Love Godox for what they have done, on that note the main issue(s) are if you're using non Godox strobes you can not control the lights even with the firmware updates. All you have is a trigger it's looking like Yongnuo is the only flash controller that will work with your mix of light.
I can remotely control my Canon Speedlite if connected to a X1-C. I can change settings from a V860 set as a master or a trigger. So far it’s all connected together and working fine.
Hi Manuel, very in-depth video. Would you have any suggestions as to why the XProS would not work with a Sony A6000? I am trying to trigger a strobe using the X1RS receiver with XProS but nothing happens. Wondering if there are settings on the Sony or things to look for on the camera that might indicate if it's working properly (besides the flash going off)
very helpful tips. Can you tell if the Xpro-s would work on Sony A100. the flash I would be using is V860iis. I know Sony A100 does have the wireless feature but wondering if it would work with the XPro-S to transmit the signal to the flash.
That’s a very good question. I use a a7III and it works great. I know that my camera wasn’t listed on the Godox website when I purchased the unit. Maybe another viewer can help?
4 роки тому
Ttl mode underexposing wildly, weird because if my v1 flash is on camera the ttl works well, off camera ttl is basically unusable
I don’t know if anyone will see this or even respond it but please I need help. I will be buying a Sony in few months and I needed a flash speedlight so I bought the Godox TT350s but I have a Canon for now. With which trigger can I make it work? Do I need, for example, the X1T (or X2T) Sony for the flash and X Pro Canon for the camera? Or just X1T (X2T) Canon connected to the camera and the trigger connects wirelessly to the Sony Flash?
Hi, I did a little research and the AD200 should work with the X1T-S for sure. I also saw some mention of the XPro-S triggering the AD200. I sometimes have a weird issue where I need to circle my Godox flash from slave to master back to slave to establish a good connection. I show how later in the video. Hope this will help.
Very good question. I would imagine that it would work as the Xpro-S send the right signal for the V860II flash series. I can trigger my X1-C with my V860II-S. Maybe another viewer can answer.
I don’t know if anyone will see this or even respond it but please I need help. I will be buying a Sony in few months and I needed a flash speedlight so I bought the Godox TT350s but I have a Canon for now. With which trigger can I make it work? Do I need, for example, the X1T (or X2T) Sony for the flash and X Pro Canon for the camera? Or just X1T (X2T) Canon connected to the camera and the trigger connects wirelessly to the Sony Flash?
Love Godox for what they have done, on that note the main issue(s) are
if you're using non Godox strobes you can not control the lights even
with the firmware updates. All you have is a trigger it's looking like
Yongnuo is the only flash controller that will work with your mix of
light.
I can remotely control my Canon Speedlite if connected to a X1-C. I can change settings from a V860 set as a master or a trigger. So far it’s all connected together and working fine.
Hi does the receiver work with sony flashes ? same as you did with the canon flash ?
Hi Manuel, very in-depth video.
Would you have any suggestions as to why the XProS would not work with a Sony A6000? I am trying to trigger a strobe using the X1RS receiver with XProS but nothing happens. Wondering if there are settings on the Sony or things to look for on the camera that might indicate if it's working properly (besides the flash going off)
i have an issue with Xpro S , it almost always changes my WB , is there any fix to that ?
very helpful tips. Can you tell if the Xpro-s would work on Sony A100. the flash I would be using is V860iis. I know Sony A100 does have the wireless feature but wondering if it would work with the XPro-S to transmit the signal to the flash.
That’s a very good question. I use a a7III and it works great. I know that my camera wasn’t listed on the Godox website when I purchased the unit. Maybe another viewer can help?
Ttl mode underexposing wildly, weird because if my v1 flash is on camera the ttl works well, off camera ttl is basically unusable
I don’t know if anyone will see this or even respond it but please I need help.
I will be buying a Sony in few months and I needed a flash speedlight so I bought the Godox TT350s but I have a Canon for now.
With which trigger can I make it work?
Do I need, for example, the X1T (or X2T) Sony for the flash and X Pro Canon for the camera? Or just X1T (X2T) Canon connected to the camera and the trigger connects wirelessly to the Sony Flash?
I could not make my GOdox AD200 and Xpro-s work together. Turned on the wireless button on AD200 but still nothing
Hi, I did a little research and the AD200 should work with the X1T-S for sure. I also saw some mention of the XPro-S triggering the AD200. I sometimes have a weird issue where I need to circle my Godox flash from slave to master back to slave to establish a good connection. I show how later in the video. Hope this will help.
@@manuelmartelphotography Was able to solved it already. It worked after resetting
Hello! Can I use this with sony a7riv?
Hi, I can’t say for sure but it works flawless with my a7III. Maybe another viewer might be some to answer.
Will the XPRO-S work on aA7III with a Godox Flash for Nikon or for Canon that has an embedded receiver like V860IIN or V860IIC?
Very good question. I would imagine that it would work as the Xpro-S send the right signal for the V860II flash series. I can trigger my X1-C with my V860II-S. Maybe another viewer can answer.
I found another post on another website confirming it should work. Will know soon enough as XPro-S is coming tomorrow.
I don’t know if anyone will see this or even respond it but please I need help.
I will be buying a Sony in few months and I needed a flash speedlight so I bought the Godox TT350s but I have a Canon for now.
With which trigger can I make it work?
Do I need, for example, the X1T (or X2T) Sony for the flash and X Pro Canon for the camera? Or just X1T (X2T) Canon connected to the camera and the trigger connects wirelessly to the Sony Flash?