CB Radios SS6900 With Boots?
Вставка
- Опубліковано 14 гру 2021
- Can you use a SS6900 with a burner?
Please check out my Wish list and anything you may send me will leave me eternally grateful ;)
Rusty's Amazon Wish List: amzn.eu/3TJm7Rf
RustySkull Productions Official Twitter!
/ rustyskullmedia
Check out my other channel Haggard RC!!
You can help me make better content by donating Via PayPal as a gift to RustySkullProductions@hotmail.com!
Or you can use this link: paypal.me/RustySkull
Every penny that is donated will go into making good quality videos for all my loyal subscribers!
Many thanks to you all :)
Uploads are usually on Monday, Wednesday and Friday. Saturday and Sunday uploads are only if I have extra footage on the weekends.
Uploads on weekdays are 03:00 GMT/BST.
#CBradio #SS6900 #CBAmp - Розваги
Nice video Ben, its brilliant to see you getting back on the CB side of stuff and getting back into it, you been a inspiration for allot of people mate getting back into it.. So please keep it up and keep the CB videos coming as you will find we all love and enjoy them very much,, Thanks again..
Good video I got the 6900n think they are good radios and good reports
I tried a friend's 6900n into an amplifier (dummy load), with 35W in it gave 800W out on SSB. Mind you, that was a homebrew 10m linear amplifier.
Lol, I've done the same, so I also keep my meter in line now. It's easily done.
Thanks for this, Ben I really enjoy your videos friendly and informative always
I put 10w into a 203 and get 100w out, on 10m it'll put out 150+ and I think that's plenty.
I have a 300p, 503, 505v & a 703, but not often do any get used, and the 6900n is a great exported 10/11m radio 👍
Mr friend's 6900n v6 looked clean on a spectrum analyser on AM and FM, till it got to SSB. There were some strong spurious emissions on it about 3MHz above and below that fundamental frequency.😱
so you mean that using it with a external AL you can limit that spurious wave?
BRILLIANT video Ben. I will do that at weekend, and might put a tipex mark on the RF power, so I know it's only putting out 4w
Matt loves his handheld doesn't he lol.
I've heard of 14 Wednesday, but never been on it.
Looking forward to seeing next vid.
Stay safe mate.
The RF PWR knob adjusting the watt only on the AM/FM, the SSB will still be about 40 watts on this radio no matter how you adjust the RF PWR knob. So in that case it´s not possible to use a burner because it can take only about 12watts input watt on SSB. The DX 5000 and SS 6900 are not optimal for burners unless you only transmitting on AM/FM that is, so you can turn the RF PWR all the way down to about 3-4 watts.
You can use any radio to talk a rci mobile base galaxy rci radios those radios do have the amuture radio bands in them if you want to talk on the amateur radio bands you will need a amateur radio operations license and you can use a linear if you use a linear you will have to turn the dead key down on the radio and you can use and radio with a linear and you will need a watt meter to see how many watts the linear and the radio is putting out 73s
It tells you on the destructions how much input you can put into the amp , mine is up 10 watts , I took the power/swr out and just eyeball the amperage on the psu to be around 15 amps and mark the rf knob on the radio so you don't go over 9 -10 watts ...I would suggest the 203p from knights ..the other 203 is limited to 1-5 watts on FM which is a bit harder to maintane on these powerfull radios ..🙃Anyway Good Post ...
Nice to see you back mate
Thanks but I didn’t know I went 😂
When I used a 203p and 6900n the swr goes up the longer you press the ptt, take amp out of line and swr is 1.2 to 1.4 across mid block and muppets
SWR will go up with more power, but if it rises during transmission then I’d say you have an issue with coax or a joint, remember if the burner is too hot it will make the VSWR high and eventually die or make the radio die.
@@RSPYT all checks out ok but will redo again. Thanks for the feedback 👍
same for me. with brand new joint..
I’ve heard these are just as good as the styker 955
When I went past your qth I was on low power so I didn't cause you bleed over. Got alot on my little handheld. That's what I mean by not having boots on when you running like a rig with variable power. Accidentally turn up the power on your rig and bang goes your wellies (boots). I will gatecrash your videos another day lol
Haha I’ll call you the gatecrasher
1.4. Wednesdays is a national net that's all over the UK cb Facebook groups!
Blimey glad I turned off lol
Never heard of it either, nit something round the NW Region anyways.
Hi. Do you have to program it to get 27 megs? Thanks, Eamonn.
Helped me a lot, thanks very much. I’m still left with a question though. I have a Cobra 148, the manual says its output on SSB is 12W. My cheap SWR/power meter shows around 22W when I transmit audio. The KL203P marketing info says it can take up to 20W input on SSB (although the manual states an input of 10W maximum).
My question is, is it the 12W as per the radio manual which is the input power, or the 22W shown by the meter (which would be too much)? Many thanks for any replies, guys :)
Hi Ben , Great video as always , I was just wondering if these CRT6900 radios have variable power output on USB & LSB ?.
On mine 4w was at 9 oclock postion
If your radio does 50 watts or more you will have to get a bigger linear
Or just turn the power down lol
THANKS,, DES CREAN.. BELFAST.. IRELAND
does the variable power switch on the front change the power output on sideband on ss6900n? i think you have to go inside the radios and turn down ssb hi rv whilst you're giving a nice constant whistle or audio ??? wouldn't want anyone blowing their burners
That’ll be a different video because some do and some don’t
I thought 4 watts was still a thing for CB ?
Any good aftermarket mic, you have tested ?
KPO NM 532
Hello bruva. You don't know anyone with a stalker 9 to sell do ya please? Hope you're well man
Youve set your camera to Australia's settings😂
Must have done lol
@@RSPYT ha ha, if you can do the same with the 6900 you'll be getting some blinding QSO's!!
I’m still waiting for my present
So am I 😜
@@RSPYT yea but you gotta give me mine .👍
I think it’s stuck in the chimney
@@RSPYT for sure
😂😂