Wonderful stuff My washing machine is doing its work as I type this message. Just under an hour but learned a lot about my washing machine. Thanks again guys !!
Hi Harry, thanks for your comment. We're glad to hear our video is going to help you fix your washing machine yourself. Well done for repairing your appliance instead of replacing it!
Thank you! This combined with other two videos on UA-cam actually helped me with a. Ordering the right part, and b. replace my door seal. However my washing machine front didn’t come off so it was 10x difficult when I actually did the job.
Hi, thanks so much for your comment here, it's great to here that you appreciate this video...hopefully it helps you to now replace the door seal on your washing machine. You can check out our range of replacement Hotpoint door seals here: www.espares.co.uk/search/ma808pt1564/washing-machines/seals/hotpoint
Just gave it a go after finding pools of water on the kitchen floor after each wash. I ordered my replacement from eBay for £16. It looked a little different, but it went on. Its a little bit difficult to get the seal on to the drum so have some small clamps close by. Other than that a great video that helps out.
This was great, thank you very much. It took us a while, as we're not the best at this sort of thing and we did bang our heads against the wall at 08.12 when you said that on some machines it's not possible to remove the front panel. We thought we were doing something wrong at the beginning when we couldn't figure out how to remove it. But we are very grateful for this video and have bookmarked it for the next time. Now, if you could just tell me where the long metal bit from the top of the machine, that we found when we closed everything up, is supposed to go........................... d'oh!!!
Hi Sara, glad the video helped, it does depend on the model whether the front comes off so you do need to work that out before you start, have you found where the missing piece goes yet? hopefully, you have retraced your steps to find out.
We've taken an executive decision to leave it out - it's not an essential part and I was frightening the cat with my swearing. Done a few washes now and no more mouldy smell, your video was a godsend.
Hi Allen, the video is only for Hotpoint machines as fitting a door seal on another make may be similar but in most cases will not be the same, we do a few different videos on fitting door seals so have a look for your brand on our channel.
Hi and let me first say great vid simple, to the point and easy to follow so thanks for that. Now my question, I have an Aquarius+ WML720 which has ceased to work and just gives six clicks of the door lock when I press the start button, it stopped half way through a wash cycle and since then just gives six clicks of the door locking mech. Is this maybe a diagnostic six clicks indicating something else or do you think it is just the locking mech that is faulty? I have done a little research but like always there are dozens of so called experts and all giving conflicting advice. I hope you can point me in the right direction and thanks again for the vid.
This is great. I’m trying to match what seal I need for my machine. Iv noticed a small leak the last couple of days. Iv checked the tray, the water feed valve. The pipe that feeds the drum and the pipe that goes to the pump. All seems ok, the leak is mainly at the front under the machine so I’m suspecting the door seal leaks. I saw the springs you mention when I was looking around in there. Looks simple to change. Can’t see any splits in the seal so could be a small pin hole somewhere?
Hi MrStreetboy, check the filter first before checking underneath to establish if it is the door seal and if you're sure our link will direct you to our web page for parts. For all your washing machine spares, visit bit.ly/1vhk6Zt
Hi, How do I buy the seal in the video? It matches the seal the I have taken out of my machine. I have now brought two seals that apparently fit the Hotpoint WDL520P Aquarius but sadly no luck, they also look different to the one in the video. (which I want)
Hi Andrew, we supply a range of seals and should be able to help, just follow the link to our website www.espares.co.uk/search/ma808pt1564/washing-machines/seals/hotpoint.
Thanks for the comments but we had better explain them a little more. You can still change the seal on all the models you list, but cannot remove the front panel as shown in this video on many newer models. For details of replacing seals 'through the door' viewers should watch this video: ua-cam.com/video/3IqArUKDLYE/v-deo.html
Hi Simone, if we are talking about the retaining band around the seal a flat blade screwdriver like in the video, the inner band will come off when you remove the seal.
Wonderful stuff My washing machine is doing its work as I type this message. Just under an hour but learned a lot about my washing machine. Thanks again guys !!
This video going to save me lots time and money thanks great stuff
Hi Harry, thanks for your comment. We're glad to hear our video is going to help you fix your washing machine yourself. Well done for repairing your appliance instead of replacing it!
Thank you! This combined with other two videos on UA-cam actually helped me with a. Ordering the right part, and b. replace my door seal. However my washing machine front didn’t come off so it was 10x difficult when I actually did the job.
Fantastic video as always, helped loads when my door seal came off of the drum. Had a plastic door seal on the outside though.
Hi Phil, glad you got it sorted and glad you enjoyed the video remember to keep watching.
Excellent video very well presented with clear concise instructions 👋
Hi, thanks so much for your comment here, it's great to here that you appreciate this video...hopefully it helps you to now replace the door seal on your washing machine. You can check out our range of replacement Hotpoint door seals here:
www.espares.co.uk/search/ma808pt1564/washing-machines/seals/hotpoint
Can i say with the help of this video what looked like a massive job was so easy....a BIG THANKYOU
Hi Keith, thank you for posting and glad the video helped.
My washer front was welded onto the sides so couldn’t get off but still a really easy job! Thanks!
Hi mattlamb8 , glad we could help.
Just gave it a go after finding pools of water on the kitchen floor after each wash. I ordered my replacement from eBay for £16. It looked a little different, but it went on. Its a little bit difficult to get the seal on to the drum so have some small clamps close by. Other than that a great video that helps out.
Hi Gareth, thank you for the comment.
A very informative and practical video - thank you very much
Hi Elaine Gulp, thank you for the post and glad the video helped.
The washing up liquid was key for install. Then take your time. Thank you
Hi, thanks for your comment here, glad our video was able to help you to replace the door seal yourself!
Great tutorial and easy to follow, thanks
Hi Karly, thank you for the nice comment and glad the video helped.
This was great, thank you very much. It took us a while, as we're not the best at this sort of thing and we did bang our heads against the wall at 08.12 when you said that on some machines it's not possible to remove the front panel. We thought we were doing something wrong at the beginning when we couldn't figure out how to remove it. But we are very grateful for this video and have bookmarked it for the next time.
Now, if you could just tell me where the long metal bit from the top of the machine, that we found when we closed everything up, is supposed to go........................... d'oh!!!
Hi Sara, glad the video helped, it does depend on the model whether the front comes off so you do need to work that out before you start, have you found where the missing piece goes yet? hopefully, you have retraced your steps to find out.
We've taken an executive decision to leave it out - it's not an essential part and I was frightening the cat with my swearing. Done a few washes now and no more mouldy smell, your video was a godsend.
Hi Sara, we understand that logic so as long as you are happy the machine is safe then well done on the repair.
Washing up liquid was the deal breaker for us. Struggled massively until we tried some fairy and then it all went together well.
Will this work with all brands of washing machines?
Hi Allen, the video is only for Hotpoint machines as fitting a door seal on another make may be similar but in most cases will not be the same, we do a few different videos on fitting door seals so have a look for your brand on our channel.
Hi and let me first say great vid simple, to the point and easy to follow so thanks for that.
Now my question, I have an Aquarius+ WML720 which has ceased to work and just gives six clicks of the door lock when I press the start button, it stopped half way through a wash cycle and since then just gives six clicks of the door locking mech.
Is this maybe a diagnostic six clicks indicating something else or do you think it is just the locking mech that is faulty?
I have done a little research but like always there are dozens of so called experts and all giving conflicting advice.
I hope you can point me in the right direction and thanks again for the vid.
This is great. I’m trying to match what seal I need for my machine. Iv noticed a small leak the last couple of days. Iv checked the tray, the water feed valve. The pipe that feeds the drum and the pipe that goes to the pump. All seems ok, the leak is mainly at the front under the machine so I’m suspecting the door seal leaks. I saw the springs you mention when I was looking around in there. Looks simple to change. Can’t see any splits in the seal so could be a small pin hole somewhere?
Hi MrStreetboy, check the filter first before checking underneath to establish if it is the door seal and if you're sure our link will direct you to our web page for parts. For all your washing machine spares, visit bit.ly/1vhk6Zt
Anyone who has done this successfully, I would congratulate you on your amazing achievement 🎊 🎉😂
This video also works for the washer/dryer variant but before you start, you’ll need a 300mm zip tie to hand
Hi Paolo, thank you for the comment.
Hi, How do I buy the seal in the video? It matches the seal the I have taken out of my machine. I have now brought two seals that apparently fit the Hotpoint WDL520P Aquarius but sadly no luck, they also look different to the one in the video. (which I want)
Hi Andrew, we supply a range of seals and should be able to help, just follow the link to our website www.espares.co.uk/search/ma808pt1564/washing-machines/seals/hotpoint.
Wouldn't it have been worthwhile mentioning cleaning out the filter behind that lower front panel, the one on the right hand side?
Such a shame this can't be done on newer models such as WML/WMF/WMD and other Hotpoints past 2010.
Thanks for the comments but we had better explain them a little more.
You can still change the seal on all the models you list, but cannot remove the front panel as shown in this video on many newer models.
For details of replacing seals 'through the door' viewers should watch this video: ua-cam.com/video/3IqArUKDLYE/v-deo.html
eSpares yeah sorry. I did just mean the front pannel. I didn't explain myself properly.
😊
I can't get to the retaining band on mine. I have a hotpoint wml 730 g.
Hi Simone, if we are talking about the retaining band around the seal a flat blade screwdriver like in the video, the inner band will come off when you remove the seal.
@@eSpares I thought the band comes off first?
Hi Simone, the outer band comes off first and use a flat blade, the inner one around the seal use a flat blade just like the video shows.
@@eSpares found and removed. i just need a new seal.
Hi Simone, this link is to door seal for Hotpoint www.espares.co.uk/search/ma808pt1564/washing-machines/seals/hotpoint
Hi, how do you replace the seal when the front panel doesn't come off?
Hi David, we have another video with a machine that the front doesn't come off ua-cam.com/video/3IqArUKDLYE/v-deo.html
That outer spring ......is impossible.
Hibogbrush999 , if you are still struggling ask a friend to help as 2 hands are better than one for the outer band.