Yamaha AV Receiver Full Setup Tutorial(Dolby,Hdmi,Panorama etc)//How To Setup AV Receiver Manually
Вставка
- Опубліковано 13 гру 2022
- Teen Patti Master Download Link:- nn4.pw/aw/xvfbk7
Others Channel Link:- ------------
Study Channel:- / @thegatelearner-original
Gaming Channel:- / @thegamelover5405
Yamaha AV Receiver Setup Guide//How To Setup AV Receiver Manually
#technoboy
#soundtest
#demo
#speaker
#bluetooth
#yamaha
#avreceiver
#receiversetup - Розваги
Great video, plenty of detail, very helpful. Curious why you chose Base/Treble tone over EQ. Its certainly a lot easier than setting up EQ, but does it offer as good or better sound control. I have my Tone Control on bypass and spent a lot of time adjusting the EQ to get the sound I wanted. Using Tone Control seems so much easier. Thanks for the awesome video.
Learned a lot about how to setup my receiver! Thanks!
This was incredibly helpful!!
Thank you for a very comprehensive tutorial!!!
Excellent guide. Thank you friend.
Very helpful,thanks a lot
Thanks a lot for your valuable information. It was very useful for me to setup my AVR as Iam new to AVR systems.
thankd for the full information
Thanks for the video
Super thank you for good help
Good video. Volume Trim is increased sound. What about 4k if on what is effect.
great video thanx
Wow this is great. I am having slight trouble with mine, i have a Yamaha tsr 5810 receiver. My speakers are: center, 2 fronts, a sub, i have two surrounds and two atmos height speakers. Should i connect my surrounds to rear surrounds and the atmos height speakers to the surround channel? I have them all hooked up but have yet to access atmos. Also what do you recommend to do if dialogue has a slight muffle sound on the tail end of vocals? Thank you in advance!
Conmect atmos to rear surround & change the setting from the receiver. You can use 7.1 or 5.1.2 as atmos. In that case rear surround will convert to atmos. You gotta change the setting from the receiver
great tutorial
Excellent thank you
good info
Thank you 😊
Hello, could you please advise on the wiring on the back of panel, I have 4 roof speakers two in the front and two back room, each on left and right,thanks
For this setup you need atmos receiver of atlest 5.4.2 setup. Which receiver do you have
Hi, thanks for your Video. I want to use a Soundbar instead of an 5.1 system can i connect it via Optical cable ? Actually i have a 5.1 system but its not that good. Where can i select the optical Port on the receiver for the sound ? Thank you
( RV X 479 )
Use the input select button
Brillant
Hello your tutorial is indeed comprehensive and well explained.I have a recent issue with my AV Receiver Rx- V371.The TV has been playing through the receiver for several years.But recently happened to mistakenly press the stereo button on the remote and after this the TV sound no longer is heard through the receiver and 5 Bose speaker along with sub woofer.Will appreciate your assistance.Thanks
Press the surround button & select dolby pl2 & also check the audio output setting of the tv.
Thankyou.I will try it.
thanks so much
Thank you so much for the great teaching of the Yamaha receiver you were great the only thing is it was hard sometimes to see where you were pressing the buttons so please hold the controller a little higher otherwise it it was the best 👍
Yeah focusing on the display & speech, sometimes missing out the remote. Incase if you need to know something feel free to ask. Thanks for watching.
@@technoboy-allinOne no problem though it works awesome 👏
Great video! I don't understand why you needed to set levels when i would think the distance setting would have taken care of that?
No, distance helps the unit determine timing. when the sound plays from each speaker to ensure it sounds like it’s coming from the same source. the levels are a separate but equally important setting.
Hi
how is it possible to increase the volume , when i want to hear the music,
i use only 2 front speakers to hear the sound from tv for movie , but whwn i want to hear music , the is weak, even i put the volume to Max, can you please help me.
and i use HDMI cabel for Tv out from tv , to hdmi out from receiver , called AV1, is it correct ??
I dont think the connection is correct
Nice video thanks
Do i need different receiver for a Dolby atoms speakers?
Yes
I have a Yamaha htr 5830 and for some reason it stopped responding to my Yamaha remote (the one it came with). I’ve changed the batteries and though the remote itself lights up, still no activity when I point it to the receiver. Any tips?
Reset the receiver & try. If it still doesnt work then maybe the remote is ok but the receivers remote sensor gone bad
On the speaker configuration setting only able set center speaker to Large or Small? i see in the video it don't have option set to None.. Is that true?
None option is there too.
Hi can I use 2 subwoofer on yamaha HTR2071? I have used my subwoofer and planning to use the another extra port called pre out subwoofer is it possible to use both?
Yes you can use both the subs
@@technoboy-allinOneI mean I can use them at the same time?
Yes you can
@@technoboy-allinOne Thanks
How to set equalizer In Yamaha AVR ?
Better if you display positions of speakers covered in the video.
Hello the grave is good for movie ? Does it decode all the sound dolby atmos true hd ect and dts
It's not Dolby Atmos receiver
Sir can u tell me why my woofer effect has been decreased since one of my kids have changed something by playing with remote . My woofers has been decreased compared to yesterday
Subwoofer? Some setting may have changed. Check the frequency, maybe reduced to the lowest or maybe the sub level has been reduced
Hi, i watched all of your video. I have spent two days without success on configuring my setup. I have Yamaha RX-V3075 amp, Yamaha Subwoofer SWT800, and 5 small energy speakers. Subwoofer turns on and lights up but no sound from Sound test. Connected to Hisense 4k 65" TV... Also, having trouble with the ARC + HDMI working...
Reset the receiver. Check your connections. Select sub as yes.
I have done all this. I now have the ARC working on Receiver and TV.... Just the Subwoofer is not working. I took it to get looked at now. Hopefully not too expensive to repair@@technoboy-allinOne
While setting 80hz then the volume of subwoofer how i put, means back side of the subwoofer volume button full or half? Could you please revrt?
Set the subwoofer vol at full. Then adjust the level from the receiver
Ok noted sir. Thanks.
I notice I get better sound with Music /5 Channel select rather than any of the "Movie" selections BUT, the Audio sinking becomes then misaligned.
Hello Dear
I just bought ONKYO HT-R980
can install below Items or will be overload
2 speaker JVC SK 1000
2 speaker Bose 701 from 4 OHM to 8 OHM
2 speaker technics SB-A53
And how to install all in this device
Sorry for Late reply.
as I have checked all these speakers are large speakers. can be used as front speakers only. Receivers minimum impedance is 6 ohm. So You must use speakers with 6 ohms or more. so you can choose any pair from the list and use them as front speakers. use small speakers as surround. also you can use one of them as center speaker too.
I'm trying to set up my turntable into this receiver. I plugged into the CD input but the sound isn't loud and then if I turn up the receiver shuts off. Any idea? I'm struggling to play my records! Thanks in advance!
Check the connection. Set it to stereo mode ,& try playing
@@technoboy-allinOne I figured it out! Wire not connected correctly. Thanks for response
I set it up like you mate and I get a muffled sound very quiet any idea?
Did u reset the receiver before the setup?
Auto DRC for night listen using AVR
So, I just want to run two speakers for music off of the Yahama receiver Htr 4065. I know I have the speakers attached correctly, but cannot figure out how to get sound. Not attaching a tv or anything else. I just want the speakers to work and possibly attach iPhone for Apple Music. I am absolutely befuddled.
Need more info about the problem. Anyway Select the stereo mode & you will have front 2 channel working only alone with subwoofer unless you select the subwoofer as none from the settings
Sir as per video if the speaker's size is large then it is set to large and small speakers but it is not correct. Sorry if I have wrong understanding by me
Selecting large speaker provides more bass to the channel speakers & subwoofer would just support for vibration feel. But if you select large speaker but use small speakers. Then you will have low bass. Because subwoofer will work at very low frequency
Which model is your receiver...
In my receiver I don't get all this in amp display....it shows view on screen....
Mine is htr-2067. Its better to see the display om tv. There you can see in details.
Great video. My system has a short pause when the crossover to the subwoofer happens is that normal?
Yeah when you change the frequency it happens
For some reason my speakers dont immediately activate when my TV is turned on, the TV is connected via an arc hdmi. Do you know this problem?
It takes few seconds. Thats not a problem
What's the difference between adjusting dB level on subwoofer in speaker settings versus adjusting subwoofer trim?
Subwoofer trim enhances the low frequencies by avoiding overlap with the front speaker output.
@@technoboy-allinOne do you turn it up or down
I kept it at default setting
I have the exact same reciver, how to get bass from front speakers?
Select front as large speaker & decrease the sub frequency to 60hz. Then till 60hz all frequency will be on front speakers
Nice explanation video. What is tone control
Ton control is for bass treble
While selecting surround option the subwoofer speaker bass voice not hereing like fighting scene..
Adjust all the speaker volume properly & check the sub frequency
I have ARC hooked to my TV and receiver. When I turn the TV on, no sound from input 4. Then I change input from 4 to 3 and. back again and then I have sound. Why?
I made a video on connecting receiver to tv using arc. Plz check that out.
AV Receiver Amplifier?
I’m not getting any sound from my front left and right channels any help ?
Check the speakers & connections using a 9v battery. Then use the test tone in the receiver
How do you get the setup to show up on the TV?
if you have a hdmi output on your receiver use that into the tv....and then select the source to whatever hdmi input you have connected on the tv...then press set up and you should be able to see it on the tv. cheers
I can't get the TV sound thru the receiver HDMI/DVI from TV to HDMI/ARC from receiver. Only radio making sound. Nothing from the tv
You need to connect tv hdmi arc to receivers hdmi input
I have yht 196 model… no sound when played 5.1 content of netflix amazon prime etc. from sony google tv…tried hdmi cable in input and output both slots… sound comes in output slot only and that too only for non 5.1 content… if i use firestick in input and output hdmi to non smart tv.. it works fine… any srtup to be changed or it will not work with 5.1 content
Why are only my right speakers working? It's hooked to a turn table with external preamp
Check the speakers. Use test tone on the receiver
What is the main role if i select small vs large in speaker setup. Pls revert sir.
In large speaker setup most of the low frequency go to the front channels & sub deliver the lowest frequency
Oh got it sir. Thanks.
my unit have no sound it only have if i used the direct button please help ?
same with my unit i dont no why no sound only if used direct have
Only pure direct is working? No bass treble maybe. It means the logic board has some kind a problem.. get it repaired or replaced.
Why is 80Hz better than 160Hz? If that’s the case why would they make 160 the default?
If 160hz was best then they didnt need to provide option to select. It depends on the peoples choice. & also different to hear for music, movies etc. For movies 80hz is better or 60. You will have a vibrating heavy bass like movie theater. Whatever frequency you select thats the entry for sub. & till that its for the channels. Hope you understood.
@@technoboy-allinOne great explanation thank you! 🙏🏽
Crossover is based on your home theatre speaker capabilities. Most speakers (including towers up into the thousand dollar range) prefer to be set as small with a crossover around 80Hz to the subwoofer. It can be room dependent but to my ear I prefer frequencies below 80Hz to be played by the subwoofer. It helps free up your speakers to play higher frequencies with more clarity too (they’re not busy playing lower frequencies). If you prefer 90Hz that’s into the psychoacoustics field and I’d say just listen to whatever you think sounds best/ provides most clarity.
@@FuriousTortoise 🙏🏽🙏🏽🙏🏽🙏🏽
How to setup DSP level increase and decrease?
Dsp is preset
I connected my tv to avr via HDMI arc
But sounds only in stereotype not Dolby digital
Chech the setting
@@technoboy-allinOne hello can you make a unboxing video of YAMAHA 2071
DSP effect is waht
Who do I ask for help with this stuff ?
What kind a help?
Man, use your TV screen...crazy difficult for viewers to look at your receiver screen...
Made a video long back using tv screen. You can check that out. Thanks
You are not letting us see your inputs during your processing. 😮
Sorry for that. Plz check the new video. Thanks
what is the monitor out for?
Its for display purpose. Connect it to a tv & open the menu. You can see all detail menu on the tv. It helps you setup the receiver properly as you can see all on tv which is not possible on the receiver's small display.
thank you@@technoboy-allinOne
thanks@@technoboy-allinOne
HOW TO CONNECT MIC ?
You cant. No mic input is there
What is Monaural Mix under DSP Parameter and in Modern AVR 4k is for what. It is to be set at what?
4k is video pass through for HDMI to tv or projector & audio for receiver.