Dude thank you. The official video was trash and the whole comment section said it sucked because it did. This is a thousand times better. Way easier. Thank you!!!
have you tried mounting a mic receiver on top of the camera when trying to shoot vertical? I ran into a problem with this yesterday and couldn't figure out how to mount it and shoot vertically without the camera hitting the gimbal. if anybody has any insight I would greatly appreciate it
Well its day two of owning the DJI-SC and this is by far the best tutorial on balancing, great job visually showing us other videos didnt make it visually clear enough where certain things were located on this gimbal. I have the Canon R6 and it can hold it naked but when i mount things on it then its too heavy for this gimbal. Only issue is im stuck with it until sunday after the holidays when i can upgrade to a Crane Lab 3 or Moza Air 3 hopefully your channel has tutorial for those as well lol
_Ronin SC Pan Axis unable to get ''Excellent''_ *SOLUTION* While doing the balance test, I tilt the Gimbal over 25-30°, I then get ''Excellent''. If I immediately balance test again at 15° I get ''Re Balancing Required'', so it is some kind of bug. Just balance-test it at around 30° and it's good. Hope this helps anyone with the same problem. I have spent way too much time trying to solve it before I found out about this and I'm an expert in balancing a gimbal now xD
Woaw before this vidéo I was afraid to touch my Ronin sc. so after this Video. I follow you I like your Video and I’ll share it. I looked a lot video no one was exact like you
I have a canon 77D camera and a 17 - 70M lens My question is: And what to properly stabilize my ronin SC, and what do I need a cage? or even a small tray?
For my part I have a heavy lens 17 -70m And I can't stabilize my ronin sc well My question is: And should I buy a cage to give some weight to the 77D camera and my ronin sc or just buy a small mounting plate?
HI!very nice video!!when i do auto tune and system calibration of the gimbal?i must do again the procedure of calibration from the start when i switch lence?thanks
Hey oma nice work man.... Can you make a video comparison of a6400 vs a7iii using the same Sigma crop lenses on both.... comparing the resolution, derails, Noise levels in photo and video with iso test ...that would be really helpful as it would save me a lot of money to buy crop lenses and use it in crop mode with full frame camera if the difference isn't huge...Thanks Man keep up the Good Work🙏👍
It's the same balance process but make sure to start balancing after the phone is mounted on the top. However, I don't recommend having your phone mounted on the top. It's better to mount it on the side of the gimbal. Cheers
Not bad, but you could do yourself and us a favour and have better lighting! It's black object, and you're filming yourself in a virtually black room!!
RONIN SC ➭ geni.us/roninsc | eBay ➭ ebay.to/346xPs2
Accessories ➭ geni.us/acsroninsc | eBay ➭ ebay.to/2Y6tYHq
Dude thank you. The official video was trash and the whole comment section said it sucked because it did. This is a thousand times better. Way easier. Thank you!!!
hhaah you're welcome :)
This was my thought, i had to come on youtube to figure how to set the pan
No lies were told this was so efficient, finally motivated me to use my gimble again!!
have you tried mounting a mic receiver on top of the camera when trying to shoot vertical? I ran into a problem with this yesterday and couldn't figure out how to mount it and shoot vertically without the camera hitting the gimbal. if anybody has any insight I would greatly appreciate it
Thanks man this is so much easier than the DJI video
Well its day two of owning the DJI-SC and this is by far the best tutorial on balancing, great job visually showing us other videos didnt make it visually clear enough where certain things were located on this gimbal. I have the Canon R6 and it can hold it naked but when i mount things on it then its too heavy for this gimbal. Only issue is im stuck with it until sunday after the holidays when i can upgrade to a Crane Lab 3 or Moza Air 3 hopefully your channel has tutorial for those as well lol
Really awesome video! the rest don’t teach you and they make it hard! You make it very simple and it actually worked!
Glad you find it helpful
Waw@ I have been using this gimble with balancing complications in mode 1, but this process did a great a job , no trembling! Thanks 🙏
thank you oma ghomrawi! this video was such a big help! I am all ready. to do bts-ing tom
Great review, straight to the point and thorough, thanks
Gr8 tutorial man...Found ur channel from Sony Alpha group on facebook. Keep up the quality bro. 👌.
Thanks Ali for the Support :)
Are you from Pakistan ?
@@OmaGhomrawi u welcome bro. Yea m from Lahore, Pakistan.
Ali Umair Official I live in Dubai and have some friends from Pakistan.
@@OmaGhomrawi Ooo gr8 to knw that bro. I hv couple of my school uni mates living in Dubai right nw...:)...
Great video and very clear information, thank you!!
HARD really thank you for your efforts
we don't have a media apartment
_Ronin SC Pan Axis unable to get ''Excellent''_
*SOLUTION*
While doing the balance test, I tilt the Gimbal over 25-30°, I then get ''Excellent''. If I immediately balance test again at 15° I get ''Re Balancing Required'', so it is some kind of bug. Just balance-test it at around 30° and it's good. Hope this helps anyone with the same problem. I have spent way too much time trying to solve it before I found out about this and I'm an expert in balancing a gimbal now xD
Dude we owe you one! Thats genius
Between this and needing to download the apk from the site because the play store version is 2016, I'm about to return this damn thing.
Woaw before this vidéo I was afraid to touch my Ronin sc. so after this Video. I follow you I like your Video and I’ll share it. I looked a lot video no one was exact like you
Glad you found this video helpful :)
Thank you so much! Very helpful!
wow this one is really good! well done!
Would this hold a 3.99 pound camcorder?
I have a canon 77D camera and a 17 - 70M lens
My question is: And what to properly stabilize my ronin SC, and what do I need a cage? or even a small tray?
For my part I have a heavy lens 17 -70m
And I can't stabilize my ronin sc well
My question is: And should I buy a cage to give some weight to the 77D camera and my ronin sc or just buy a small mounting plate?
Thanks for good tutorial i got all excellent 👌
Hi, i bought my SC out of my country, when i turn on the gimball sound a whistle and later turn off. Any body can help me?
HI!very nice video!!when i do auto tune and system calibration of the gimbal?i must do again the procedure of calibration from the start when i switch lence?thanks
Great video
Great job! Super clear and to the point! Thank u!
Hey oma nice work man....
Can you make a video comparison of a6400 vs a7iii using the same Sigma crop lenses on both.... comparing the resolution, derails, Noise levels in photo and video with iso test ...that would be really helpful as it would save me a lot of money to buy crop lenses and use it in crop mode with full frame camera if the difference isn't huge...Thanks Man keep up the Good Work🙏👍
Thank you!
Do you have a video on how to balance it with the phone on the top ?
It's the same balance process but make sure to start balancing after the phone is mounted on the top.
However, I don't recommend having your phone mounted on the top. It's better to mount it on the side of the gimbal. Cheers
@@OmaGhomrawi it would be for the active track.
Should I lock all axis before using?
You should unlock all axis when the gimbal is on
I can't calibrate the pan of the ronin sc?
I tried to advance between 1 and 1.5. and what can you help me please
Send me pictures of your problem on intagram. I will try to figure it out
@@OmaGhomrawi Ok and uh..i sent you on instagram a video and some pictures
Hi Omar when You Start using the gimbal the locks has to be unlock or locked???
Definitely unlock the locks before turning the gimbal on
3 minutes bruh this still took me a year to figure out
Wow Excellent thanks a lot
Is it necessary to auto-tune after such a good balancing?
Personally I don’t autotune everytime. Just once upon a time when I feel the gimbal isn’t working properly.
My problem is when I attach the phone on top of the camera :(
How to balance it in that situation?
It can be balanced with a phone on top of the camera but not that easy
Could you make a video about it please ?
Thanks bro
Thank you
Huge help
Nothing Negative glad you find it helpful
I like this guy
Oh thanks mate!
should i turn on or off while balancing
Gimbal should be off
My camera is perfectly balance but when i turn it on there is still this bumbs when i rotate it
What camera and lens you got ?
Omg this thing is so much harder to balance that the dji S.
thx
Your Video Is not Work bro 🤔...
What happened?
@@OmaGhomrawi this video is not playing well
@@AshishSharmaCinematic check your connection though
@@OmaGhomrawi ok Sir 🙏
Same issue :3
your way is not working for me
no matter what i do, the camera won’t balance
who are you, Dracula?
sooo confused 😂😂😂😂
Not bad, but you could do yourself and us a favour and have better lighting! It's black object, and you're filming yourself in a virtually black room!!
Noted
I’ve done it before watching someone else’s video. Your way didn’t work for me. No like no dislike.
What didn’t work for you ?
you need a translator
You need to get out of the house.
great video