Installing GAF Grand Sequoia roofing shingles on shed
Вставка
- Опубліковано 15 вер 2024
- I am installing the roof on my shed.
GAF Grand Sequoia roofing shingles
www.gaf.com/en...
Lawn Rebel Merch: lawnrebel.com/
If you like this video and what I am doing on my channel please hit the like button and subscribe to my channel. If you want to see more of this kind of stuff tell me in the comments section below.
Support me:
DO MY OWN: shrsl.com/10htz
Uphill hose: amzn.to/2MNwsnU
Eley: bit.ly/2WD76fv
Patreon: / connorward
Contact: connor@lawnrebel.com
PO Box 6392
Logan, UT 84341
#lawnrebel #connorward #sheshed
As always the best "how-to" on the UA-cam's!
Pro tip for those who don't have power shears, or just want to do it faster. Cut the back side of the shingle, not the sand side. One score, then bend to break. Great vid.
Oh man. I wish I would have known this
@@lawnrebel what's this Connor Wards first rooftop blow,🤣🤣🤣. Connor I really just stopped to say what's up Happy New Year !!! Still my favorite Channel by far 💪 You da Dude ,😉😊😉
One more step closer to finishing the shed. Looking good Connor. 👊
How many of you have done the head turn, eyes closed when cutting something suspect rather than grabbing safety sally eye protection. 🤚
Right. Who hasn't?
FYI: Your starter strip is supposed to have the tar side down to the edge of the roof. Also, the pipe flashing is probably going to leak. That doesn't look like the right flashing for that kind of pipe.
The rough on your shed is looking super nice. I especially like the way the underside of the eaves look with the Can lights.
Roofing Rebel. The most dangerous project to date. Nice selection and work
You make it look as easy as 1-2-3.
Best wishes and a merry Christmas for the whole Ward family! Be blessed and stay healthy!🙌🙌🙌
Love watching the progress! Roof looks great!
Nice work on the roof bro! Can't wait to see it with no snow on it.
That looked like a lot of work! Great Job!
I sure hope you get your new home done this winter pal!😂
Looks great! I can’t believe the lawn rebel used the sequential trigger on that nail gun and didn’t put in the bump trigger to go pop pop pop! That she shed is looking awesome!
It has the bump trigger. Hold that baby down and pump the safety. A sequential triggers are terrible. That is one thing that I do know for sure
I worked construction for 10 years starting in the mid 80's...the first thing the owner / boss taught me was to always throw away the instructions first ! 😆
Right. I mostly always do this
Damn donkey fight in the background lol. Conner you live in a beautiful place. The mountains are so nice.
Great work on the roof. If the only thing you did wrong was put the starter strip on with the tar strip up I would count that as a win. Who hasn’t cut a piece of metal with a chop saw before. Those shingles look awesome and are never fun to install.
👍🏻Nice work. You are a beast doing that in the cold. Awesome video quality .
You get all the fun toys. A cordless shovel. A cordless scissors. And now we need to see more of your neighbors donkeys.
Not first, but happy to see another video to watch!
Great job! Makes me anxious watching you up there. Lol. You got it done though. 👍🏻
Anyone else see the donkey and the water tricycle at his neighbors house? Now that is two things I never thought I would see together.
Aren’t your starter strips on upside down? Tar holds the edge down.
Could be. There are 2 starters so I'm not concerned
Well, at least it’s not a “How-to” video
It's entertainment only, and it seems like there are enough nails on the edge.
Yes, the starter is on upside down and they do go all the way up the rake
I did do the starter up the rake. Just didn't show it
Roof looks great!
Roofing Rebel
Six nails per shingle minimum here in hurricane-land. Right or wrong, I just use a full shingle for my starter row and my nails just go into the tar strip. I love the architectural texture of your shingles!
Yeah thats what I did
It’s best to lay shingles in hot weather... Ryan knorr should help so he knows wut a hard days work is
Ha. Fat chance
*I need to get me one of those Lawn Rebel winter hats!!!*
I got one!
Sweet. You're going to love it. They are nice
@@lawnrebel I had to treat myself for Christmas. 😉
Uggh...Snow....I see it like once every 3-4 years and then its gone in like 12hours
Be grateful for that
GREAT JOB. DOING IT IN THE COLD YOU DID IT. BOY I GIVE YOU A LOT OF CREDIT.
It was cold and dark. Did most of it after work in the dark. This is why the bulk of it didn't get filmed
MERRY CHRISTMAS TO YOU & YOUR FAMILY.
I always thought you could not do roofing in winter because you don't have the summer heat to seal and risk them blowing off, meh, what do I know. Nice job
Thanks Steve. You can and you are correct. They will take some heat up in the spring to all tack down and meld together. They will be fine
Nice USA Flag in the background....Never apologize for being Patriotic 🇺🇸🇺🇸🇺🇸
Connor NOOO....you shouldnt lay shingle when the temperature is lower than 45°. The nail going thru the hard material can cause the shingle to shatter or crack around the nail hole allowing rain and snow melt in .. also the tar stops on the shingles wont tack the the other shingles in low temp and no sun .. I dont mean to bug u I love all the videos and try to comment constructively.. so if you do see leaks it might be from the cold .. but you will more than likely be good
Yeah instructions did say that it would need to warm up to tack down but didn't say anything about not installing in sub freezing. I read them all. They didn't shatter. I watched for that closely as that was a concern of mine before I started.
We shingle in the winter all the time. You had the right nail gun and if you your pressure set right everything is fine. That is a heavy shingle and pretty hard to blast through. Keep up the good work.
Yes a very heavy shingle with an awesome look and life. 50 yr
Love the shed build videos! Thanks LR!
I admire your enthusiasm of the roof, but I would have waited till spring. The shingles have glue strips that are activated by the heat of the 🌞
Those shingles are so heavy and with the nails he put in them they will be just fine until spring. Construction work never waits for old man winter
You do outside work in winter too and film it? Nice! Shed is looking good!
What are going to use for Insulation inside the MAN SHED?
Pink Foam or Fiberglass Rolled Insulation?
Looking really great so far! Using "CADET Heaters" out there oe Baseboard Heaters?
MERRY CHRISTMAS BRO! 🎄
Probably closed cell foam 2 inches and then batts
You gotta get sister ward to bring you some nice hot cocoa when you're working out there! I wonder if that "electric shovel" can spread peat moss...hmm
Looking good....
The leaf blower might have been easier. That looks like a light, powdery snow ideal for blowing off the driveway.
What kinda ending was that?
In 2020, I've learned that if I'm going to have to potentially do the roof again in 20 years that I pay the extra up front to use Grace for the whole roof and then run standing seam metal roofing over that. Shingles in the cold does not look fun
These are 50 year shingles. The cold sucked but the lawn was growing in the warm Temps
"My guy says no one does that" No one has a warranty that will be honored either? Just asking. Looking good.... and cold
Hard to say if they will honor the warranty or not. I did install the shingle up the rake. I didn't show it on camera because it was dark but I did do it
Why did the video end like that? I wanted to see the cordless shovel in action.
Coming. Video was too long. Next vid
It’s called “building anticipation”
Man I sure hate roofing. Just watching you makes my back hurt
Good thing you used your finger as as reference measuring the snow thickness 😉😂.
Yeah that is how I do it. Works pretty well
Judging by your measurement method it looks like you had about 8” of snow on the roof 🤣
My motto: Never teach your wife how to read a tape measure.
That's the biggest cliff hanger ever in one of your videos!
Why shingles I would have went with metal which is much more simple to put on and would not have taken 4 days. It would just be like 10 roof length long pieces of metal and boom easy done in a day. Also it lasts basically forever, like 100 years
I wanted the look of these particular shingles
Whats that drill attachment called, it looks awesome.
www.lowes.com/pd/DEWALT-Shear-Attachment/999928850
I imagine some version of this
Yeah that is pretty much it
Oh no😱 what are you doing? Don't blow the powder away🤣
With happy end😍
A cordless shovel? Please be honest in how pointless that must be
What the heck, why pay for the forklift running the shingles up to. You for, that’s what kids are for 😂
I didn't pay
If I lived next door, I'd setup bleachers and sell tickets to watch you work...
Who would get the profits? Me or you? Or split?
@@lawnrebel Have to be a split. Maybe we could work something out on a refreshment concession...
R those tin snips on a drill attachment or are they they’re own tool
Drill attachment. They work great
@@lawnrebel awesome 👍🏼
What do u do for a living? Just curious..... btw love the channel keep up the great work!!
He mentioned before that he is a contractor of some sort.
🛎
Metal....why not? Contractor ....means nothing. Sub zero or viking fridge, not a carpenter contractor
@@jayhawkmba what? What are you trying to say or convey?
@@lawnrebel we were just curious what you do, outside of play? Perhaps it's too personal
How does that roof jack seal for water against the pipe? I never saw one without a rubber gasket on top of the aluminum.
It's going to need silicone. I asked the supplier for the pipe jack and that is what they gave me. I was annoyed. It was after hours when I picked it up and no one was there to ask for the other kind
@@lawnrebel check these out I have used them in the past to repair leaking gaskets. They come in 1 1/2" and 2", it's much better than having to rely on silicone. Just slide it on and tighten.
www.homedepot.com/p/Creative-Composites-Roof-Vent-Pipe-Collar-Repair-for-2-in-I-D-Vent-Pipe-in-Black-F20/204697316
I'm liking this idea
I've gotta ask, any reason you chose shingles over steel for the roof?. I recently had my house re roofed to steel, so I had the guys do the shed with the same steel at the same time.
Because my house is asphalt shingles and I wanted the 50 year designer shingle look. It has an awesome look. Also figured that it would cost less and be easier for me to install being a novice.
@@lawnrebel right on, well the little I could see they looked sharp!, can't wait to see them when the snow is gone!.
How to: close out a video
Where's the enjoy the blow footage?
I gave that to you. Is it not in the first minute of the vid?
Big fight at 4:57.
Asking for a friend - was this a how-to video?
Heaven's NO
First!
Less Talk and more work Connor, lolol
First
Sorry to Monday morning quarterback......you should cut the backside of shingles to save your knife blade. Also, instead of cutting 5" off, why not cut it in half and use the half every other row? (Half, full, half, full). Much less waste. No need for a tape measure, either.
There is a pattern to these shingles. They are designer 50 year shingles. You have to follow the pattern. There was also very little waste with a single pitch because I used the cutoffs on the opposite side of the roof. Cutting in the back side... Yes. I'm not a roofer and was doing my best. I learned a lot
Have you ever installed that type of shingle before. Not all shingles install the same.
@@benc.8103 Very true. I agree. I was thinking that while looking at the tabs. There's gotta be a way to cut beside or behind a tab to match the next row for a good look. They look like they would flap in the wind.
@@lawnrebel hey, you were following the instructions. Can't fault you for that. All I could think was 5 inches of waste. I've never seen those before.
All I hear from you is " Instructions Instructions Instructions" your such a Jan. (Jan Brady).
I miss the OG Connor who would take them instructions and toss them away.
Ha ha.. Don't you worry pal. You just wait for the next video that I am currently working on right now.
Delete this comment.