Just watched this before I attempt mine. I'm really glad I have seen that its not as simple as just pulling the old out and putting the new in. This video is excellent.
All worked fine...the pain for me was the last spring to stretch out...I had to burn the spring to spring for easy insertion (cheated) but all tested working fine ... thanks so much for the video....❤
If you're reading this with a model WX842430B, yes this video will help. Just note two things: to take the front off you'll find the screws on the base of the machine. And after you remove the top of the machine there's a little plastic panel that comes out, take a photo before you remove it to make putting it back easier.
I got the beko washer dryer and having some difficulty getting the control panel off! It feel like it’s going to snap or break it will not click out of the middle even though all the screws are out. So having to replace the seal with the control panel on it literally will snap if I try and force it so not bothering as want to sell it. But needs a new door seal having loads of difficulty because the dryer lip keeps slipping off every time I move the drum back. So given up for this evening. 😩
Followed this step by step and was successful replacing the seal. Unfortunately I think the bearing is gone now (which probably led to the seal wear in the first place). Sigh..
I tried to do this today and failed, I think the machine is a newer version so the seal is not easily accessible. I've called out the repairman. Some you win, some you lose.
Theoretically it would be possible. But without access to the water tank from the front, very difficult. In my opinion, such attempts are a waste of time.
Not replacing the rubber but my outer spring just came off and cant seem to get it back on if i pull to hard the rubber comes off so i have to re seal it and try again but it doesnt work any tips?
When clipping the seal back on should the lips of the seal go underneath and on top I can't seem to make them connect together. Common sense says yes but it's really hard so I'm wondering if I have the wfong size seal? Thanksn
I managed it!@@k-nemo Thank you so much for this video. It's been so helpful. Amazing. You weren't wrong about the springs not being easy to get back on! haha plenty of swearing while I was struggling with them but we got there using a screw-driver to ease it in place. Thanks again. Legendary video.
Just watched this before I attempt mine. I'm really glad I have seen that its not as simple as just pulling the old out and putting the new in.
This video is excellent.
Excellent demonstration. Really helped when you showed the tricky bits were genuinely tricky. Thank you.
Really helpful. No annoying talking either.
Thanks a lot :)
absolutely superb, thanks, my machine had something wedged between the inner and outer drum, stripped it down and got the debris out, thanks 👍👍👍👍👍👍👍
All worked fine...the pain for me was the last spring to stretch out...I had to burn the spring to spring for easy insertion (cheated) but all tested working fine ... thanks so much for the video....❤
Glad I could help!
Did you just apply heat? I been at it for over an hour. Horrible spring
Thenk you very Mach for those lessons it save me a lots of time
I'm pleased to have been of assistance!
Thanks for all. I have a Beko and it's exactly same step. Screws are different but will be ok.
Thanks for all of dude
Thank you so much😊 you made my day😊
😊
Great Video, helped with changing my seal this afternoon and worked perfect, thank you
If you're reading this with a model WX842430B, yes this video will help. Just note two things: to take the front off you'll find the screws on the base of the machine. And after you remove the top of the machine there's a little plastic panel that comes out, take a photo before you remove it to make putting it back easier.
I got the beko washer dryer and having some difficulty getting the control panel off!
It feel like it’s going to snap or break it will not click out of the middle even though all the screws are out.
So having to replace the seal with the control panel on it literally will snap if I try and force it so not bothering as want to sell it.
But needs a new door seal having loads of difficulty because the dryer lip keeps slipping off every time I move the drum back.
So given up for this evening. 😩
if you have locate the hole cant be repaired just with a simple repair kit for tyres?
I don't think it will work. The tire works differently. The tire has high pressure inside.
One of the best lesson 👍👍
Thank you!
Thanks for this video. Because of it I was able to follow and change mine
Glad to hear I helped!
Followed this step by step and was successful replacing the seal. Unfortunately I think the bearing is gone now (which probably led to the seal wear in the first place). Sigh..
I tried to do this today and failed, I think the machine is a newer version so the seal is not easily accessible. I've called out the repairman. Some you win, some you lose.
Top, thank you 👍
Thank you too!
Cheers that was very clear and I managed it myself thanks
No problem 👍
ما شاء الله تبارك الرحمن الله يبارك في عمرك ويرزقك من حيث لا تحتسب
شكرًا
De nada
Such a good video. Thank you so much!
You are so welcome!
brilliant video
Is it possible to change the rubber without dissassembly the front of the washer?
Theoretically it would be possible. But without access to the water tank from the front, very difficult. In my opinion, such attempts are a waste of time.
@@k-nemoim authorized tehnician for Beko and it is possible to change it without removing anything else just a rubber.
Yes
Sorted my machine out many thanks!
You're welcome!
Super brother thank you so much 😊😊😊❤❤❤🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
I’ve got a showering leak underneath like a little waterfall. Does this mean I need to change seal?? It’s seeping
Possibility
Trying to put the spring wire back on the outside of the seal, all it does is pull the seal off
Maybe the seal wasn't in the right place?
Brilliant thanks
Not replacing the rubber but my outer spring just came off and cant seem to get it back on if i pull to hard the rubber comes off so i have to re seal it and try again but it doesnt work any tips?
Maybe ask for help? It might be easier with 4 hands.
Thanks
Thank you!🥰
When clipping the seal back on should the lips of the seal go underneath and on top I can't seem to make them connect together. Common sense says yes but it's really hard so I'm wondering if I have the wfong size seal? Thanksn
It's hard for me to advise you if I can't see it. Compare with the old seal.
ty so mach
Thanks!
Welcome!
You can replace it without taking off front panel and other stuff
Is it best to heat up the spring before putting it on?
No.
Thank you
Thanks.
Thanks
thank you!
You're welcome!
Danke!
Thanks!
Somehow my five year pushed the whole sealing into the washer and turned it on… you saved me a lot of money cause of your video. Worked perfectly!
Thnx soooo much 🤗🤗
Thanks😊
Gracias por tu ayuda👍👍👍
Ah perfect mate! This video was a great help. Can't fault you! Have a coffee on me as a thanks £ 😉
thanks
Welcome
Where to buy the door seal?any website?
There are many stores around the world. Use the search engine.
👍👍
🙏🏻👍❤️
Washing machine having a wee
Dacă se alimentează cu apă dar nu avrte ce este de facut
Во это мастер 🤦🏻♂️😡все грязные детали поставил назад 😂
Stupid idea. It’s take 2 minutes to change seal .
great video! well here goes! wish me luck haha
I wish you luck and patience when installing the springs 06:57 and 09:02. It's not easy but I did it even though I'm not very strong. 👍
I managed it!@@k-nemo Thank you so much for this video. It's been so helpful. Amazing. You weren't wrong about the springs not being easy to get back on! haha plenty of swearing while I was struggling with them but we got there using a screw-driver to ease it in place. Thanks again. Legendary video.
Well done!@@EmilieWelch-cm7qz
💪
Thanks
Thank you for watching and supporting!😊