Це відео не доступне.
Перепрошуємо.
You bought a 125cc Chinese ATV! Now What? -Complete Build
Вставка
- Опубліковано 13 лис 2018
- On this episode of Praska Boy's Garage I show you what I do when buying a non-running Chinese ATV from start to the finished product. I cover welding the frame. Brand new wiring harness with all new electrical components. Motor compression check. Carburetor installation. The body work and more!
~Parts Used~
Undercoating - amzn.to/3ocRu0K
2 Coil Wiring Harness - amzn.to/2XZdQIx
6 Coil Wiring Harness - amzn.to/33XegiK
BATTERY: amzn.to/3kKjd6G
Carb & Filter: amzn.to/368bnQh
CHAIN: amzn.to/2QQa4fS
Fly Grips eBay item#: 332335168819
Rear Brake Light - amzn.to/3GOM4BU
Total Build: $304.25
Thanks For Watching!
Copyright Free Music used:
JPB - High [NCS Release] • JPB - High | Trap | NC...
Bay Breeze by FortyThr33 / fortythr33-43
Thats a proper job now.
Got one for my younger brother to rip around in our backyard.
loved your wiring harness video.
Thanks to your videos I now have 4 110s every time I got stuck on a problem I just watched a video of yours great job man
Love to hear it! Thanks for subscribing, I appreciate the support!
Great job bro! Your videos are definitely helping me get my son's ATA 125 D that I got in a big tote box. I have the same passion for for this hobby as you do so it's pretty cool I found your channel. And I believe the thing your calling a magnifier is actually called a rectifier. Again good job and thanks for the videos!
I just bought a 2015 Tao 110 pit bike that does not run for $50 bucks and after watching this video I have a bright outlook on what’s to come. I’ll keep you posted
You did a great job resurrecting this quad, one item was not corrected though, the rear axel wheels need to be switch over, left to right side, theses tires are directional.
I bought a non running 125cc has good compression, wiring was twisted together and masking taped together. Went on ebay and bought complete harness kit, everything like you pointed out in this video not one frickin wire would plug onto another. I'd gladly pay somebody to correctly connect all these wires! If you knew someone interested.
just picked up my son and our first 110 atv project the wiring is a nightmare just trying to find the right wiring harness but like how informational you was in your video
Tdog thunderc*ck Thank you for the support! Next week I’ll be posting a step by step guide for installing a wiring harness. I’m going to go over what to buy, all the components, how to test, and install!
Love the videos! I am so impressed with your work. I am struggling with my son’s Tao Tao 125D ATV but these videos give me hope! I think you should get some custom “Praska Boy’s Design” stickers for your finished product!
They're really simple once you get the hang of it thanks to you
Yes for sure! Thanks for watching!
Great job Hudson! Boy I wish I had that kind of time in my hands. Fun project!
Thank you for the hard work you do, this channel has helped me more than once
Happy to hear that! Thanks for watching!
Great videos. I recently resurrected a 125cc pit bike I got from the tip for my daughter and just the other day scored a 125cc quad from the same dump. Someone has destroyed the wiring harness but with your vids I'm keen as to sort it. Cheers!
That is awesome! Glad I was able to help!
Why remove the neutral indicator switch? Instead, run switched power from the ignition to one of the neutral switch leads. Connect the other lead from the indicator switch to the power lead of the indicator light. The remaining indicator light lead goes to ground. You will use 1 m of wire and several crimp on wire connector ends. If you cannot figure out how to do this, shrink wrap a cap over the ends of the neutral indicator switch leads and zip tie them out of the way. That way the switch will be there to connect the circuit back up and there will not be any dangling wires in the mean time.
Jeffery Wright I agree with you 100% However for my videos I want to keep the builds simple. UA-cam wiring videos are chaotic and hard to follow! I love the plug and play option and unfortunately that means losing the neutral and reverse light sometimes. You should do a video explaining how you would hook it all up! I’d watch it ;)
I like watching videos they really teach me a lot about those chines atv's real educational thankyou
Thanks Johnny, glad you enjoy them!
@@PraskaBoysGarage I like how you enjoy doing these videos. Since i started watching your channel i have been motivated to try a build myself. thanks so much hope we will see more content from this channel.
@@Ken-sk4bb Glad to hear that! Thanks for watching!
This video deserves attention!!
Thank you for the support!
Has to be the best video I have seen on UA-cam on stripping down and rebuilding a quad, but most of all they way it was explained on the electrics the rebuild and spray job, if this is not your daily job well you you have great skills to keep you going in your retiring years you are a great mechanic, O by the way the wheels are on the wrong way on the back axle, thank you so much I enjoyed the whole video, and I subscribed to your channel.
Cheers from Ireland.
Thank you very much! I did notice the wheels were backwards and swapped them out before I ended up selling this one! Unfortunately not my day job, for now it's my hobby shop to keep my kids entertained!
Thank you for going over that wiring segment👍👍🤔 i have a frame im just waiting on a motor
If you need a more detailed explanation I also have a "how to" wiring video that goes into it deeper.
Well worth my sub. Keep up the great work. Now I just have to find me a free one or a old one sitting around cheap for me to rebuild. Thanks for the upload and can't wait to see more.
I appreciate the support! Thanks for watching!
Thanks for the vid!! my buddy has an ATV that I believe is exactly like this one. He said its not running and wants me to check it out for him. I'll probably use your vid as a reference guide lol! Thanks again!
Awesome job man. Picked one of these up for $60 recently and rebuilt it for my daughter. Only thing I had to buy was a $25 harness and I decide to change the engine from the 110 auto that was ticking to a 125 with reverse for $30.
Frank Thanks for the support! I don’t think I’ve ever scored a deal that good! $115 bucks to put an ATV back on the road is crazy! Nice job, I’m always looking for those kinda deals! 😉
Where’d you get a 125 w reverse for $30
I do a lot of these there cheap made but you can turn it into something useable
Absolutely, thanks for watching!
The item you referred to as the magnyfer is the voltage rectifier/ regulator
You're right. I have a complete wiring video where I use the correct verbiage.
You are killing me! I want to buy one of these just to rebuild it.
I own a screwdriver and a roll of duct tape and no mechanical skills. I should be okay, right?
Hey man, you gotta start somewhere! I started with a 49cc pocket bike that was in pieces on my apartment kitchen floor. Be thankful you have a screwdriver I had a butter knife and elmers glue!
Praska Boy's Garage I wish you were near me. I would buy one of your rebuilds in a minute. Obvious you care.
I’m wanting to get a cheap 110 for my grandkids. Do you have a recommendation for a new one? A brand? Thanks.
They are all very similar but I would recommend sticking with the most popular which are the 110cc. They have the most available parts and are pretty much universal between brands. The 2 brands that come up the most is Apollo and Coolster. I would stick with one of those, that's my opinion!
yes if you can learn i am self tought and can build any engine but this cram makes sence to me
Amazing video, I just got one of these. It is not however 125cc, it is 107cc that makes the same horsepower as a 125cc. I measured 5.02hp - 4.8tq on the engine@5200&5400rpm.
Top speed 32mph, I will do pre/post video with performance carb, air filter, ngk plug, and 91 octane vs stock w 87. For the record, 91 does much better on these engines regardless.
Brad! I need your help! How did you get all those specs? I have been researching small engine dynos both buying and building because I want to be able to build and test performance engines. Can you help me?
@@PraskaBoysGarage My friends shop has a Dynojet 250ix, out in Oceanside. They shut our county down so I have to wait to get back in there. The torque also is quoted to 6.5NM at 5500rpm, that was actually accurate to the wheels. You can either find one of these dyno’s, or work that number back from nm to tq, tq to hp via rpm. The actual dyno proved only a few hundredths off of calculation, if you know the % of power your upgrades will produce on other similar engines, you can use my dyno as a platform to launch. If your looking for raw big power gains, look no further than changing out the gear ratio. You’ll lose a few ponies up top, but massive tq gains will increase your acceleration and uphill maneuvers. If you screw with compression, bore, port polish and so on, expect to replace the flimsy rod before it snaps. The 107cc is already at the top of its power band and a bit beyond, hence its power matches 125cc specs. Also why it prefers 91 to 87 octane. I’d not toy with this engine too much further than what I’ve already done.
I wish I had your skills.your the best I've seen
Thank you very much!
That engine stand is awesome
Best purchase I could have every made!
Where did you get it??
Great vid and info...i have bout 8 of those motors if interested in them...all low compression from what i can tell...i put 212cc on the atv frames and kept the original motors.. few 125cc and 110cc, and a 150 speed motor...have 2 atv 125cc with motor on them i haven't swapped yet. Good bodies and seats... just checking with you cause you helped me out alot with troubleshooting my kids atv...just let me know if interested..almost giving away lol..thanks in advance and have a blessed day
Loved this build. Thank you for the content.
Glad you enjoyed it!
Cool stuff, rather enjoyable to watch.
Cheap Chinese 125cc quad sell new for say $900. You sell it used and refurbished for say $500. With initial cost, additional parts, time and labor, there is no real gross profit. Good job though. Step one is to see if the engine has compression and actually runs before going any further.
Nice video and informative and your right not everyone ca. Afford the high end quads so these will do and I also find and fix these lil Chinese quads and bikes good luck and look forward to the next video...and that was funny when the first pop off of the engine you jumped I've done it a few times myself lol good work tho
this video helped me a lot thank`s for taking the time to make it
Absolutely! Glad I could help!!
Hey Mr. Genius, the world needs your help. Can you make a video on how to upgrade the stator from 6 coil to 8 coil on POS chi-nah crap machines?
I couldn't find one video and would like to know how to convert 6 coil to 8 coil. Mainly for light bar power... Thanks
Just got me self a 125cc Chinese ATV that needs a chain and sprocket and was wondering what size to buy.
Your videos are really good and really helpful.
The most common chain size for these is 420. Rear sprocket size will depend on your torque/speed your looking for. If you google go kart gear ratio calculator is will give you links to input your wheel size, drive sprocket and rear sprocket. That will help you determine what tooth to purchase.
@@PraskaBoysGarage thank you very much for your help
@@PraskaBoysGarage cheers for the advice on the sprockets. I have another question, I recently bought a new wiring harness with stator, when I went to fit it yesterday, I noticed that connection to the stator is different from the wiring harness, as in the stator has a connector block and the wiring harness just has bullet connector that you push together. Can you buy a connector block that would just fit on to the bullet connectors, or do you think I should cut the bullet pins of and solder them together.
great video man! i bought one and im rebuilding it too.
Thank you! Good luck on your project!
Back tires need to swap sides. Tread pointing the wrong way.
tdclymore Yes, 🤦♂️ it’s my number 1 comment from this video! I swapped them before I sold it, I was just in a hurry because this was my very 1st youtube video!
Hi my friend I have new wiring same as you did but I have no spark motor turn over great. What would you say check next
I love your channel a lot in your videos are interesting I have a 125 at the wiring is messed up my dad and I are trying to fix it I don’t really like Chinese ATVs and more for Polaris
Thank you! If you haven't seen it yet I have a complete How To wiring video for the atv. Good luck on your project!
Thank u 4 a great video. All the info i needed to start with my atv mod
Absolutely! Good luck on your project!
@@PraskaBoysGarage thanks
A 17 INCH bolt for the oil drain? WOW! That's a BIG bolt! ;) Seriously, loved watching the video, I am currently rebuilding a couple of 110's myself that I got for free from a friend. I'll be checking out your other vids and I subscribed.
Max Imus AH MAN! I’ve probably watched this video over 50 times in editing and never caught that! 17mm!! Good luck on your rebuilds! Thanks for the sub!
The thing you call magnifier is a rectifier 😊👍
Noted, thanks!
Hey BJ, love your videos. Very informative! Hope you will be making more content soon. I have a quick question about the parts list you posted. there is a 2 coil wiring harness and a 6 coil wiring harness. Why did you buy both?
VERY COOL.
Thanks Edward!
hey brother love your channel but the only thing i see that you should be doing is you got that flat screen tv behind you in a lott of shots you should have your logo lit up on that TV so the person just passing threw knows who you are just a little something i thought would be easy to do and help your number of subscribers go up a little bit better if your looking to grow but awesome job on e erything you do a great job hosting and explaning everything keep up the great work !
That would have been a good idea! I've swapped it out for a white board. The shop life just wasn't made for a tv!
Maybe you might want to use an above camera
Dano
Will do, thanks!
Very inspiring videos! Great job!
I went ahead and started a build of a 110 cc but have a hose coming from the rear brake that i have no idea where the other end goes to. Also have both a right and a left brake for front and rear so I dont know which one i should hook up to the wiring harness i have since the harness only has one set. Hope you can help. Thanks and keep it up!
If you can send me an email with a few pictures I'd be happy to help! The email is listed on the "about" tab on my UA-cam Channel. Thanks!
holy sh.. that's a ton of work, wow
It was for sure! Definitely a fun hobby!
Admire all your work, the neutral and reverse switch is throwing me off, what does that cable do?, Can i just remove it??
Great video. Enjoyed watching it.
I buy these all the time...cheepest was £20 dearest was £60.i paint every 1 matt black...tao-tao.they are simple to build..i prefer the Kazooma quads.
Nice! I love the flat black look for sure! Try using bed liner, that stuff looks great and makes painting super easy!
@@PraskaBoysGarage thank you...i di the same as you..buy rebuild and sell on...im known in scotland as matt black mac 😂i have buyers on the phone asking for any other colour..its normally a no.😂
You need to make a video stretching a atv man.Really love your videos it helps alot
I'm really getting into performance mods recently that might not be a bad idea! Thanks!
@@PraskaBoysGarage nice call my name in the video when you doin it👍👍big fan from Trinidad an Tobago
Great video I just picked one up and got the wire harness only problem I'm having I hook up all the wires and I get nothing but when I hook it up like you did with the starter and battery and it turned over but not when I hooked all the wiring harness up any ideas what I'm doing wrong ty
Where’s the best place to find these Chinese ATV’s if I want to start fixing them?
Your rear tires are on backward!
ItBseCtioN8 I noticed that also and before I sold it I switched them! Good call, hopefully someone doesn’t use that tread pattern as a reference for their projects!
They are not on backwards because the tread it supposed to scoop the dirt and push off, if you flip them it’s gonna scoop the dirt and not grip as designed
Great video, I wish you would have one like this on a Kawasaki Prairie 360!
I'll be honest, I am not much of a Kawasaki fan using we are talking crotch rockets. I prefer Hondas when it comes to small engines.
What causes stator to have no power? All new harness kit
Nice good work looks like fun!
They are a blast! Thanks for watching!
have you ever had to rebuild one of these motors due to scored piston, rings, or cylinder? I'm only getting about 60psi's on the compression test. I need to check the valves next to see if they are 1) not sitting right, 2) need adjustment. If you did have to but valves, piston or rings... where did you buy them from? TIA!!!!
Watch this rebuild I did: ua-cam.com/video/UwdPQMB3rmY/v-deo.html I thought maybe the low compression was from the carbon build up and scoring but really it was from a broken intake valve spring. I buy the top end rebuild kits on eBay. Do you think if I did a step by step for the complete top end rebuild would be beneficial? I've been contemplating that idea for an upcoming video!
@@PraskaBoysGarage I think this is a great idea. Your videos are a great overview of how to rebuild a tao tao. Very educational. I think it would be a good idea to do a tao tao series. 10-20 min videos on each section of the rebuild in detail especially on how you take everything apart. Great videos! Keep it up!
I'm about to paint my ATV plastics, do I need to use a bond enhancer? I keep on reading that whenever painting over plastic, to do a light sand and then use a bonding enhancer because plastic is non-porous.
That was awesome! I've got a chinese ATV that will need some work soon. Not looking forward to it.
Come on!! They are a serious love/hate relationship! Believe me I have my days too, but in the end getting to see my kids ride makes it worth it!
ykolffys
you aredum
You are awesome!!! Great video and content
Thanks Dan, I appreciate that!
I have 2 125cc Tao brand quads that I’m getting ready to rebuild. One was running but now I can’t get it to fire even with a new carb and the other is shooting sparks in between the head and the cylinder
Shooting sparks means you likely have a ground issue or a bad coil! Hey at least you have spark, that's half the battle!
The back tires are backwards. Look at the thread.
Silly question... but what Squeeze Bottle do you use for your fuel? I'm starting to work on small motors more and more and getting tired of using a cup to pour gas to check combustion and spilling gas everywhere lol!
Ceasar D. I’ll be honest they are not the best but for only $10 bucks on Amazon I’m not going to complain! Amazon ASIN B07QV3PJML
Great Video. Any chance you know the part number to replace the exhaust? Mine cannot be salvaged. Thanks in advance.
I don't know the exact one but if you check out VMC Chinese Parts they have pretty much every exhaust a guy would need.
how could i fix the rear allighment on a quad like this one i have a 150 cc kayo storm that rolled and i fixed the wirring harness but the alighment is still messed up
Great video bro,, hey I didn't the exact same process but I still get no spark.
Hey man, did you get my comment before UA-cam took it down?
Very informative video! Thank you
You bet! Thanks for watching!!
Amazing video
Thank you!
Where the frame broke I am surprised that you did not use angle iron to reinforce the spot where you welded
my son's 110 tao tao took a crap i put a 212 predator harbor freight special now we call it the predatao
Lol, love that! I've worked on so many predator motors at this point I think I could assemble one blind folded! They are great little motors for a value you get!
Mate great job!but you could clean the motor
Thanks for the tip!
I can not find a replacement plastic body for mine.
When I bench tested my starter with my generator it spun but after installing and jumping with my generator nothing is happening puzzled here what to do next
Love the videos. Any idea if that wiring harness works on older Honda ATVs with pull start?
Thank you! This harness is set up with a specific stator the fits inside the flywheel case cover. I would not work for the older Hondas. You might get away with a mid 90s- early 2000s Honda dirt bikes and using the chinese dirt bike harness, but that's about it.
Love your videos but i never see you adjust the carb.. is it good out of the box? or actually show the process of what needs to come off to remove the engine. maybe in the future?
Yes, that has actually been highly recommended for a future video. I will do one for sure! Brand new carbs are about 90% ready to go. You may need to adjust the fuel/air screw at idle and the idle screw. Otherwise there are usually plug and play.
I just put a new motor in mine and now I'm getting a hot negative wire when I try to start it 😢
When you said you took out the rear break light out is that the little bronze clip just above the front sprocket
Bronze clip with the cable coming from it
Neutral and reverse light
Yep that right!
oh no the back tires are on, BACKWARDS😂
have you ever bought a total wiring harness and had a no spark issue. I've been chasing this no spark issue for 2 days now. any thoughts. thanks
dude try to clean the rotor and magneto, could work, maybe it could be some smacked cable
Sorry I'm late to this comment. Are you still having issues or did you find out what it was?
Praska Boy's Garage dude i have been having these problem and the problem was= ground😁😁
Hey Praska. I just changed the wiring harness on my son's Taotao 125cc atv following your video as well as some of my own mechanical knowledge. My son's 4 wheeler has the neutral, reverse sensor cable as well as the green and red light up near the handle bar. How would I wire that up using whatever I needed off the old harness? Is that possible? Really hoping you reply. I need your experience. Thanks
Where do you keep finding these? Craigslist, Facebook?
First Thanks for answering, Engine 119.6cc, 4 stroke
Cylinder Arrangement Single
Engine Type 152FMI 4 wheeler Go Kart 125cc Chinese It came with a plastic quart of what I assume is break in oil, looks like water and dont understand where it goes ? Thanks
Alright now Im not 100% but here is my educated guess: The oil is for motor break in. Add the oil to the first full tank of fuel. That way when it burns it will add an additional layer of protection for the cylinder wall and rings. Mechanics also use this technique when trying to bring back a motor to life that's been sitting for years.
Thanks again, I finely decided to drain the shipping oil and put Castrol Synthetic Oil in then when I got to the battery it was empty no acid. I think that is what the clear liquid in the see through jug was Battery Acid. Any way after i finely figured out there trick on starting it foot has to be on the break in neutral for it to turn over & and the 125 cc runs like a bat out of hell, am 6 foot and I can even drive it and my son loves it and it's just big enough for me to sit in it teaching him how not to kill himself. None of all that info was in the translated from the Chinese instructions, Anyway pretty good deal for $1,400 ON Ebay Free Shipping The Instructions just really suck. @@PraskaBoysGarage
so should i just match the wires by color if theres no wiring diagram?
normal men do sametime if have repair frame made frame many strong support sheet plate, then frame have better and dont broken later .
A good way to strengthen a frame that's broke like that it's to take pipe and cut it long ways in half. Drill holes in it so you can plug weld up and down the frame. And then you can weld the ends as well. You can put 1/2 on the bottom and 1/2 on the top if room allows but you can't put it over top of that heavy booger weld!
Love that idea! Thanks for the tip, I am sure I will be using that in the future! Thank you!
Awesome man.
great videos and glad someone is making them. I see most of your videos are currently chinese made wheelers, in your opinion are they worth buying for kids? i'm thinking about getting one for my 8yr. old
It's better to buy an old used Honda, but some of those Chinese atv's are good enough and I'm sure any 8 year old will love it
If it's the first atv for the kids I would start with a Chinese brand, but buy it brand new. I've seen so many parents buy name brand or chinese brand and the kids don't ride them and they just sit in the garage. I've fixed everything so they all break regardless of brand, but I've learned it's all about the rider and how it's taken care of. As the kids show they want to ride more then I would look into buying a new or used name brand atv.
@@PraskaBoysGarage that is great advice thank you!
Question : did you fight in UFC because if not why is belt on wall
Haha, I wish! No I've never fought in the UFC. I'm just a huge fan and its an exact replica. I'll got a few signed NFL jerseys I plan to put up also.
good vidio
I’ve watched this video more time then needed lol, every time I have a question I always mean to come to the comment section but I get dragged back into the video then forget it by the time it’s over, well not today. The question is, the neutral/ park thing you took off behind the cover, does the new wiring harness come with the wires to attach it?
No it does not. The wiring harness is generic and does not have the plug for it. I have a "how to" wiring video that goes into detail on the install process!
Praska Boy's Garage okay. Appreciate the reply.
I had one and it was a 2 speed automatic and about 145cc and damn that thing was fast😅
Any advice on finding a correct schematic for tao tao ys110, i have had a heck of a time finding information for this thing.
Are you looking for wiring schematics? I can send you a diagram, just shoot me an email to praskaboysgarage@gmail.com
Keep making more videos
I have to ask, i keep noticing. What's the significance of the UFC belt in the shadow box?
Nothing really other than fan memorabilia. I am a huge UFC fan and I purchased the replica belt after TJ won his first title.
@@PraskaBoysGarage what are your thoughts now after t.j. got poped? J.w.
Jake Phelps Still a fan and he’s still my favorite fighter. I called it the second he walked out for the fight against Henry that something was wrong. Dude should have never cut that much weight, and I’m sure the PEDs were to offset his loss from all the weight cut. I don’t like what he did but 2 years is too long of a punishment I think. I mean he tested clean after beating the snot out of Cody both times!
@@PraskaBoysGarage crazy how cody did so great against Cruz but Cruz got everyone else. Yup ufc is awesome! Jorge masvidal is on a tare! Thanks for the reply and your videos are SICK! keep pumping them out n them subs and views will continue to sky rocket!
Jake Phelps Yeah that Cruz fight made Cody look unbeatable! Thanks for the support man, I appreciate it!
Great job 👍🏻
Thank you! I appreciate it!
Can you do a video from Comanche Kazuma Falcon 90cc
MasaFN If I come across one that’s a good candidate I defiantly will!
I have a 2013 TAOTAO ATA 110-A So there has to be a brake light bulb or wires touching one another to complete the circuit to be able to start ?
Yes it is a safety built into these machines to start. You can check out my wiring video if you want, should be able to help you out!
I have a 2020 200cc Tao Tao ATV, I'm wanting to upgrade speed and power, any suggestion on where to start and where is the best place to buy parts as I upgrade?
Best bang for your buck is to upgrade the carburetor. They sell a 32mm mikuni Chinese knock off on eBay that works great. That and a lithium battery are my go to upgrades if I am keeping them!
Love the channel. I'm working on a Tao Tao 110cc. The body isn't worth saving. Do you know where I could get a replacement body for a decent price?
Thanks Ed! The only place I've purchased new plastics from is VMC Chinese parts. I look on Facebook market place for a to find a parts ATV first, but if nothing is available then I buy them new.
Where did you get that paint stripper from? I need to repaint my sons 4wheeler body.
I used Klean-Strip Aerosol TO strip the paint and you can purchase from a local home store like Home Depot. Here is a link: www.homedepot.com/p/Klean-Strip-16-oz-Premium-Stripper-Aerosol-CA-Formula-EKPS302SC/311799645