JON BOAT BOW MOUNT TROLLING MOTOR BRACKET MINN KOTA EDGE
Вставка
- Опубліковано 18 жов 2024
- Used a 12v minn kota Endura Max transom trolling motor 40lb thrust , removed the transom bracket, and converted over to bow mount using Minn Kota Edge bow mount bracket. Made the bow mount base out of 3” x 1/8” thick x 20” long aluminum angle. Painted olive green to match. As a bonus I used the transom motor mount as a shallow water anchor mount 👍🏻
Looks nice, but I see it hangs off the side little. can you adjust that so it does not hit docks or other structures in the water?
It swivels on the mount just like every other bow mount motor 👍
Nice video, where did you purchase the shallow water anchor poles?
Thanks, purchased through Amazon and Ebay. Yak Attack anchor pole
@@subcoolboats75 thanks!
Which shaft size is that trolling motor and how do you feel with that length?
45” length, it gets the job done either if Im fishing standing or sitting on a cooler on the bow deck. Thanks for commenting 👍
@@subcoolboats75 , Nice to hear that. I just ordered a 42inches one, with the tiller that moves up and down, so it might help. I got to try. Thanks for the feedback 👌
@tamarok my bow sits high in the water too, you should be good 👍
Where did you find the edge bracket? I have a transom mount trolling motor I want to convert to bow mount
I used a couple of 3” aluminum angle and cut to length to fit the bow mount bracket.
I bought the edge bow mount on Amazon but I don’t see it there now. Here’s the info
2771646 MINN KOTA EDGE TROLLING MOTOR COMPLETE BOW MOUNT #2771646 or #2771716
@@subcoolboats75 thanks so much, this is exactly what I've been looking for. All my searches kept showing the quick detach bracket to take the whole motor off the boat
@@307mtb glad it helped. It works good!
🤔🤔🤔...
For "Best" Results and true responsiveness...
Shouldn't the trolling motor be "clocked" to the "centerline" of the bow...???
Just what I heard... but don't know to be true.
Good build tho...!!!
👍🏾👍🏾👍🏾🫡🫡🫡
Probably but this trolling motor would be too short at the centerline, Thanks for commenting!
🤔🤔🤔...
For "Best" Results and true responsiveness...
Shouldn't the trolling motor be "clocked" to the "centerline" of the bow...???
Just what I heard... but don't know to be true.
Good build tho...!!!
👍🏾👍🏾👍🏾🫡🫡🫡
Thanks for watching