Love the content, keep it up!! I was running the id1050x with my gte and could only make 600 on e85. At 45psi as my base 28psi of boost. Also I had horrible luck with the Mishimoto thermostat. The gasket it comes with was undersized. I talked with Aaron from Driftmotion and he doesn’t recommend them.
Love the feedback! Hoping to to touch 700hp with these IDs at their limit. We’ll see if they work! Luckily swapping injectors is a breeze on this setup! Yeah I ended up ordering an OE gasket, funny you mentioned that! New video dropping tonight 🤘🏻
Good solid clean work , keep it up . I’m thinking of dropping a junkyard velestor turbo into my 5spd 1.6l soul . Cheap eBay intercooler.. leave waste gate open a bit. Maybe you could help me with a budget build? Found a used velestor turbo for 600
What up Matthew! The G Sedan build is on hold most likely until fall. My house is getting rebuilt as we speak and still got a couple things to button up on the SC300. Summers are 80+ hour work weeks for me so no time to mess with it! Content will be back though once I start again!
@@Pete_Tech_ busy man! Good for you though, and awesome I have patience lol I have a 2008 g35 sedan and something as little as that DNA air filter video was such good advice. I ordered them from Amazon last week. I just appreciate your honest opinion and advice. Keep up the work!
This build is sick I want to make this kind of power on my sc300
Love the content, keep it up!! I was running the id1050x with my gte and could only make 600 on e85. At 45psi as my base 28psi of boost. Also I had horrible luck with the Mishimoto thermostat. The gasket it comes with was undersized. I talked with Aaron from Driftmotion and he doesn’t recommend them.
Love the feedback! Hoping to to touch 700hp with these IDs at their limit. We’ll see if they work! Luckily swapping injectors is a breeze on this setup! Yeah I ended up ordering an OE gasket, funny you mentioned that! New video dropping tonight 🤘🏻
Thank God i finally found this vid
luv this shit
Good solid clean work , keep it up . I’m thinking of dropping a junkyard velestor turbo into my 5spd 1.6l soul . Cheap eBay intercooler.. leave waste gate open a bit. Maybe you could help me with a budget build? Found a used velestor turbo for 600
Dooooo it!!! 😅
I have a ge vvti 90,000 miles is there anything major that I’d had to do differently?
How’s the G35/G37 build?
Man I’m just amazed at everything you build you are like a mad scientist “for motors. “ lol
Cheers!
What up Matthew! The G Sedan build is on hold most likely until fall. My house is getting rebuilt as we speak and still got a couple things to button up on the SC300. Summers are 80+ hour work weeks for me so no time to mess with it! Content will be back though once I start again!
@@Pete_Tech_ busy man! Good for you though, and awesome I have patience lol I have a 2008 g35 sedan and something as little as that DNA air filter video was such good advice. I ordered them from Amazon last week. I just appreciate your honest opinion and advice. Keep up the work!
what do you do with power steering since the intake manifold goes where the reservoir is located?
Got a feed relocation kit. You remove the resivor and bolt on an adapter that has a hose barb on it. Then buy a stand-alone resivor and send it!
whoa, never seen the cam position sensor done this way. can you share some more info about that?
Yeah message me on insta @Pete_Tech_YT
Got a link to the throttle body? I have the same intake manifold but dont know which throttle body to get.
This wasn’t direct bolt on, had to oblong the holes. Measure the distance the bolt holes and then look those specs up on eBay!
Will the oem Tps sensor bolts work on that aftermarket throttle body?
No it’s a different thread.
How the driftmotion turbo kit work for you ? I planing to used the same kit for my 2jz na t build
Holds up extremely well, but it’s got a CHRA BB housing and billet comp wheel!
Where Did You Find The Throttle Body
EBAY!
Did you use a gte oil pump or the ge oil pump
Use a GE on a GE, always.
What brand oil filter relocate kit is that ?
Drift motion!
Build list
Insta: Pete_Tech_
Link for oil filter relocation with turbo oil line
Drift motion!!!
Do you live in minnesota???
Yes
Are you over 20K for this swap? minus the car, of course.
This build was about 30ish in parts. Just powertrain.
@@Pete_Tech_ adds up fast.