Це відео не доступне.
Перепрошуємо.
Chinese ATV - Complete Rebuild Bumblebee Edition!
Вставка
- Опубліковано 9 бер 2019
- On this episode of Praska Boy's Garage I rebuild a Chinese ATV for my 5 year old son. It was his idea to go with a "Bumblebee Transformers" theme which required me to take this ATV completely apart! This rebuild has everything from welding the frame to a complete top end motor rebuild! Thank you for watching, your positive support is greatly appreciated!
Price Details:
$125.99 - Wheels & Tires - amzn.to/3sasH1Q
$75.00 - Atvs purchase price
$33.87 - Gas Tank & Cap - amzn.to/3p0Oas4
$29.44 - Tie Rods - amzn.to/321kdiU
$28.55 - 2 Coil Wiring Harness - amzn.to/2XZdQIx
6 Coil Wiring Harness - amzn.to/33XegiK
$27.39 - POR15 Paint - amzn.to/3yM8u41
$21.83 - Cylinder Rebuild Kit - eBay# 123365744855
$21.09 - Rear Brake Cylinder/Caliper - amzn.to/3oZxu4q
$15.70 - Seat - amzn.to/3dW8tka
$13.66 - Fender Vents - amzn.to/3EfvRnH
$13.25 - Handle Bars - amzn.to/3mblWce
$12.90 - Chain Cover Plate -amzn.to/3q1C6pY
$11.90 - Front Brake Cables - amzn.to/3q2G7dH
$10.76 - Chain - amzn.to/3GPlXKT
$10.57 - Throttle - amzn.to/3E6Shaq
$10.28 - Fly Grips - eBay# 192164561509
$9.95 - Fox Handlebar Pad - amzn.to/3F7aTsm
$8.55 - Air Filter - amzn.to/33Bq3Ip
$7.50 - Valves rebuild kit - amzn.to/3ywbktA
$6.07 - Carburetor - amzn.to/33Bq3Ip
$5.98 - Chain Adjusters - amzn.to/3dWniU3
$5.29 - Wheel Hub Covers - eBay# 263797251995
$3.99 - Tint - amzn.to/3F4X91c
$3.92 - Brake Light - amzn.to/3GOM4BU
$2.18 Stem Valve Caps - amzn.to/325H7FE
$515.61 - Total Investment
Typically these chinese Atvs will sell new for around $850 shipped to your house and you can find them for $450-$500 used on Facebook marketplace or Craigslist all day. I completely blew my budget out of the water but at the end of the day its now practically new and exactly what my son wanted. Thanks for watching and I'll see you on the next one!
Copyright Free Music used:
JPB - High [NCS Release] • JPB - High | Trap | NC...
Bay Breeze by FortyThr33 / fortythr33-43
Wake Up by MBB / mbbofficial
Living by PIKASONIC / pika5onic
It's the best feeling making something work again that other people have given up on. You did a great job yet again.
Jason Mercer Thank you!
I know this is an older video but I literally just picked up one of these for free off the side of the road. Pretty sure it's the same model. I'll be doing a similar build. My son will love riding it when he's old enough. Thanks for sharing the knowledge!
You bet! Thanks for watching and good luck with your project!
Awesome results.....well worth the effort to see the kids joy! 👍
Absolutely, thanks for watching!
I love how you have your kids involved in your Videos ... When my son was 4 years old I gave him a screw driver and had him remove the Parking Light from my old S-10 pickup truck that needed replacing....That's all it took....he is 22 now and a Complete Gear Head... Mostly rebuilding/modifying his and friend's older BMWs (E30s) Liked/Subscribed
The best part for you is that you and your Family will have these Videos to re-watch for the rest of your lives ! Fantastic !
Screww Googlle Thank you for all your positive comments! I can’t wait to post my next video because there is a moment my gopro captured my oldest son uncontrollably giggling while riding and I’ve probably watched it over 1,000 times already! I’ll be posting at the end of the week!
The ones people are selling used for half of original new cost, are thrashed, things are broken, missing, etc. This little quad looks outstanding! You have the fun, learning, and sweat equity you can’t get from just buying another one and riding it (when it doesn’t run/work all that great anyway).
Mike Spain Absolutely! Glad you like the ATV, my son has been enjoying it all summer!
After 30 years of building, tracing wire harness never grows old. Lol. Great job great build great dad skills
Hey Shaun, I got your other comment also. Not sure if UA-cam took it down or you did, so I don't know if your a fan of the channel or not but either way thanks for taking the time to watch.
He will remember this for the rest of his life I still remember mine when I was 5 years old Christmas morning can't forget it
Still rides it to this day! He outgrown it now and my 4 year old will take it over next!
Great job. I just got a 90cc baja atv fixed up running again with the help of all these videos.
Great to hear! Glad the videos helped!
I bought the same quad but 110cc for my little girl and we have since got it running but the harness has been hacked up bad but watching you is what we needed and I thank you for that .
Awesome! Glad I could help!
I have a 50cc thats been hanging in my garage for 4yrs and your videos make me wanna jump back and it and fix it. Thanks for all the great content and some deep dive explanations instead of timelapses would be awesome too! But its cool man, Keep it up.
Thanks Bruno! Glad to hear you have enjoyed the content!
me and my nephew really enjoy watching these.. I'm actually in the process of building up my 400cc atv but it's nothing serious.. just air filter/spark plug/new battery just small stuff.. but yah can't wait to get mine running
That's awesome! Glad you guys like the videos and good luck on your atv!
GREAT VIDEOS, I have been trying for 2 years to fix my grandson's and granddaughter's 110cc 4 wheelers; then I found you.....I LOVE YOU MAN. I got his working and found out her's needs a starter which Prime will have it here in 2 days......THANKS
That's awesome! I appreciate your support and thank you for watching!!! Glad I was able to help :)
That's freaking awesome man. This spring I'm gonna try to fix up my daughters 110. She wants it pink and purple.
NoobOnAGrom Good luck man! They are a blast to work on! Let me know if you have any questions or need help. I’m created this channel to help the PowerSports community!
My daughters 110 is leaking oil really bad I have to find out where it's coming from
that cat just sitting there lol
Great video. I like your channel. I just got a xpro 125cc and I'm learning to ride. It's a good activity to pass on to the kids
sick birthday present ! nothing better then something custom from pops
He had fun riding it this summer, but after I finished the upgrades on the go kart I don't think it came out but a couple times!
In the process of doing one for my grandson. I got it for free and am sure this video will help. Already used wiring harness info off of another one of your videos. It's on a slow boat from China. lol
Love it!!! Glad I could help maybe make it a little easier on you. Good luck on your build!
Very nice job you do awesome work
Robin Fugate Thank you!!! 🙏
Great build !!!
Thanks!
Great job!! 👍👌Very knowledgeable!!
Thanks man I appreciate the support!
Just about to do the same and found your video really useful, thanks!!!
Phil Wormald Thank man! Good luck on your build!
His face was priceless! Looks Awesome!! Awesome Job Dad!
The boys reaction is what makes it worth it. Love your vids, Bro. You should post more of the Praska Boys shredding👍🏽
Thanks brother! The boys are my biggest fans, because when I'm done they get a new toy to ride! I might do a winterizing video and a walk threw off all the toys, which means the boys have to give everything one last ride!
You're a great dad!
Thank you!
Love watching these atv builds keep them up
Glad you like them! Thanks for watching!
Pennzoil is a waxy oil. Ran my pick up for 180.000 miles so it does work. But waxy.
Love it man I'm redoing one right now slowly at a time and you aced rebuiing yours
Thanks Todd! Appreciate that brother, good luck on your project!
Dude i don’t know how you don’t have 100,000 subs!
Ricky Gonzalez.O Thank you so much! Comments like yours help fuel me to keep making more videos! Maybe someday I’ll get that many subs!
when doing a compression test you need to have throttle wide open...the reason you didn't have to do it on the 110cc video is because you didn't have the carb on
Your 100% right, I was more focused on filming and I didn't even notice. I've had a few comments on it and I will make sure I'll do it right from now on.
I was thinking it was probably valves ......Usually what i check first is valve clearances
Yeah, that probably would have been a better idea before just ripping it apart! Either way I wanted to do a top end rebuild so I got ahead of myself.
I have two Apollo Motors Commander 125cc ATVs for our kids, and have had nothing but carburetor, and electriclal trouble of all sorts. The stators are just junk. including the replacements I got from E-bay. Finding a supplier of quality parts has been really problematic. Any leads on good vendors of parts for these ATV would be really helpful. Love these Videos. VEry encouraging and informative. I'm getting an education on how these ATVs work. Not planned though. Repair shops won't even take them. Having carburetor trouble with the Jinkie 22mm they came with. Can't seem to get them to run right either one.
Thanks! I'm happy you enjoy the builds! I've been thinking about doing some in-depth DIY repair video for these atvs! There is a lot of information on them but nothing real direct about wiring. You are %100 correct about the repair shops. Even if you find a shop that will work on them, a top end rebuild for one of these motors would cost more than replacing the entire quad! Check out VMC Chinese parts. They have some things on their eBay store but a lot more available from vmcchineseparts.com. I've been using them for years! At the end of the day these chinese parts are lower quality but I've never had a VMC part fail with in the first year of riding.
@@PraskaBoysGarage Thanks very kindly for your advice. Really enjoy your videos. Really well done. :) I get my sons running right Next project following the tractor's hydraulic is an ATV stand up of a used one for the wife and I. If I can find one cheep enough. ARe the Adult size China made ATVs worth it in the 200CC range? Polaris is way outside my price range. Even the used ones are steep.
Terry Spooner If your running them at your house or private property then the Chinese atvs are a great choice. If your going to be riding every weekend, taking it to camp grounds or off road parks I would save up for a used Honda. You can find good deals Honda recon 250s for around $1,500 dollars and they are great machines!
@@PraskaBoysGarage Hello. Thanks for your last video on electrical systems. :) Found the problem of my son's ATV 125cc. It was the stator. Lot of corrosion. The problem was the engine ran rough and would miss and then die. Would not stay running if It would start at all. I had replaced (upgraded) the ignitions system completely, as well as carburetor with Keihin 22mm. Didn't die as fast, but still would not stay running. Pilot jet was fine. Then out of desperation I pulled the flywheel cover and took a look at the corroded crank sensor, and 6 coil stator. Just seeing the rust I decided to change the stator with one of the junk stators that previously failed that I had repaired (bad solder on red/black lead). After the magneto replacement if fired up and runs well. Nothing to brag about either. That ATV was down for 2 months +. Sorry to say. These mags/stator assemblies have some either design or manufacturing problems. This is equivalent to the 4th on in 1 year. Not good. The flywheel or timing cover has two vents at the bottom. When ridden through water that can cause problems apparently. Wonder how that happened????? :) Not sure how to harden sensitive parts like this without also burning up stators/mags? Has to be a better way than this? Good news is that the kids are terrorizing the deer, coyote, jackrabbit populations or anything that catches their eye to chase down. :) LOL They just informed me they want rifle racks for their BB guns. :)
www.vmchineseparts.com
On a unknown origin motor before u crank it over u should drop a lil oil down the cylinder just in case it's a lil rusty and maybe hand rotate with 14mm behind stator cover plug . Just trying to help
greasemonkygaming greasemonkygaming You are absolutely correct! I typically use ATF down the spark plug hole, but more often when I’m working with 2 strokes or really old motors. I’m more of a “check the oil and send it” kinda guy. Your right, best practice would be to drop some oil and hand crank first.
Thank you for this and all of your videos.
You bet! Thanks for watching!
Your the coolest dad ever !!!!!!
Thanks man!
I see you have less than 5k subs. Your videos are very good and I love how long they are. It just takes time to grow. You probably aren’t but I don’t want you to get discouraged about UA-cam.
Thank you for the support! I started this channel a little over a year ago and I never thought it would grow this fast. I'm extremely happy with the growth so far and Im excited to see what 2020 brings! My goal is to post a lot more videos!
Great job as usual. Hope you have more videos to come.
Thanks, starting to get back in the shop and will hopefully have some more videos coming soon!
You must get hammered with questions,about repairs ,ect. That's how experienced you are,I myself love to tear it all down,and figure it out,I am not a professional,but like to learn,not a white collar, but an accomplished blue collar, mechanically,electrically, aka machine repair tech. Appreciate and respect all you do. Has hoo!
Talented guy 👍
Thank you!
This Is one COOL quad
Thanks! Still my sons favorite so far!
omg i was finding this videos cuz i have 110 cc and its in horrible shape and i have to renovate it, so this is niceeeee
Šváb Thank you for the support! Good luck on your project, and if you have any questions feel free to email me at praskaboysgarage@gmail.com
Thanks man thats nice from you
Отличная работа!
Put a little of transmission fluid into the spark plug whole then stick a rag into it and crank the motor thatll give u compression
The quad looks awesome man
Thanks! My son really enjoys it still to this day!
i would give away both my kidneys to have a dad like this XD
Man, thank you so much! Thank really nice of you to say!
Foreal man alot of people dont understand how important it is to have a dad there for you
hey there just finished up my grandkids quad and I want to thank you for all your help on it and I need to send you a picture of it completed look for it in a couple of days thanks
Good to hear it's almost done! I just went back and looked at your first email with the original photos and I excited to see how it turned out!
when doing a compression test make sure the throtte is wide open, or just remove the carb. Also check valve lash before tearing the top end off. Alot of times its just tight valves holding a valve open
Very good advise! Sometimes I just get so excited in a project I get ahead of myself and just want to get going.
lol I just bought that exact ATV as a "Coolster 3050C 110cc" so I was getting ticked off that it might actually be a 50cc. They make a large frame and small frame 110cc from what I saw on an old video.
Great videos! You have helped me so much you dont even know. Keep it up.
Awesome! Glad I can help!
You got yourself a nice little shop there I would love to have myself a better shop I work out of my garage which is 75 years old the floor is all cracked up it's half rotten and it's cold as hell in the winter and it's been known to flood in the spring. The problem is it's very swampy where I am and the old Foundation has sunk into the Earth over the years one of these days when I get a few bucks we are going to jack it up and put a new foundation under it and if I can get it half as good as yours I'll be happy. Been watching all your videos I really like the one with the orange bike where you gave it back to the family that was very nice of you. God bless stay safe and keep on wrenching.
Jason Mercer Thanks for all your positive comments, I’m glad you like the channel!
Love the vids!
How long do these builds take? I’m assuming a few months since I think you mentioned December in this video at some point in the beginning lol
fstrthnurmom Thanks!!! They typically only take me about 1-2 months with the free time I have! This one got delayed because I spent most my time clearing snow the last 2 months! Plus with all that snow the choice was shop work or ride the sleds ...we always choose ride! ;)
Thanks for the inspiration to start something fun with my boy now to find one of those but I’ve searched everywhere within 100 miles around me and nobody is selling any that are not brand new but anyways videos are awesome keep up the good work
charlie hill I appreciate that! Good luck on your search! I usually find them when I’m not looking and can never find one when I need it. 😆
Praska Boy's Garage got lucky and found a meerkat 50cc for free so now the fun begins !!!!!!
charlie hill Can’t beat that price!
I need help I put all new wire harness on it and have spark and it’s turning over but not firing at all I don’t have a carb on it right now because the one I bought has a huge choke lever and it hits the frame so I’m trying to at least get it to pop but dont have the right compression tester tried starting fluid into intake and no pop no bang lol I’m lost
charlie hill I hate to say it, but if you have spark and it’s not popping off with starter fluid, likely there is a bigger problem. Spark, Fuel, Air, Compression and it sounds like you have the first 3. Next step for me is a compression test followed by a leak down test.
You cant buy small atv in that shape here for less than 200 that is around 250 usd... and for some of them like one 110 we have im not able to find front stub axle, just over internet from USA for 24 usd but shipping is like 70 usd so i will try to rebuild it wiht some wellding and milling...
Hey man I'm a new sub and you might have spent a lot of money on that but you built that for your son so well worth it no doubt about it and he loves it man and I do too so keep on keeping on my good brother and we'll see you around I've seen a few of your videos always a big thumbs up👍👍👍👍👊👊
Roy Nelson Thanks your for support brother! This build was a blast for me and getting my boys involved!
@@PraskaBoysGarage absolutely brother that's for sure👊👊
For the brake wires in the front. There’s a fairly long wire that comes out the front that in a different video you said needed to be touched together as though the brake was being pulled. Did you connect that to the hand brake?
If so, there’s another wire that also comes out the front that is a two wire with a male two wire connector, where did you wire that or did you to them altogether to the hand brake?
Looking for softer shocks, I have a 110 ( I believe ). Thinking there might just be old & stiff but don’t want to spend that much if there going to be the same as what are on them now I’m 220 lbs & it won’t squeeze down much. So should I try stock or just go smaller coil springs ?
I love the vids
nice work dude
Thanks brother!
@praskaboysgarage, where did u find an engine stand like that for your bench?
My engine stand is my #1 comment across the channel! I came across the stand on eBay back in January 2018. The seller was bomcbe2kz7 If I remember correctly, I paid about $110 with shipping. It has 3 mounting plates for different types of small engines. Definitely money well spent for my shop!
I love it...4 year old, it could get weird! Lol
Lol, I didn't know what he was going to say! I think he made a good choice!
i have this exact atv! exept mine has a bad piston and good plastics
That's good because top end kits are way cheaper than trying to replace plastics! Good luck on your project!
I got a 125 that the engine started rattling. Found the oil pump had seized from a small piece of metal getting in it, it also took the teeth off the oil pump timing chain gear. Debating on if I should scrap it, or fix it. Means tearing it completely apart, splitting the case and making sure there isn't more damage. Also considering a new 110cc. Would there be much power difference?
Hope the charging systems are butter now. Bought one for my brother new and always had to leave on a battery charger.
Matt Smith I’ve ran into them sometimes pulling a draw from the battery. Ended up being a bad starter relay in my case. Just have to do some trouble shooting to find it.
Used same gas shocks on front. Went with the gas shock on rear. Thinking that might help prevent frame from cracking.
Never heard what the compression should be on the cylinder, thanks for the vid
It will run with really anything over 90psi. A good goal to shoot for would be in the 120-150 range.
Amazing video
Thank you!
Inspired greatly I have a 150cc coolster I am really thinking on tearing it completely down to frame and just doing what you do and replace harness and do deep clean on everything cause ex owner used to mud all the time but never really took care of it as to keeping it clean
It is extremely satisfying to clean them up and make them looking good! A good scrubbing goes a long way! Good luck on your project!
Yeah totally I had to completely rebuild my carb. Come to find out there was a tiny gravel in my pilot jet and it had infused its self in there and now we are back up and running.
@@mrpanda4081 I actually have had a lot of people request a carb tuning video on the channel. Anything specifically you think I should cover?
Well basics like proper float heights proper cleaning on the jets and also plungers in the carb. Those 3 things I had to adjust for my quad all is needed now is a better air system maybe a cone filter instead of a air box
@@mrpanda4081 Nice, thanks for the advise. I'm new to making "How To" videos and I always seem to miss a few of the details. Appreciate your help!
Any idea where to purchase replacement lower black plastic potions of the body?
They don’t waist any weld on them. I have one. Almost like they just tacked it & forgot to come back & weld it up Crazy
Great video.
Thanks for the video, is it possible for you to slow down and show all the details of your video? Or is there another more detailed video I can watch?
Recently picked up an unknown Chinese kids quad unknown cc, that doesn't run. I jumped the started and it turns over, no spark, the wiring is questionable, not sure what the coil or solinoid should look like, missing air box and connections to the fuel tank etc. Any help would be useful, trying to get this going for my son. Not sure what website to get parts from. Thanks.
I just picked up a identical quad in Australia. For free. But the frame is twisted. I going to try gently bending it back (sledgehammer and crowbar)
Awesome! Good luck on the project!
Praska Boy's Garage it’s done, I picked up another for $40 from the tip shop and used the best bits from both. Just waiting on wiring and battery :)
Those shocks should fit the red and black 125cc you have
Sid Welch Yeah, I was really hoping they would work but your right. I’ve got them saved for the next time I need to use them!
Really nice vid man 👌 i need to repair a 70cc loncin thats pretty much the atv and you gave me some tips on why it wont start and what should i do so a really big ty!
In my experience no run issues mostly come down to a fuel problem. That's why in all my videos I replace them with new carbs. It's just money well spent and they usually all need them! Good luck on your project!
I am curious if you could put the plastics (faded) into the oven and bake it at a certain temperature and bring back some of the shine?
I cant say I've ever tired putting them in an oven before, but I have used a heat gun and torch. From my experience it does bring the color back but it's less than perfect. So I find it easier just to spray it!
Dude, modify your table with rollers and straps and you can run it full throttle for tests. Kind of like Dyno.
Love the videos brotha
Thank you!
just wish there was more showing 'how to' rather final results-- it's like the home shows that just show how everything looks when it's finished, fun but you never really learn anything.
Cute kid!
Thanks!
wisconsin praska boys! ( conrads packer hat)
Lol, yes we are big Packer fans in the Praska home!
New subscriber here bud, nice video and a great rebuild...👍
Thank you! I appreciate the support!
Can you help me figure out what I have. I’ve got 2 motors. 1 is 49cm2. So. I get that. But my other one there is no number but the other side says TZH. That’s all. Please help if there is a way other then the cylinder. Thanks
sweet video yo....keep up the radically awesome vids
Thanks Man! I appreciate it!
You can use toothpaste and baking soda to polish headlights.
Hi have you got a video that’s just changing the top cylinder head off a 110 Chinese quad, as my spark plug thread rounded off so plug don’t tighten up or stay in, so wanna try change it myself, as the spark plug thread only problem thanks!!🏴🇬🇧🏴
Sorry at this time I do not. I do plan to make one the next time I get a motor that requires a rebuild!
Hello im working on a 110cc atv like yours and tried to see if it has good compression like you showed.But the starter just spins the chain and Not turn the clutch .help?
If you can shoot me an email with a video that would be awesome! I'd be happy to look at it and let you know what I think is going on.
I had 110cc atv just like that and it did 78km/h with 13/43 sprockets...
NK Motor I’ve never done a sprocket swap before. Always just run stock. That’s way too fast for my little guy!
@@PraskaBoysGarage but in throttle has limiter screw at the back or then it has just hole where u need to put the screw. And u should put that killswitch where has the cable so if u fly it come off and shut down the atv. Btw sorry if i have bad english :D
@@PraskaBoysGarage and if that atv have 14 fron sprocket change it to 13 cuz if chain snap the chain will broke stator cover with 14, that happened to me and with 13 it didnt broke stator...
I ordered a carburetor from Amazon for my kids 110cc atv .. it came with the fuel line hose and some other hose the bottom .. I have no idea where that hose goes or if it’s never needed .. I bought the atv used and the carburetor it had didn’t have that hose connected … I just pulled the bottom hose off and it’s been running fine so far .. anyone have any idea where that hose is supposed to plug in to? Or if it’s even necessary??
It's an overflow drain line. You just let it hang along the side of the motor. So in the event you have an over flow gas doesn't land on your screaming hot motor! I'd advise you put it back.
1st compression test was probs a failure, due to not opening throttle 100%.... need a WOT or remove carb, to get maximum air in, to get accurate compression test results
Yes, you are 100% right. I'm not sure what I was doing there but I flat out missed it! I made sure not to do it again on my future builds!
@@PraskaBoysGarage yah ive watched all ur vids man, Great stuff :D I subbed :)
You have the footage, have you thought about putting this in segments and have several different videos on the whole build. just a thought. Since you have the footage. Some ppl would like a play by play.
I have thought about that a lot actually. My thought was to break the builds up as a series that way the subscribers get more video content more often and I can go more depth on the builds. Since this is a hobby I'm limited on time for the shop plus trying to post and edit takes awhile. Hopefully soon I can make a dedicated schedule!!
Hey, I do some what the same thing with these things up here in Eastern Canda. Question for you I need to go with a bigger sprocket on the back or smaller front one for my sons 50cc ATV.
I do agree with you on the wiring with these things. For the price of them there worth it
Salty Monkey That’s awesome! I would definitely recommend smaller on the front because is extremely easy to change. Those rear sprockets are way more hassle!
@@PraskaBoysGarage Perfect thanks, where do you usually order from
Salty Monkey VMC is always my first stop! www.vmcchineseparts.com
If you can’t find what your looking for then just eBay is my next go too!
Mine starts in gear so basically moves from the second I start without pushing on gas. Can you please help me
Great build. What kind of suspension did you use and where did you get it? My son has the same quad and it's so stiff. He bounces all over.
Thanks! I went back to the stock suspension because the shocks I purchased didn't fit. The air canister hit the A arm so its back to a stand shock for now. I still haven't changed it, he is having too much fun riding it for me to tear it apart again!
Can you do a video on your table set up? Been looking to make one to work on my 4 wheelers.
Lee W I hope my channel gets big enough to do a full shop tour but I don’t know how much interest I’ll have this early in the UA-cam game! The table was a 4’x8’ display table from a closing Kmart I bought for $50 bucks and I threw a Harbor Freight winch on the wall. It’s works great for my shop size, the only complaint is I can’t raise and lower it!
@@PraskaBoysGarage thanks for the reply I really like the table I was thinking of making 4 by 8 as well
Never mind I finished the video
Perfect! Thanks for watching!
Hey buddy greets videos I have the exact same one I'm working on and thanks to you I have the right wiring harness. Haha but my rear brake assembly I cant find the Ebay # you had doesn't show up any more
Glad you enjoy the video! Try this one: 121046414789 I bought mine from china direct this one is a US seller so it's a few dollars more. Good luck on your project!
Where did you find that engine stand?
Where did you find the bushings, or what did you use for the a arm and spindel bushings? I'm rebuilding one for my son, but not sure where to find them
Hey by chance, do you know what type of bushings they use on the rear swing arm? Mine are hella wornout, aswell as the a arm bushings
I see that left tire from last build is still on reverse
Yes that’s right, I started this build as soon as I took the 110cc off the table!
Think a wiring template for future builds would be helpful.
Love your Videos man. Very imformative. Keep em coming
Thank you! Next video is currently in pieces on the table now!
@@PraskaBoysGarage awesome man. Hey can i ask you a question as well. Can you help me. Im in a similar situation. I bought a 110cc. It was running. But then it stopped running. I have cleaned the Carburettor. Cleaned the spark plug. Its just not turning over. It sparks but engine does not run. Any help would much be appreciated.
Please help...this is driving me nuts..I have a new wire harness and new coil a d I am having such a weak/no spark. What do you think
Send me an email with your contact info! I'll reach out and see how I can help!