How to Choose the Right Wick Size for Your Candles | Our Wick Testing Guide | CandleScience

Поділитися
Вставка
  • Опубліковано 6 сер 2024
  • One of the most important aspects of candle making is learning how to find the right wick size for your candle. A properly wicked candle burns cleaner and gives reliable burn times and fragrance throw. Watch this video guide to learn the signs of a properly wicked candle.
    Visit CandleScience.com for additional helpful articles, guides, and supplies: www.candlescience.com/
    Shop Fragrance Oils: www.candlescience.com/fragran...
    Shop Soy Candle Wax: www.candlescience.com/wax/soy...
    0:00 Introduction - How to choose right wick size
    0:12 Ideal wick size demonstration
    0:33 Under-wicked candle example
    0:50 Over-wicked candle example
    1:38 Wick size
    2:33 Conclusion - Check out Candlescience.com
  • Навчання та стиль

КОМЕНТАРІ • 166

  • @QueenCoraGDDS
    @QueenCoraGDDS 9 місяців тому +8

    Not sure why every other video is a 20 min explanation. This is all that’s needed! The diameter rule and then wick observation. Ty! 😊

  • @SeerSeekingTruth
    @SeerSeekingTruth 18 днів тому

    I absolutely love that you just get straight to the point and leave out unnecessary chit chat while adding key points people are looking for along with a live demonstration. Great job!!!

  • @candlesbypurplerose1010
    @candlesbypurplerose1010 Рік тому +6

    What I wish is more guidance. Like maybe a table chart that shows different waxes. Different diameter jars, different fragrance loaf and then the recommendation for wick type and size. I can understand the need for testing but do not see why there cannot be more guidance. I’m 6 months into my candle journey. That having been said, fixed tops, fixed holes, appearance and cold and hot throw, colors and additional items
    BUT the wick size is still iffy, I literally have under and over wicked candles with the occasional win. It’s been terribly expensive and time consuming. At this point the joy out of this hobby has been in opening up my amazing fragrances and the pretty molds. Thank you for a place to vent. Subscribed- let’s see what I learn.

    • @candlescience
      @candlescience  Рік тому +6

      Unfortunately, because there are so many factors that affect how a candle will burn, there is not a recipe or process that will work for each maker each time. The wax and fragrance load affect how the wick burns but so does the particular type of fragrance. For example, a candle with 464 wax in a straight sided tumbler and a CD 18 wick will be great for many scents with an 8% fragrance load. If you're using Citronella, a light scent in terms of density, you may need to wick down and if you are using Dulce de Leche, you may need to wick up or lower the load for that one. There is not a super comprehensive way to put this information onto the site as different makers will have different results. The Wick Guide lists all of the waxes we carry along with wick recommendations for all of the diameters for the jars we stock. To get these suggestions, the wicks were burned in candles with a 7.5% fragrance load as well as some dye. Because the type of fragrance or dye can change results, testing will still need to be done and a burn test is the only way to see for sure whether you may need to wick up or down. I will test each new scent I try, even if it is in the same jars with the same wicks I've been using. It is absolutely the most time consuming, frustrating, and costly part of the process but if you will be selling candles, it's good to be sure how they burn! It can be discouraging for sure but once you've got your process down, it's smooth sailing. If you run into any issues, please feel free to reach out on social or at support@candlescience.com with any images or video of the candles and we'd be happy to see if we can provide some more specific feedback as well!

  • @thecandlejourney2500
    @thecandlejourney2500 3 роки тому +26

    Spot on 👏 Super straight to the point and easy to understand. Thank you!

    • @kirishima4430
      @kirishima4430 3 роки тому

      Appreciate Video clip! Forgive me for butting in, I would appreciate your thoughts. Have you thought about - Honulian Wiffy Remover (do a search on google)? It is a smashing one of a kind guide for making money as a candle maker minus the hard work. Ive heard some amazing things about it and my close friend Aubrey finally got cool success with it.

  • @hannahkimmel4382
    @hannahkimmel4382 3 роки тому

    Helpful video! Thank you!

  • @shunwilliams6180
    @shunwilliams6180 4 роки тому +1

    So helpful for this video thank you so much

  • @Hout688
    @Hout688 4 роки тому +3

    Thnkx for this important informations ❤

  • @sonicamy4518
    @sonicamy4518 4 роки тому

    Very informative!

  • @melissah170
    @melissah170 Рік тому +1

    This is such a helpful video! I was literally eyeing one of the American Home candles that has soot on the glass and gets hot to the touch comparing it to my Bath&Body Works candles. Thank you so, so, so much for this video! I'm starting to understand candles and proper care for candles much better. 😊

    • @candlescience
      @candlescience  Рік тому +1

      I'm so glad it was helpful! If you ever have any questions about anything, please just let us know!

  • @sgnotlewis
    @sgnotlewis 8 місяців тому

    I started by watching the more recent videos till I finally watched this one. Your on-camera presence is so much more natural and confident now. Congrats!

    • @candlescience
      @candlescience  8 місяців тому

      Ah thank you so much! The old Dana, who is she? 😅

  • @squarepeg9484
    @squarepeg9484 3 роки тому +3

    This is so very helpful, thank you!

    • @Valentina_-lw9ui
      @Valentina_-lw9ui 3 роки тому

      Excellent Video! Excuse me for butting in, I would love your thoughts. Have you thought about - Honulian Wiffy Remover (Sure I saw it on Google)? It is a smashing exclusive product for making money as a candle maker without the hard work. Ive heard some incredible things about it and my good mate called Gray after many years got astronomical success with it.

    • @franciscal1782
      @franciscal1782 3 роки тому

      Cheers for the Video clip! Sorry for the intrusion, I am interested in your thoughts. Have you considered - Honulian Wiffy Remover (do a google search)? It is a great one off product for making money as a candle maker minus the normal expense. Ive heard some unbelievable things about it and my work buddy after a lifetime of fighting got astronomical results with it.

  • @gingersweeney7071
    @gingersweeney7071 3 роки тому

    Thanks so much!

  • @chaayahyasharahla8444
    @chaayahyasharahla8444 2 роки тому

    Love this thank you 5 stars🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾

    • @candlescience
      @candlescience  2 роки тому

      Ahh thank you! We're so glad it was helpful!

  • @LittleYoki
    @LittleYoki Місяць тому

    I like wood you get a video that just tells you the information you’re looking for. The last video I watched the girl was explaining what a wick was

  • @shunwilliams6180
    @shunwilliams6180 4 роки тому

    Great video thank you so much 🌹♥️🌹

    • @franciscal1782
      @franciscal1782 3 роки тому

      Cheers for the Video clip! Sorry for the intrusion, I am interested in your thoughts. Have you considered - Honulian Wiffy Remover (do a google search)? It is a great one off product for making money as a candle maker minus the normal expense. Ive heard some unbelievable things about it and my work buddy after a lifetime of fighting got astronomical results with it.

  • @CarmenRodriguez-rj6my
    @CarmenRodriguez-rj6my Рік тому +1

    Hi! ThankU! 🙏
    This is the easiest and well explained video for a beginner like me. So many videos not getting to the point…finding yours made my day 😊

    • @candlescience
      @candlescience  Рік тому +1

      I'm so glad it was helpful! If you ever have any questions about anything, please just let us know!

    • @CarmenRodriguez-rj6my
      @CarmenRodriguez-rj6my Рік тому

      @@candlescience I will take your helping offer, ThankU 😊
      In your experience, I will only use cristal and tin jars 2 and 3 inches wide. As they don’t sell ECO brand in my country, I will have to import them. Can you help me guiding which ECO series you suggest to buy for these? The ones that I have been using (not known brand) end like the first example, and since ECO come in 100,s!? 🤷‍♀️

    • @candlescience
      @candlescience  Рік тому

      I'd be happy to suggest some ECO wicks to test with! May I ask which wax you'll be working with? The wicks you'll need will mainly depend on the diameter of your containers and the type of wax you'll be using, though things like fragrance, dye, and container material can all affect how the wick will burn.

    • @CarmenRodriguez-rj6my
      @CarmenRodriguez-rj6my Рік тому

      @@candlescience 😢😭 wicks are hard to work with, no matter how beautiful or nice smell you put in a candle… 🫤
      Won’t take your time, too many things to consider 🤷‍♀️ but I’m thankful for your helping attitude, have a great night 🥰

  • @CamettScents
    @CamettScents 2 роки тому

    Very nice jar on

  • @shariceboykin9951
    @shariceboykin9951 2 роки тому

    Very helpful

    • @candlescience
      @candlescience  2 роки тому

      We're glad to hear that! If you ever have any questions, just let us know!

  • @justdanie7613
    @justdanie7613 3 роки тому +2

    I'm using 464 wax in your 11oz tumblers, and CD14 wick. the wick pool was way too deep, but the guide on the website says I should be using a CD18

  • @hiecelia
    @hiecelia 3 роки тому +2

    Per this video that jar is best with the CD 6 or the CD 8? I have that same jar and the wick guide says CD8 so I bought those but now I don’t know because I think this video says CD 6 is the way to go. ??

  • @karenholder5847
    @karenholder5847 2 роки тому +2

    Very informative video and straight to the point. My question is, should I suggest to the user of my candles, their first burn must be over 2 hours?

    • @candlescience
      @candlescience  2 роки тому +1

      Typically, a 2-4 hour first burn works well! If a candle is burned for a very short amount of time initially, it may struggle to form a full melt pool on subsequent burns as the wick may begin to tunnel. Having a good melt pool on the first burn helps the user get the most out of their candle!

    • @karenholder5847
      @karenholder5847 2 роки тому +1

      @@candlescience Much thanks.

  • @carolacarola6137
    @carolacarola6137 3 роки тому +2

    I always thought that flickering candle was the ghosts, when I was younger. Now I know it was a wick😊

  • @sylviechalifour7520
    @sylviechalifour7520 3 роки тому

    So with soya wax FO and color is the eco better or htp

  • @iluvdramarock
    @iluvdramarock 3 роки тому +4

    I love those label. It is helpful to know what you use. Where can I find? Or do I have to create my own, just wondering

    • @candlescience
      @candlescience  3 роки тому +4

      These are blank address labels from Avery that we customize and print ourselves. 😃

    • @iluvdramarock
      @iluvdramarock 3 роки тому +2

      @@candlescience that awesome need to create one for me. 😊

  • @user-jh8bw3pc4z
    @user-jh8bw3pc4z 4 роки тому +4

    Can you create the same video with explanation wicks in metal tins 2 oz. How should looks candle after 1 hour, 2 hour. Is wax in tin should be completely melted?

    • @candlescience
      @candlescience  4 роки тому +3

      Hi Elena! The information in the video will apply to candles of all sizes. A very small size candle like a 2oz tin can be a little trickier when you're wick testing, but you should definitely be getting a full melt pool within 2 hours.

  • @sinfullheart37
    @sinfullheart37 3 роки тому +1

    I was told to not have a full melt pool on the first burn but only on the second or third... this doesn’t match what you guys say and you guys are candle gods... please help... 464 wax

  • @photina78
    @photina78 2 роки тому +3

    I agree that the candle on the left is underwicked & the candle on the right is overwicked. But it seems to me the candle in the middle is overwicked too because I was taught, by pro candle makers, that if the melt pool reaches the sides of the jar by the end of the first burn session, the candle will burn too hot by the time it gets to the bottom of the jar. So I was taught that the melt pool shouldn't touch the sides of the jar until the end of the third burn session. Also, a 1/2" deep melt pool seems too deep for the first burn session. That's how I wicked my candles & they worked very well & didn't overheat. They didn't tunnel, I just had some hangup until the 3rd or 4th burn session would start melting the wax off the sizes of the jar so they'd be clean soon enough as the flame got lower in the jar. Some of my candles, like an orb shaped Ivy bowl & the 8 oz tureen, would tunnel down for a few burn sessions & then the flame would clean all the wax off the sides. I never had any problems with drowning wicks or mushrooms or soot when I wicked my candles to not make a full melt pool till the third burn session. So I was very surprised when I heard Lone Star, & now Candle Science, say you need to get a full melt pool by the end of the first burn session. I'd love to see how that middle candle is burning by the end of the third burn session. I wouldn't be surprised if the melt pool was as deep as the bottom of the jar. I don't mean to offend, I'm just perplexed by this video.

    • @candlescience
      @candlescience  2 роки тому +4

      Some jars, especially taller ones or ones that taper in shape, can trap heat and the wick will burn hotter as it burns down. In cases like these, it may be better to choose a wick that does not form a full melt pool on the first or even second burn cycle. For wider diameter jars or shallower jars, the heat tends to be fairly consistent and a full melt pool on the first burn cycle can be appropriate. There is a slight disconnect here though and thank you for pointing it out! In the video we say a melt pool of about 1/2" at the 2 hour mark but on the FAQ we say that the melt pool should be about 1/2" after a 4 hour burn, and this would be more accurate. While conducting burn tests, we always recommend burning the candle in cycles all the way to the end, leaving about a 1/4" of wax. This way, the maker will be able to see if the wick burns too hot by the end of the candle's life.

    • @photina78
      @photina78 2 роки тому +3

      @@candlescience Thanks you! I love the way you explained all that, it makes perfect sense! You guys are the best! 💖

    • @candlescience
      @candlescience  2 роки тому +3

      Thank you for asking important questions! Testing wicks can be the most frustrating and time consuming part of the process and while we try to offer good starting points, ultimately it will take a few test burns for makers to find the perfect combination for their specific materials. I'm glad to hear you've found what works best for you!

  • @abhishekdaksh4250
    @abhishekdaksh4250 2 роки тому

    Hi, can you help me choose right wick for our right glass container?
    Thank you!

    • @candlescience
      @candlescience  2 роки тому

      Hi! The type of wick you'll want to use will mainly depend on the type of wax you'll be using and the diameter of your container. Other factors that can affect how a wick burns are fragrance, dye, and container shape as well. The Wick Guide is the best place to start for a recommendation as to where to start testing but if you'd like to let me know the materials you'll be working with and the diameter of your container I'd be happy to check for you.
      www.candlescience.com/learning/wick-guide/

  • @carmenlaurel7351
    @carmenlaurel7351 4 роки тому

    hello dana what is the correct wick for the 3 wick tumbler jar, thank you

    • @candlescience
      @candlescience  4 роки тому

      Hi Carmen! Check out our Wick Guide for recommendations! www.candlescience.com/learning/wick-guide

  • @Mslexilove143
    @Mslexilove143 4 роки тому

    I bought the small twist top jar. So wich wick size would I need?

    • @candlescience
      @candlescience  4 роки тому

      Take a look at our Wick Guide for recommendations! www.candlescience.com/learning/wick-guide

  • @rachelbastow3667
    @rachelbastow3667 Рік тому

    Hello! Please could advise what I may be doing wrong with my testing as I seem to be getting tunneling and constant flickering. So the flickering suggests over wicking and the tunnelling under 🤔 thank you in advance!

    • @candlescience
      @candlescience  Рік тому +1

      Hi! If you are not getting a full melt pool after a 4 hour burn, the wick is very likely too small for your wax and container combination. A flickering wick can happen from time to time but generally if it is accompanied by a lot of smoke or soot this indicates that it is too large. It can be frustrating but this can also be caused by the wick struggling in the wax, environmental factors, or the wick not burning ideally for your wax and fragrance mixture. To fix the tunneling, I'd recommend testing a wick size up or maybe even two sizes depending on how bad the tunneling is. If the wick continues to flicker wildly, you may want to try a different wick series all together. If you'd like to send any images/video of the candle to the Support team at support@candlescience.com, we'd be happy to take a look and see if we could offer more specific advice for the materials you're working with!

  • @Obe.sparks
    @Obe.sparks 4 роки тому +1

    I ordered CD wicks from CS. The problem that I'm having is not about reaching melt pool or hot throw, the problem is that the flame flickers, not violently or sooting, but it isn't as calm as the one in this video. I'm trimming to 1/4 ". This problem is happening when the wax is already halfway down the jar. Any tips on this? It is a 3.5" diameter glass jar. Coconut/soy wax. Double wicking. I've tried Eco 4, 5 and 6.

    • @bethlovesapples99
      @bethlovesapples99 3 роки тому

      I'm not from CS but starting to dabble in candle making.
      Do you trim as you go or only at the start? I find trimming it once again in the middle of burning a candle helps with the flickering when it gets down halfway.

    • @rianatreshaun7535
      @rianatreshaun7535 3 роки тому

      Me too. All of them flickered. Every single one. No windows open and no breeze.

  • @bigbeartn
    @bigbeartn 4 роки тому +4

    was getting ready to place order with you guys but backed out because it was going to come from 2 different places...have to pay 2 different shipping no ty....$21 on one and $8 on another..the shipping alone was going to cost more than what i was ordering..

    • @candlescience
      @candlescience  4 роки тому +5

      We always do our best to make sure we're stocked in both our warehouse locations, but we can sometimes miss the mark, especially this time of year. We're happy to refund the difference in shipping from the other warehouse location though--just reach out to our support team and they'll get you taken care of. 🙂 candlescience.com/contact

  • @veronicagonzalez-yf2xx
    @veronicagonzalez-yf2xx 3 роки тому

    Podrían hacer sus videos en español? O con subtítulos? Gracias

    • @candlescience
      @candlescience  3 роки тому

      We would love to get more content out in Spanish! In the meantime, you should be able to adjust your preferred CC language for our videos on your UA-cam settings.

  • @ladym994
    @ladym994 3 роки тому

    hello, I have the perfect flame, and good melt pool but my wick burned faster than wax. Leaving so much wax left over. Whats the reason for this. Underwicked or overwicked? Please and thank you

    • @candlescience
      @candlescience  3 роки тому

      Hi! If you are seeing a lot of wax left over after multiple burn cycles, this could indicate that the wick is a bit too small for the candle. After the second of third burn cycle, the heat typically builds up enough to melt away any excess wax on the sides of the container. If this is not happening, you could try testing with a wick a size up to see if you get better results.

  • @s.r.tutorial7412
    @s.r.tutorial7412 3 роки тому

    What should be the ratio of the wick thickness to the thickness of candles..if not exact..then a rough idea would also be helpful for me..

    • @candlescience
      @candlescience  3 роки тому

      The Wick Guide will be a helpful resource for you to determine the best wicks to use for your candles: www.candlescience.com/learning/wick-guide

  • @kulwantkaur2564
    @kulwantkaur2564 Рік тому

    Which one is best

    • @candlescience
      @candlescience  Рік тому

      The different wick series will burn differently in various types of waxes so the series and size wick best for you will depend largely on the type of wax you'll be using and the diameter of your container.

  • @ladym994
    @ladym994 3 роки тому

    is it ok for the candle flame to be sticking out about 1/2 and inch from container even if its not sooting or dancing

    • @candlescience
      @candlescience  3 роки тому

      If the flame isn't dancing or putting out excessive soot, and everything else about the burn looks as it should, that should be fine.

  • @tbaby124
    @tbaby124 4 роки тому +5

    so what size wick with this jar using 464 soy wax would you recommend

    • @candlescience
      @candlescience  4 роки тому +1

      Our Wick Guide recommends a CD 8 or an ECO 8. candlescience.com/learning/wick-guide

    • @lovebringschangesful
      @lovebringschangesful 3 роки тому +1

      I don’t understand because in the video it shows cd 6 works best? But in the comments you put cd8... I’m confused?

    • @animalmother556x45
      @animalmother556x45 3 роки тому +1

      Anonymous The wick size is not ONLY determined by container size. The type of wax is also extremely important. Also dye, fragrance, ANY additives will change what wick you need.
      So, the commenter here specially asked about 464 wax. The wax in this video was different.

  • @anjusood9602
    @anjusood9602 3 роки тому

    Hi my candle is flickering should I size down or should I double wick my candle. Please help
    At. The moment using CND 24
    Soy wax

    • @candlescience
      @candlescience  3 роки тому +1

      Some flickering will be normal, particularly if the candle is in an area with people moving around frequently or in the path of any air flow.
      Make sure you are using the appropriate sized wick by taking a look at our wick guide: www.candlescience.com/learning/wick-guide

  • @maurabattersby7780
    @maurabattersby7780 3 роки тому

    Can the fragrance impact how a candle burns? For example, I burned one of my candles with a fragrance and with the same wick, same jar but different fragrance, I am now getting slight tunnelling. I'm not sure why this is happening! Any advice?

    • @candlescience
      @candlescience  3 роки тому +1

      The fragrance can absolutely impact your wicking and how the candle burns. Fragrances that are particularly dense may require wicking up one size.
      Also, make sure what you're seeing is actually tunneling. A small amount of wax clinging to the sides of the candle container during the first few burns is normal. If you're using soy wax, extinguishing the candle before it achieves a full melt pool can also cause tunneling in subsequent burns.

  • @akashahafeez1923
    @akashahafeez1923 2 роки тому

    I understood everything and it was really point on. But the problem is I want to start trying out making my own candles and I couldn't find standard size wicks like they haven't mentioned it on them that they are eco or lx whichever number.
    If my wick is 2mm in diameter so what standard wick size is it?

    • @candlescience
      @candlescience  2 роки тому +1

      Because wick series are manufactured differently and will burn differently depending on the wax you use, there isn't really standard sizing for them, unfortunately. The two main factors that will affect how your wick will burn will be the wax you use and the diameter of your container or mold but materials like fragrance oil, dye, and additives can also affect the wick's performance. The actual thread count or gauge of the wicks will determine how hot it can burn but the diameter of the wicks can be very similar between different sizes and series, especially due to the wax coating. Because of this, it can be almost impossible to identify a wick size by its diameter alone. If you have a wick you cannot identify, conducting a burn test with the wax you plan to use in a large container should help give a better idea of the melt pool it is capable of making. You could then compare it to the wicks listed on our Wick Guide as they are sorted by wax type and burn pool diameter. I hope this helps but please let me know if you have any questions or concerns!

    • @akashahafeez1923
      @akashahafeez1923 2 роки тому

      @@candlescience Thank you so much. 😊 I will try this method out.

    • @candlescience
      @candlescience  2 роки тому +1

      I hope it helps but if any issues come up, definitely just let us know and we'd be happy to assist!

  • @joelledillon6249
    @joelledillon6249 7 місяців тому

    I use coconut apricot wax. (Just switched) I'm trying to find the wick size fo my jars that are 3.5 inch in diameter. (They are the 14 oz libbey cube jars from lonestar) lonestar doesn't have a wick guide for the wicks I'm looking at and when I try your website it doesn't have my wax listed on the drop down. They told me to try 2 CD 10s or a CD 20. I looked at hive and honey candle supplies wick guide, and it suggests differently.. any help would be appreciated.

    • @candlescience
      @candlescience  7 місяців тому

      Hi! Unfortunately, because we do not currently carry coconut apricot wax, we have not been able to thoroughly test it for the wicks we have. I'm so sorry! We do carry coconut/soy wax as well as coconut/paraffin wax and the testing wick recommendations for a jar with that diameter would be two CD 8 wicks and a CD 18 wick respectively. The recommendations you received seem to track but without using the specific coconut apricot wax myself, I would be unable to say how differently it would burn from the other coconut waxes, unfortunately. I'd start testing with the wick recommendations from the wax supplier but based on the results of that testing, you may need to adjust up or down depending on your recipe.

    • @joelledillon6249
      @joelledillon6249 6 місяців тому

      @@candlescience thank you! I ended up ordering several sizes to test so we'll see.

  • @karenholder5847
    @karenholder5847 2 роки тому

    Another question, if I have wicks that I bought off Amazon, how can I tell if they're CD 10, 12, 14 etc.

    • @candlescience
      @candlescience  2 роки тому

      In this case, CD is the brand/manufacturer, and CD wicks are packaged and sold with identifying labels. If the wicks you purchased were not labeled with their series and size, there will be no way to tell whether they are CD wicks or how the wicks might compare to CD sizing, unfortunately.

  • @loo8628
    @loo8628 3 роки тому

    I’m using 100% soy 444 but after a couple burns I’m getting an almost brown discoloration at the top of the candles when they cool. Can anyone suggest what might be the problem??

    • @candlescience
      @candlescience  3 роки тому +1

      As you burn the candles, the wax will naturally darken slightly. This is normal. If the discoloration is extreme, it could indicate that the wick is too large for the container, and you may want to test out a wick size down.

  • @user-debbieT71
    @user-debbieT71 4 місяці тому

    What is a http 1212 wick compared too

    • @user-debbieT71
      @user-debbieT71 4 місяці тому

      I have some and don’t know what to do with them please help

  • @alexandrag.5627
    @alexandrag.5627 2 роки тому

    Hi. What if the meltpool after 2 hours is correct, but thew flame is high. It's stable, doesn't flicker and doesn't smoke, but it's high. Should I still look for another wick?

    • @candlescience
      @candlescience  2 роки тому +1

      Hi! It might be worth testing a wick size down to see if you still get the same melt pool and throw just with a smaller flame. If the flame is controlled but still high, trimming the wick to about a 1/4" could help if you have not tried this already. It may be worth burning the candle all the way to the end too as a wick can burn hotter as it gets lower into the jar. If you notice that the height of the flame increases the longer the candle is burning, sizing down could help with this. If you'd like to send any pictures or video of the candle to the Support team at support@candlescience.com, we'd also be happy to take a look!

    • @alexandrag.5627
      @alexandrag.5627 2 роки тому

      @@candlescience Wow! Thank you for such detailed answer! :)

    • @candlescience
      @candlescience  2 роки тому +1

      @@alexandrag.5627 Very happy to help! Let us know if you run into any issues during testing!

  • @Valentina.m407
    @Valentina.m407 2 роки тому

    Where can I get those label stickers ?

    • @candlescience
      @candlescience  2 роки тому

      Our product team actually prints them as needed! For the 4 oz jelly jars, they used a 2" x 1" address label. There are some great tools for creating your own test labels though such as Canva or Avery We Print. Etsy also has some great templates!

  • @Tracy_Mishelle
    @Tracy_Mishelle Рік тому

    Hi, I've been researching to find a wick suitable for doughbowls Question Will theese work for what I'm doing? Do i need the 20 or 22 version you offer? And how many do I need for and 18 inch long 8 inch wide vessell? Please help! Thank you! I'm making 18x8x2 dough bowl candles and I'm using 464 soy wax with 10% fragrance load.

    • @candlescience
      @candlescience  Рік тому +1

      Hi! Unfortunately, because we don't sell dougbowls, we have not done a ton of comprehensive testing with them. I'm so sorry! Shallow vessels can be tricky to wick and when working with a wooden container, you may even want to slightly under-wick for safety. To get a better idea of where to start though, the Wick Guide will show you which wicks are capable of achieving different melt pool diameters in the 464 wax. I would assume that you may need 3 or 4 wicks depending on the size but it would take a burn test to see.

    • @Tracy_Mishelle
      @Tracy_Mishelle Рік тому

      @@candlescience Thank you so much!

    • @candlescience
      @candlescience  Рік тому +1

      Happy to help! I'm so sorry I wasn't able to provide some more specific info for that vessel!

  • @joicemarasantoscaetano3559
    @joicemarasantoscaetano3559 2 роки тому

    Gostaria de legenda em português como faço? Ou o vídeo em português

    • @candlescience
      @candlescience  2 роки тому

      Hi! Hopefully, we can make our videos more accessible in the future! In the meantime, you may be able to change the language settings on your computer or mobile. If you go to the "settings icon" in the video (looks like a little gear icon), you should see an option for "Subtitles/CC". Here, you can select the "English" option.
      After that, select the settings icon again. You should now have an option for "Auto-translate". Once you select that, you can change the language. It may not be 100% accurate, since it's auto-generated. But it should help!

  • @nancykathryntieger8893
    @nancykathryntieger8893 Рік тому

    What is the size of these candles please? They are perfect for wedding favours.

    • @candlescience
      @candlescience  Рік тому

      These are 4 oz jelly jars, the Mini Tumblers might be nice as well! www.candlescience.com/containers/mini-tumbler/

  • @shericreates
    @shericreates 3 роки тому

    So what is the difference between a LX and a ECO?

    • @candlescience
      @candlescience  3 роки тому +1

      They are different wick series/brands, and are constructed in different ways. The LX series is our most often recommended series for many paraffin waxes and burns with a tight, controlled flame. The ECO series does well in soy waxes and has good burn stability--it also does well in low melt point paraffin waxes.

  • @lenirebynica
    @lenirebynica 3 роки тому

    Hello! I am from Philippines. Do you ship here and has your own delivery service? How much will be the minimum shipping cost? I really wanted to start a candle business and you as my supplier. But I don't know how to reach you.

    • @candlescience
      @candlescience  3 роки тому

      Hi! Currently, we are only able to ship within the US through USPS or UPS, I'm so sorry for any inconvenience. We do hope to expand our shipping options and location in the future though!

  • @poompella5290
    @poompella5290 6 місяців тому

    What do you do in a situation when 1 wooden wick is becoming under-wick and 2 wooden wicks become over wicked ?

    • @candlescience
      @candlescience  6 місяців тому

      Unfortunately, because we do not sell wooden wicks we have not done enough comprehensive testing with them to be able to recommend specific sizes.

  • @CorneliaS0308
    @CorneliaS0308 4 роки тому +2

    I buy my wicks from you guys but I feel I’m under wicked. So what exact size wick would I need for a 12 oz candle jar?

    • @daniellemunyalo2464
      @daniellemunyalo2464 3 роки тому

      Lovely video content! Apologies for chiming in, I am interested in your initial thoughts. Have you heard about - Honulian Wiffy Remover (just google it)? It is a great one off guide for making money as a candle maker without the headache. Ive heard some decent things about it and my mate finally got excellent success with it.

    • @franciscal1782
      @franciscal1782 3 роки тому

      Cheers for the Video clip! Sorry for the intrusion, I am interested in your thoughts. Have you considered - Honulian Wiffy Remover (do a google search)? It is a great one off product for making money as a candle maker minus the normal expense. Ive heard some unbelievable things about it and my work buddy after a lifetime of fighting got astronomical results with it.

    • @RegiOLobo
      @RegiOLobo 2 роки тому

      @@daniellemunyalo2464 does spamming like this on other peoples video has even worked for you? get your own channel to promote your shit

  • @patcharles3336
    @patcharles3336 4 роки тому +9

    I want to make my own candles but, for some reason choosing the right size wicks are a bit complicated. How do I know the right size for my project for such a simple job?

    • @candlescience
      @candlescience  4 роки тому +2

      Check out our wick guide for recommendations to begin your testing! candlescience.com/learning/wick-guide

    • @john3-16.
      @john3-16. 2 роки тому +4

      @@candlescience this is not accurate UNLESS people are ordering from that company. There needs to be a universal wick chart. As the soy 415 I use is not in that list. So frustrating

    • @mikejimenez5809
      @mikejimenez5809 Рік тому

      Check candle Science wick guide. Check you wax type and container width. It will tell you a starting point wick.

  • @aparajita1in
    @aparajita1in Рік тому

    Can anyone tell me why sometimes the flame is very very small? Steady, but very small

    • @candlescience
      @candlescience  Рік тому

      It could be a few things! The wick may be a bit too small for the candle. Or the wick may be struggling to burn in the fragrance or dye in the candle. In some cases, if a wick is burning too hot it can also create a tunnel which could cause a wick to drown. If you are getting a good melt pool though, I'd recommend making a candle with a wick one size larger than the one you are currently using to see if that helps!

  • @her.saving
    @her.saving 3 роки тому

    is this testing without fragrance oil?

    • @candlescience
      @candlescience  3 роки тому +1

      We would recommend testing with the exact recipe you plan on using to get the best results. The type and amount of fragrance oil can affect how a wick burns so completing a test burn for each combination will give you the most accurate idea of how the candle will burn.

  • @ilianaperisteridi951
    @ilianaperisteridi951 3 місяці тому

    I face a contradictory problem😅 I use a wick that doesnt melt the candle all the way to the jar(leaves aboute 0.5-0.8 cm),but also the wick is "mushrooming". When i use a sized up wick i am getting the same melting pool but heavier mushrooming and smoke. When i go a size down, no mushrooming but huge tunneling. I swear it is very overwhelming. Any tips?

    • @candlescience
      @candlescience  3 місяці тому +1

      Happy to help! This can happen with certain waxes and even with a couple different kinds of jars. If you haven't already, I would complete a few burn tests in the same candle of about 4hrs each (depending on the size of your jar) until the wick has completely burned down. As a wick burns lower into a candle, the heat can take a bit longer to escape the jar and this can help melt away any linger wax on the sides. Some waxes and recipes also burn more slowly than others and you might not see a complete melt pool until the second or even third burn cycle. As long as you are getting a good hot throw from the candle, this is nothing to worry about!
      If you're still seeing mushrooming and tunneling though, you might also want to try a different series of wick to see if it performs more to your liking. If you'd like to reach out to the Support team with some more information about your specific materials and process though, we'd also be happy to see if we can offer some more tailored advice. We can be reached at Support@candlescience.com.

    • @ilianaperisteridi951
      @ilianaperisteridi951 3 місяці тому

      @@candlescience Really, you are the most helping channel and your kind answers always makes a difference. Thank you very much for the advices.

    • @candlescience
      @candlescience  3 місяці тому +1

      We're always happy to help and thank you so much for your kind words! Definitely let us know if you have any questions!

  • @HiyamAwartani
    @HiyamAwartani 11 місяців тому

    hey I tried to order but unfortunately you don't ship to palestine. I'm interested in importing how can I contact you

    • @candlescience
      @candlescience  11 місяців тому

      Hi! Unfortunately, we are currently only able to ship within the US and Canada. I'm so sorry for any inconvenience! You can always contact the Support team at support@candlescience.com though!

  • @wiki7559
    @wiki7559 Рік тому

    I have the right size wick however my flame is moving(dancing)alot.

    • @candlescience
      @candlescience  Рік тому

      A few things can contribute to a dancing flame but these are the more common culprits:
      - a draft from a window, air flow, or vent
      - the type or amount of fragrance oil in the candle
      - the wick and wax combination
      - a wick that is a bit too long or has not been trimmed
      - the candle has been burning for longer that 4 hours
      I hope this helps but if the issue persists, please feel free to reach out with an image or video of the candle and we'd be happy to see if we can offer some more specific troubleshooting! The Support Team can be reached at support@candlescience.com.

  • @Olivep3a_
    @Olivep3a_ 3 роки тому +1

    Cant anyone just tell me what wick they use for a 6oz 3in in diameter candle? Just tell me so I can test it out and if it doesnt work, I'll try something else.

    • @candlescience
      @candlescience  3 роки тому

      That's what our Wick Guide is for! 😃 candlescience.com/learning/wick-guide

  • @davidlee50
    @davidlee50 2 роки тому

    I liked it but you did not show the wicks used in the candle burning part.

    • @candlescience
      @candlescience  2 роки тому

      Hi! The wicks we had used for this particular burn test, along with the wax and fragrance type, can be seen around the 2:30 mark. But because so many elements and ingredients can affect how a wick performs in a candle, testing will still be needed to find the best wick for your particular recipe and materials. The Wick Guide is a great place to get started but burn testing will give you the most accurate information as to whether you may need to adjust the wick size or series.

  • @andytole4807
    @andytole4807 2 місяці тому

    How long is the correct size then ??

    • @candlescience
      @candlescience  2 місяці тому

      The ideal wick size and series for your project will depend on a few things such as the type of wax you're using, the fragrance type and amount, and any dye that might be used.

    • @andytole4807
      @andytole4807 2 місяці тому

      Well this is the video about supostely

  • @DebsShipley1969
    @DebsShipley1969 2 роки тому

    Helpful but Eco wicks are very prone to mushrooming

    • @candlescience
      @candlescience  2 роки тому +1

      Depending on the ingredients of the candle, the ECO wicks can definitely mushroom a bit and the CDs tend to do so even more naturally due to how tightly they are bound. A mushroom on a wick won't always indicate that there is a burning issue in the candle but if it is accompanied by a lot of smoke or soot, it may be worth testing a different wick size or series.

  • @thomasralfenson2684
    @thomasralfenson2684 3 роки тому

    I did it too. This is what I used Woodglut designs for

  • @JohnSmith-td7hd
    @JohnSmith-td7hd Рік тому

    1:50 Why did you use the same wick to be each different size wick? Just buy all the wicks and lay them next to each other.

    • @candlescience
      @candlescience  Рік тому

      I'm sorry, I'm not quite sure I understand the question, my apologies! The wicks pictured are all different sizes of the same series. They are almost impossible to tell apart by looking at them but they will all burn differently. The wicks look similar but will have different gauges, or thread-counts, and that is what makes them burn hotter.

  • @StanlocoInc
    @StanlocoInc 3 роки тому +2

    Great information and is all good and dandy if you like the trial and error method.
    Nothing says wasting money on a failing business like having tons of unneeded products just sitting around.
    It’s to bad the companies that make these products haven’t already done the science to just tell us what wicks, waxes, dyes and fragrances work best together. Oh wait they did and they’re keeping it to themselves so we keep spending on trial and error 😂 That’s the business to get into, not actually making the combination of items into a finished product, but selling the millions of options to the masses 🤣 candle science is a clever name for we sell confusing nonsense.

    • @candlescience
      @candlescience  3 роки тому +4

      Hi! While testing your finished candles is the best way to ensure that they are safe and burning properly, we do our best to take care of a lot of guesswork for you. We don’t want anyone to have too many supplies left over either! To make choosing materials a bit easier, we have the Wick Guide, Wax Guide, Lab Notes, and product details available right on the website. We also list popular wax and wick combinations for different containers directly on the jar’s product page. Because we have not tested every possible combination however, it is still recommended that makers conduct burn tests before using, selling, or gifting candles. It's even common practice for large national brands to routinely test for quality control! If you’re ever struggling with a particular recipe though, please feel free to reach out to our Support team and we’d be happy to offer some more personalized help.

    • @bitcoinguy2607
      @bitcoinguy2607 2 роки тому +1

      EXXACCTLLYY like, why not tell us a GUIDE on what WICS to USE for size of jars or tins and Give us the exact ones they use but, you're right... "WE" have to figure that out through trial and error lol

    • @vivnaidu2869
      @vivnaidu2869 2 роки тому +2

      @@candlescience fully agree with the logic behind testing the guidelines to make your own recipes. I am in a high-altitude location and this affects my recipes too. There are just too many variables and unfortunately the only way around it is to test. If there was a bulletproof recipe for candle-making, then everyone would be doing it! like every other craft, it's a discipline and takes time to perfect.

  • @farah7284
    @farah7284 4 роки тому

    1:00 definitely candle that i bought.. ugh. Wont buy this again

    • @danielatomescu3487
      @danielatomescu3487 4 роки тому +1

      Just wonderful, I've been looking for "candle making home buy back agreement" for a while now, and I think this has helped. You ever tried - Peyaniel Psychological Predominance - (just google it ) ? It is a smashing exclusive guide for discovering the trick to be a candle maker for profit without the hard work. Ive heard some great things about it and my friend got cool success with it.

  • @89daniellegordon
    @89daniellegordon 4 роки тому +21

    So you have to buy a bunch of wicks & waste them, wax & jars doing burn tests

    • @sinfullheart37
      @sinfullheart37 3 роки тому +1

      Danielle Gordon yup! Very spendy!

    • @candlescience
      @candlescience  3 роки тому +20

      Respectfully, we'd like to challenge the view of testing as a "waste." Thorough testing ensures you have a candle with a predictable burn and reliable performance. Candles are objects made to be set on fire, and when fire is involved you never want to use words like "unpredictable" and "unreliable." Since there are so many individual factors involved in candle making, like fragrance load, temperatures, dye usage, climate, etc, there is not a "one size fits all" formula. Testing is a necessity. Two candle makers may use the same exact process and supplies and get two different results.
      That said, there are certainly some steps you can take to help reduce the time and supplies you might spend testing. Reference the Wick Guide, spend time researching what other makers using the same wax and container are using, learn all you can about the supplies you're working with. And we're always here to help, whether it's assisting with troubleshooting or answering a quick question!

    • @savannalove7739
      @savannalove7739 3 роки тому

      Lol pretty much!!!

    • @DankUrbanBoss
      @DankUrbanBoss Рік тому +5

      That’s called research and development

    • @Jane-West
      @Jane-West 7 місяців тому +1

      Yes you do, if you want to create a safe and quality candle! It's not for everyone, but I wouldn't want to give or sell a product that hasn't been fully tested, especially when a flame is involved!

  • @wayy_erica
    @wayy_erica 2 роки тому

    No size

  • @Vonica52
    @Vonica52 2 роки тому +1

    Who can afford trying different wicks🧐

    • @MisterWhatWhat
      @MisterWhatWhat 2 роки тому

      I'm a beginner and this comment hit home.