Fisher Paykel Washing Machine Seal Replace , You Can Do This !
Вставка
- Опубліковано 29 сер 2024
- A tutorial on how to replace a fisher paykel washing machine seal. If your seal is leaking or torn you can repair it using this video. This applies to most front load fisher Paykel washing machines. A DIY video on how to replace a boot gasket
Really good video. The bottom plastic panel comes straight out. Not up, not down, just a straight pull. For the seal, I found it easier to fit the inner seal first, then the outer seal just seemed to drop in place. I also found it easier to remove the three screws (top) that hold the softener box in place. Makes it easier to remove/refit the front control panel.
Tip: I had real trouble getting the wire seal retainer in place. I wiped the wire with dish washing liquid to act as a lubricate. That made the job a lot easier.
Cheers for the videos mate! I have the same washer and using your videos I changed the seal, replaced the heater element (which wasn't working) and replaced a bunch of buggered LEDs on the front display. It's now back to 100% and working perfectly, thanks again.
Another reason you might want to do this is if the drum spring launches itself into low orbit, the drum catapults itself into the side wall and seal creases more than Gordon Ramsey's forehead. We got it done. No way without this video. Thanks, mate.
welcome glad you could get it sorted
This is an excellent tutorial!! I had never worked on a washing machine before, and would not have even attempted this job without your clear and detailed instructions. But with your help, my 10 year old son and I followed your advice to the letter and we got it done!!
Advice to others - always check your pockets for drill bits before washing clothes 😬
Hey man, thanks so much for this video! Helped me clean my machine when a sheepskin fell apart inside it. From New Zealand
Glad it helped!
Hey I’m doing this in nz as we speak, do you have a part number for what you ordered by chance?
Thanks. This was super complex and fiddly. Got it done though. Wouldn’t have had a chance without your clear instructions. Thanks. I’d wish they’d designed these things to be easier to work on for the layman!
Agreed. The older top loader design is much easier to work on - many pieces just clipping together. My 20 year old smartdrive just goes on and on - I've done some small maint jobs.
I think F&P have been given this design i.e. they just sell them.
Great step by step tutorial, made the job super easy 👌🏻
You sir saved me a heap of money and heart ache. Thank you kindly for such a great instructional video!
Thanks - bought the seal from F&P delivered for $95, and followed your vid ... mine's a bit newer and doesn't have the strip along the bottom, but has 3 weights to remove. But otherwise the same and a good result. Saved $250. Good man. Thanks!
You saved my washing machine! I had to replace the chrome part of the outer door. It arrived today so went to remove the hinge from the washing machine so I could reassemble the door with the hinge in place and then hang the door back on. Easy right? So I unscrew the hinge and clank! the mounting plate on the other side of the door INSIDE the washing machine falls off. How the hell am I supposed to get that!
Your video on how to change out the seal was just what I needed. All I needed to do was remove the tension cable holding the seal in place and I could squeeze my hand in and grab the backing plate. And I had enough access to reach in and hold it in place so I could re mount the door. Hardest part was getting that stupid cable back on properly.
So, thanks again for the video. It saved me a lot of money.
I just heard *that* clunk !! So you don't have to take the front panel.
OK ... here we go, another 15 min job that will take me 2 hours. 🤣
Thanks for this. So clear, managed to change it over with no complications. Definitely saved me some $$$
Thank you for this video! I'm currently replacing the entire door front and this helped me because I forgot to take photos/a video of everything first
Glad it helped!
Brilliant instructions!
Super clear and step-by-step.
Managed to do this job today, would've been a different story if not for this guide.
Thanks 👌
Fortunately for me I only had issues with the outer ring coming away after a heavy load displaced it. The seal came away, but following the last part of this video I was able to place the seal and the ring back perfectly. A great tutorial - thanks for posting!
welcome glad it helped
Thank you, great video. Got the job done !
We went on a real journey there! I think if I would have known that would take me 4 hours, I would have paid someone else to do it!
Also, I have 3 screws left over and don’t know where they came from.
Well done doing it yourself. The screws maybe bottom plate or front kickpanel,
this was so helpful and easy to follow, made me look competent in front of the lady too, cheers bro!
Thanks so much for the great video. Easy to understand and I was able to replace the seal easily with your help
Going to replace the drum bearings on my F&P soon and this is part of the job too.... cheers
Thanks a ton, you save $200 for the technician
welcome glad it helped you
Cheers.
Clear concise instructions. Very easy to do 😎👌👍
Glad it helped
Brilliant video. Thanks a ton mate. This saved me a lot of head scratching!
Glad it helped
Excellent, got me through the job of replacing the seal.
Just completed ours, great tutorial well done !!!
Thanks, mate. I just replaced the seal around my washing machine using your video. Great job.
Welcome glad it helped
Awesome, it is very helpful. Save my washing machine. Thank you!
Happy to help!
Im 62 female & I chaned the door seal. However, a couple of points: identify the model as my seal was different, it has a light.
Beware the 2nd spring to unscrew. What a nuisance to get on to. And, the door spring, describe what way it was suppose to go on. Would save a lot of time swearing. But I did it!!
Did exactly what you explain on the video! No probs. Thank you lad 🤙🏻
Thanks heaps mate. Really appreciate you putting this out there
Thank you very much for this guide, you nailed it and helped a ton
Thanks for the video. Very useful.
Thanks! I have the exact same model and had to replace the seal today
The door seal seems to get damaged from repeatedly dragging loads of washing out through the door rather than carefully removing the finished washing. Buckles, zippers, buttons etc. catch on the rubber seal and damage it
Thank you sir! Great tutorial
You are welcome!
Awesome work mate. This has indeed made my day.
Thanks mate. Glad it helped ya
Thank you bro. Awesome to actually do it.
Welcome glad it helped
Excellent instructions couldn’t be clearer
Thankyou so much for this video. It has helped me and given me the courage to fix our Fisher & Paykel 7.5kg WashSmart which is 10 years old. It made fixing it straightforward and anxiety free! I really appreciate the clarity and detail you provided. Saved me $$$ in about one hour. Tips for others - this video works quite well at x2 playback speed.
Awesome video bro, you just saved me a tonne of $$$. Thank you so much! Kia kaha!
This vid was very useful, thank you
Welcome glad it helped
Thanks
Welcome thank you so much
Just fixed mine. Thank you sir
Thanks mate !
Great video mate, love your work.
It’s actually insane how hard they make a simple change. Bizarre
Great Job
Could this be done with the machine laying on it's back? Once the top is removed that is.
Great video, well done!
Great Video. Thankyou very much. :)
Welcome glad it’s helped
Brilliant video mate. Cheers
Great video
Is it normal to have a spare screw after you put it all back together?? eek
Hello can you provide any tips on replacing outer seal spring-wire
Use a small screwdriver to gradually slide the wire into the groove . Quite easy really. And loosely screw it in first, already done up. Then tighten at finish
@@johnmac3509 yeah I couldn’t do it. Paid a person.
@@johnmac3509 Your technique works. I think it is the hardest of all the bits in this job. I read your comments after fixing it.
Miraculous!
Hey
I thought this video would help my issue, but seems as though the drum as dropped down, which isn’t allowing the seal to line up? (It was twisted)
Would you have a video about that or any tips mr washy washy?
hi remove the top cover.check if the spring has come off the support rail.
@@askmrwashywashy how difficult are the bearings to replace as we were quoted $300 for a new one installed. We have ordered the spare part and are hoping to have a go at it ourselves. Is it a pretty involved install?
Great video. The machine’s design is not very smart when such a common part becomes so time consuming to replace.
Need a video on replacing the bearings
I just did mine.
First free machine could not remove them and mushroomed the spline.
2nd machine was a little easier to remove the bearings
Great video thanks. I can't believe how much you need to pull the machine apart to replace the seal!
Is there any way to just fix a small tear in the seal, like you indicated happens sometimes at the start of the video at 0:23?
That's the issue with mine (almost exactly where you put your finger on the seal!).
You can fix small tears with waterproof silicone sealant, the type used to seal roof sheeting. Just needs a few days to dry fully.
Doesn’t look east at all. You pretty much took apart the entire machine
Thanks
Welcome. Thank you