too
@MrGunsnGear ..Daily Deals - you cost me MONEY!! LOL Always great deals.. have bought quite a few things off your list.. Also.. Great content!
The HK factory in the U.S. I am hoping they will be threaded.
I still winter carry, and shoot the snot out of a gen 4 G17 Lipsey's FDE Glock that I bought in 2013, and a no palm extensions.. Early Run Gen 4 G19 FDE Frame with the old Tennifer gen3 slide coating.. They are two super odd guns.. I really gotta get a 19x as the odd brother..
Thank you Sir
Thanks
If u own a 19 already go buy a 47 like I did and make any combo u like. Threaded barrel and suppressor sights aren't worth the extra coin, unless you're in love with the finish
Thanks for the review. I think I found my next pistol.
Just get the G45 MOS, you can thank me later.
Only thing I am not a fan of is that the thread protector is larger than the diameter of the barrel. Makes an extra step to dissassemble the firearm, which is the exact process when most people would be likely to damage those threads. For example the Beretta M9A3 and M9A4 use a thread protector that is the same diameter as the barrel so you dont have to take it off to dissassemble. I'm sure there are other examples that also use this method. Is it a small issue? Yes, but for the price of the thing, its definitely something they could have sorted out.
The Kagwerks slide release is a must imo!
Glock + Radian comp = best Glock ever
😁
Love my 19x. Except i have the version without optic cuts on the slide. Of course not long after i got an aftermarket slide this comes out. Dammit!!! Lol
I am not really sure why they do not just make the G45 MOS in coyote. Same pistol basically except with the ability to accept gen 5 mags.
Have a standard 19X and love it but definitely wanting a MOS 19X but probably be months to get one ?
Glock "perfection, until more perfect"
Every 19 is the best glock ever.
I would buy one, but I don’t think they have the breach face notch like the other Gen 5s have for great ejection.
Thats a nice background you got there sir.
Thank you
So, in order to answer your question: is it the best Glock ever in your opinion ?
What are all the differences in detail between the Glock 45 MOS and the Glock 19X MOS ?
Would love an in-depth "versus" video between these two Glock models !
Duly noted
Anyone know if the Trijicon RCR will mount to this with the rmr plate?
Hrmmmm BOS lock looks like it had potential 🤔
I am more partial to my Gen IV Glock 20 milled for a Holosun 509T, but 10mm is just my boo.
As 9mms go, the Glock 19, 19X, and 45 are all on the short list of elite tier 9mm pistols.
🇺🇸
I wish Glock would make a 357Sig like this.
Ditto
I like the p365 series of pistols and variety’s ..but the sig p320 I’ll never understand how that gun won over the 19x ..I hate p320 owned a few and had nothing but trouble out of all of em ..traded em off …I’ve never had to send a Glock back …it all came down to cost for that army contract ..
Thank you
Nice pistol & watch
Im 34 been shooting since 10, owned a gun Charter Arms AR-7 since 16, at 18 purchased my first rifle bushmaster acr which lived in my vehicle just like my friends in high-school so we could go shooting or hunting at lunch occasionally and legally, got my first pistol at 21 a Taurus pt-809? Because I'm 6ft3 and it looked like a midsize pistol and concealed fine on my slimness in fitted clothes, ive owned a couple to a few hundred guns yet i have never owned any Glock. 😅
Ive known the history of glock since at least middle school because i loved firearms and and knowing as much as i could learn. Just never makes sense to me to spend that kind of money on a gun that quite literally was designed to be the cheapest rapidly producable pistol possible. It just feels like owning a $1,000 HI-Point 🤣 ive never owned one of those either but for different reasons.
If a Glock was half the price i would probably purchase it based on its reliability, but if im willing to spend whatever then im going to pick so many other pistols or even revolvers over it.
“Meet the new Glock… same as the old Glock”
-The Who, 1971
😂
I want this exact gun but with a 19 size grip. A peanut butter gen5 19 threaded Mos
What front sight are you running?
Fought the plastic gun phase until the 80s. Now I’ve been using them since the 1990. They’re more than acceptable for a tool. Don’t fix what isn’t broken.
C&H Precision plates with the t inserts work better than the glock RMR plate. If you actually want to co-witness lower 1/3rd you have to get a Trigicon RMR.
Thank you
Grabbed mine from Sportsman’s Warehouse for $683, which is a pretty good deal.
Nice! I paid 750 for mine 😅
nice
So what is the dif between this one and a G45?
The 19x: The apology model.
Crazy how someone dying (rhymes with Smaston Block) leads to new models coming out.
Indeed
The meme of the guy wearing a red striped shirt receiving another red striped shirt, as a present, comes to mind
😁
Is factory option or dealer customs?
Mike I know you have that streamlight hl-6 review/comparison coming right? I gave my old man my hl-5 and can't make a decision on which to order until you give me the ok👌🏻😂
I own a g45 and I love it but still carry a sig. Man I fell out on the mullet gun comment. 😂😂👍
They need to get rid of the tab at the bottom of the grip so it accepts Gen5 mags, and then it would be perfect.
Wish they made a 10mm version…
Still surprised 19x doesn’t have front serrations but the 45 does.