Been dealing with a leak and discovered $5.33 in change, a broken pen case, a rivot, and a toothpick in the drain pump. Replaced door bellows a couple months ago and worked for a while. I never realized there is a filter in the drain pump until i seen a video for it but this video adds more trouble shooting techniques. thank you for sharing this great information. Now on to the filter and hose checks.
Thanks so much. Callout in London England is the same cost as a new machine - but what about the environmental cost of un-necessarily replacing a good machine? Thanks for sharing your knowledge.
Mine leaks during the rinse cycle only on my Maytag 2000 series front loading washing machine, but only from the center of the top of the bottom panel. It starts 10 minutes into the rapid wash cycle, so when the washing machine shows 18 minutes left of the rapid wash cycle and continues leaking until there are 14 minutes left of the cycle, then stops. It leaks enough to soak 3/4 of a bath towel that is under the bottom panel to catch it. Any ideas? Thank you for your wealth of knowledge.
Absolutely the best and easiest explained repair video I have ever seen anywhere. Precise and well spoken with no Led Zeppelin music playing in the background and explanation was about the problem and not about making you a movie star. Thanks for taking the time and for the great explanation.
You can add "Split on the th drain hose near the drain pump" to the list. It will leak not quite as fast as the water fills (a lot) when a cycle begins. I found this out on ours. I just found the split as I was checking the things that you recommended. Thanks, Great video!
Lovely video. You gave me the knowledge and confidence to troubleshoot my washer. I found the hose connecting the drum was loose. All i had to do was reconnect it and tighten the clip. Voila!
A small black rubber tube near the bottom and just inside the rear access panel came detached from whatever it was supposed to be attached to ( I am not certain what it was) on our LG frontload washing machine and flooded our laundry room, hall, kitchen, and basement. Yes, one small detached rubber tube caused all of that. I did not find any clamp, so I reattached the tube (to whatever it is) and taped it for extra security.
I learned a great deal from you, but my leak was not in any of those area. Its coming from one of the three hole that connected to the detergent basket.
Thank for you this informative and easily to understand video. I’m going to take some time today to look over my washer and figure out why it’s leaking. I’m a single woman and don’t have many people I can call for help with things like these.
Great Video. I’m finding water inside my whirlpool front load machine from one day to the next without any usage. I’m suspecting it’s the inlet valve letting water in after the cycles, but how can I be sure? Thanks.
Mine is leaking either at the front or middle of the washers left side(looking at it) ( or the floor COULD be slanted and its acctualy the back but i doubt it) Im betting either something is stuck in the softener adding place hoe (which is likely BUT the washer start usualy leaking from the very begining of the wash( and im assuming softener is added only from the middle ti the end of cycle and so the water gets there) so unsure. Lemme come back tomorow or tuesday and update what i discovered after taking off the front ( cause right now i gotta wash them clothes 😂) Fyi its not leaking A LOT. Id say a 1/4 of a glass of water, mostly at the beginning of the cycle. I've been know to sometimes most likely overload the machine so i hope its not the center damage.
That was a fantastic video. Thank you very much. And because you are taking care of your customers so much, I will be sure to check your catalog for the parts that I need.
Thank you very much! You helped me fix my Whirlpool. It was leaking from the detergent dispenser at the top because there was a blockage in the dispenser hose. This video is awesome.
Excellent preview of what I need to do to fix the leak that just started on our LG front load washer. I will follow your steps one by one. Thank you sir.
I tried pouring water in my detergant area to fill the drain pump back up. But i noticed as i did this i saw water leaking out from right under the washing machine right below where the drain pump is. Could you tell me which problem is more likely?
I have 3 cats and enough cat hair stuck in the bellows and drain holes from tub to make a 4th. Eww. No one warns of that. I’m hoping since mucking it out that will help my water issue which is water seeping out between bottom of tub section and above bottom panel whirlpool Duet front loader.
I would take the top off and inspect the hoses going to the dispenser. During the rinse cycle water is also being diverted to the fabric softener section of the housing. That could be why only seeing it during the rinse.
My washing machine drum is filling up with water once in about every 2 days. I removed the water inlets and apparently there is no dripping from them. Yet, I left them in bowls and I am waiting to see if they are the cause of the problem. If they are not, what other parts might be the reason?
@@dianaasare4895 After keeping both water inlets in bowls for about 2 days, I could see the faulty one. I replaced it with another inlet and had no problem since then.
i tried to drop the main drain hose i didnt see any holes or feel any. but i couldnt get it all the way out. is there any other reason why it would dump water on the rinse/drain cycle? maybe the drum.
@@redsed1565 Sorry about that! I just replaced the inlet assembly. It was pretty easy actually. This was a long time ago but I still have the washer and it doesn't leak so I guess I fixed it. lol But mine wasn't leaking in the tub it was leaking on the floor. You may have a different issue.
This video is 1,000,000 times more helpful than the LG web site.
Honestly
but the background music sucked so bad I never watched the whole video
Thank god for professionals willing to share their knowledge. I have to fix my sisters washer and this is definitely great information.
Ong, woulda thrown it away
Been dealing with a leak and discovered $5.33 in change, a broken pen case, a rivot, and a toothpick in the drain pump. Replaced door bellows a couple months ago and worked for a while. I never realized there is a filter in the drain pump until i seen a video for it but this video adds more trouble shooting techniques. thank you for sharing this great information. Now on to the filter and hose checks.
Thanks so much. Callout in London England is the same cost as a new machine - but what about the environmental cost of un-necessarily replacing a good machine? Thanks for sharing your knowledge.
Mine leaks during the rinse cycle only on my Maytag 2000 series front loading washing machine, but only from the center of the top of the bottom panel. It starts 10 minutes into the rapid wash cycle, so when the washing machine shows 18 minutes left of the rapid wash cycle and continues leaking until there are 14 minutes left of the cycle, then stops. It leaks enough to soak 3/4 of a bath towel that is under the bottom panel to catch it. Any ideas? Thank you for your wealth of knowledge.
Absolutely the best and easiest explained repair video I have ever seen anywhere. Precise and well spoken with no Led Zeppelin music playing in the background and explanation was about the problem and not about making you a movie star. Thanks for taking the time and for the great explanation.
Thank you Parts Select! You saved me hundreds on the dryer, now my washer is leaking and I'm back! THIS is what technology should be used for!
You can add "Split on the th drain hose near the drain pump" to the list. It will leak not quite as fast as the water fills (a lot) when a cycle begins. I found this out on ours. I just found the split as I was checking the things that you recommended. Thanks, Great video!
Lovely video. You gave me the knowledge and confidence to troubleshoot my washer. I found the hose connecting the drum was loose. All i had to do was reconnect it and tighten the clip. Voila!
Very very informative I learned a lot also I have no idea what I’m doing but thank you for the information
Thank you so much I learned a lot of info and u saved me at least 200 for the repairs thank you
You're awesome! I truly appreciate your help. I send blessings to ALL!
A small black rubber tube near the bottom and just inside the rear access panel came detached from whatever it was supposed to be attached to ( I am not certain what it was) on our LG frontload washing machine and flooded our laundry room, hall, kitchen, and basement. Yes, one small detached rubber tube caused all of that. I did not find any clamp, so I reattached the tube (to whatever it is) and taped it for extra security.
That's the emergency drain tube I believe and on trying to empty mine, I pulled the whole tube out 😢. Now I'm trying to figure how to replace it
@@onwubikochisom9673 The drain tube is in the front. The tube that came lose on my washing machine was in the back.
Very good video. I’ve spent more time repairing our POS Maytag front loader in 2 years than I have in 12 years with our LGs.
So i guess this front load technology is crap vs the old tub style?
Pretty much so, I’m afraid. Front loader is a very delicate piece of equipment compared to the ‘old-fashioned’ top-loader with an agitator.
By far the best troubleshooting video for washing machines.
very educative. Thank you regards
WHAT ABOUT A LEAKING FILL VALVE/SOLENID? HOW TO FIX?
I learned a great deal from you, but my leak was not in any of those area. Its coming from one of the three hole that connected to the detergent basket.
Thank for you this informative and easily to understand video. I’m going to take some time today to look over my washer and figure out why it’s leaking. I’m a single woman and don’t have many people I can call for help with things like these.
Great Video. I’m finding water inside my whirlpool front load machine from one day to the next without any usage. I’m suspecting it’s the inlet valve letting water in after the cycles, but how can I be sure? Thanks.
Boy, I feel empowered, now that I know whats it all aboot! Thanks
Sir I truly appreciate your work. Thk you 🙏
Seriously I’m buying a top loader
You are a legend mate thank you
Thanks mate, that was very helpful 😁
Wow, very upfront, to the point and very knowledgeable. And explains so I can understand
Thank you!
Mine is leaking either at the front or middle of the washers left side(looking at it) ( or the floor COULD be slanted and its acctualy the back but i doubt it)
Im betting either something is stuck in the softener adding place hoe (which is likely BUT the washer start usualy leaking from the very begining of the wash( and im assuming softener is added only from the middle ti the end of cycle and so the water gets there) so unsure. Lemme come back tomorow or tuesday and update what i discovered after taking off the front ( cause right now i gotta wash them clothes 😂)
Fyi its not leaking A LOT. Id say a 1/4 of a glass of water, mostly at the beginning of the cycle. I've been know to sometimes most likely overload the machine so i hope its not the center damage.
So buy a top loader. Got it
Omg your an angel. My machine was leaking and turns out it was the dispenser hose just a bit popped outta place! Thank you for your knowledge😊!!
Thank you for this video, great trouble shoot guide
Thanks Steve Ash!
That was a fantastic video. Thank you very much. And because you are taking care of your customers so much, I will be sure to check your catalog for the parts that I need.
I have a Maytag with a leak. I have watched many Video on the subject. This is the by far best video have seen.
This is a great video. Thank you.
Thanks mate, this was an incredibly helpful video that lead to me identifying the problem in about half an hour! You're a legend
My washer was off balance and the door opened leaving the plunger in the lock. How do I remove the plunger so that I can reattach to the door?
switch off and wait 1 minute
Very nice video
Loved the step by step and suggestions for if the screws, etc were located in different parts. Worked for me. Thank you so much!!!
Vent leaking checked plunger in vent hose little dirty cleaned worked for a couple loads leaking again thinking of pulling pump and possibly replacing
Thank you very much! You helped me fix my Whirlpool. It was leaking from the detergent dispenser at the top because there was a blockage in the dispenser hose. This video is awesome.
Good day my friend, I changed the bellow and it still leaks. If that retention is stiff and corroded could that be it?
This is the exact washer I have and it's pouting water out the bottom, ty very much for sharing this
This video is so useful. Great knowledge shared!! I am fed up of waiting for the technician to come fix the leak, I'm going to do it myself
Excellent preview of what I need to do to fix the leak that just started on our LG front load washer. I will follow your steps one by one. Thank you sir.
I’ve got A kenmore steam ast2 washer with some soapy water discharge from the vent at the rear. Is this repairable?
I tried pouring water in my detergant area to fill the drain pump back up. But i noticed as i did this i saw water leaking out from right under the washing machine right below where the drain pump is. Could you tell me which problem is more likely?
I have 3 cats and enough cat hair stuck in the bellows and drain holes from tub to make a 4th. Eww. No one warns of that.
I’m hoping since mucking it out that will help my water issue which is water seeping out between bottom of tub section and above bottom panel whirlpool Duet front loader.
I believe yr sharing of water leak of front load washing machine is certainly helpful. Many thanks
My washer is still leaking BIG PROBLEM!
Thank you so much, I was missing the most simplest thing and now I got it fixed
Everytime the machine is rinsing the water start leaking..how to fix it
Excellent video!
my washer leaks from the bottom during the rinse cycle only...no issue during the wash cycle. Your thoughts, please?
I would take the top off and inspect the hoses going to the dispenser. During the rinse cycle water is also being diverted to the fabric softener section of the housing. That could be why only seeing it during the rinse.
I remember my dad finding a necklace in the drain pump filter on a used washer we had bought.
Can somebody help.me.here I have a problem.about the seimens washing machine leaking hope somebody can help me
Thanks for the info, found a coin and damaged the bellow.
Did I mess a part? Can’t pumps leak when they go bad?
Very good video
Thanks,that was very good knowledge. But I have a different kind of problem.
Thank you. Now I gonna fix my washer.
My washing machine drum is filling up with water once in about every 2 days. I removed the water inlets and apparently there is no dripping from them. Yet, I left them in bowls and I am waiting to see if they are the cause of the problem. If they are not, what other parts might be the reason?
I realize this comment is a few months back,I am currently experiencing this problem, I hope someone can explain this problem.
@@dianaasare4895 After keeping both water inlets in bowls for about 2 days, I could see the faulty one. I replaced it with another inlet and had no problem since then.
@@atfnik5348 thank you.
@@atfnik5348 How is the hose the problem? Surely its a leaking valve or solenoid issue?
@@redsed1565 yes, the reason was a faulty inlet, after replacing it I had no issues since then.
I'm in my 3rd door boot seal😒 Electrolux 😑
thank you
i tried to drop the main drain hose i didnt see any holes or feel any. but i couldnt get it all the way out. is there any other reason why it would dump water on the rinse/drain cycle?
maybe the drum.
very helpful! Thanks much!
Titles comes in the middle of the video so we can't see it properly.
you got to show how to open top and front console step by step TK
Very informative. Thank you for sharing your knowledge.
Great Video and very helpful information.
Just great.
My bathroom is like an ocean 😆😳
Bro fax
lol. Wonder what that small item was in the rubber hose at the top! lol
Water valves also cause leaks. I've got a cold water inlet that is leaking. Also an easy fix.
yes I have the same issue which he did not cover. Its filling up in the drum when the machine is off. Can you please tell me how to fix this issue?
Gee whiz, without seeing it I would have no idea. Google knows, I'm sure.
@@robsaxepga ha ha I think I confused you! My issue is from the water inlet valve leaking into the drum when machine is off. How did u fix ur valve?
@@redsed1565 Sorry about that! I just replaced the inlet assembly. It was pretty easy actually. This was a long time ago but I still have the washer and it doesn't leak so I guess I fixed it. lol But mine wasn't leaking in the tub it was leaking on the floor. You may have a different issue.
Great information, Thank you
Amazing. Real professional
Same with d situation here
Best explanation ever. Thanks
Thanks for the info
This is a GREAT tutorial- thank you for putting this together!
Thank you very much 👍
Thanks!!!!
Thanks Mate.
⚾️
Thank You for the great details.
Too complicated….
Excellent .Thank you.
Great video!
Thank you very much.
Thank you!
I’m gonna
Very informative
Great video! Thank you kind sir!
Hi Steve.
Whoa. Now that was a really detailed “how to” post. Thank you!
lots of great content, thank you!
You saved me a lot thank you so much
Excellent video!
You saved my washer thank you
You're very welcome!
thank you, Sir!