The DX 5000 plus is one of my all time favourites. The NR setting is excellent and makes a huge difference. My understanding is the KPO NM532 mic is electret so I use that setting with mine. Great video by the way . I like this setting for the roger beep NASA style rbf 2550 RBT 300. I set the E-tone for both markers aligned to the 9oclock position
the 6900v7 blue screen is horrible, but the radio did great right out of the box. took the pin 4 sleeve out of an astatic 636L microphone and the audio reports are great. changed settings to dynamic. waiting for these to become available in the states. unsure how to use the programming cable, as my windows 10 says there's port problem. may have to reset radio for programming to work, but playing it safe now, after a problem with trying to program. regularly gets across the pond with under 10w 555usb. thanks for your time and upload.
@@2m0rot crt6900v is a copy. the channel selector has no clicks, but more like slight spots between channels. not quite as smooth as a volume knob, but not far from it. thanks for your answer
@2m0rot yessir. it's smooth enough on this radio, that it skips 2 channels at times. tried going very slow between channels, and that just confused it lol. most of the k-po videos i watch, the click is audible. can't hear a thing on this crt, but the clarifier clicks like the channel knob on a new galaxy.
On your radio. Menu #9. I would recommend you switch your setting to EL (Electret) I think you showed in the beginning of your video you're using the K-po Nm-532 microphone. You will get much better audio reports having your radio set to Electret microphone type. Thanks for making the video. 73, from Michigan USA.
@@2m0rot Quick question, On my CRT 6900N (rev6) using the data cable & software I managed to make each bank 60 channels each instead of just 40. It now has 360 channels. Can the DX 500 Plus do that?
Yes, the programming software is identical as far as I'm aware. The only difference is: There's a mini usb socket on the rear of the DX500+ so you don't need to open up the covers & void the warranty. Only thing is you need a new cable, but the warranty stays intact.
@@2m0rot That's great! I might look into buying myself a DX500+ Thanks again Stu, Hey maybe one day I'll be able to hear you here in West Lothian lol :-)
Just an Anytone 5555 version 1 . Thux radio not getting 25-30 mhz on band switch in radio is a downfall has vd de modified to get 28-29.690 mhz is it's biggest disnfall . However it makes excellent CB band radio.
Hi Stu great video thanks for running through everything about the radio looks like a great peace of kit Can you tell me when on band C will it do 26450 on channel 11 on AM ? That’s what the Truckie channel is in New Zealand we run 26mhz channel 11 I’m keen to buy one of these but it has to do that Cheers Bob
RX noise compander is a filter that takes more of the hash off. The Noise gate works like a Notch filter but without the increments, there's only one setting On/Off.
I'm getting a loud noise and I'm comming threw my radio when I key up how do I fix it please and I need to reset my frequency can you help I knocked it of
It sound like you have the talkback (monitor) activated and getting feedback, turn it off and that should do it. When you move the VFO while sitting on a channel, the radio does not automatically reset when you move away. You'll need to got to the channels again and manually move back on to the frequency it should be on.
Hello, thanks for menu tips. I don't have menu nr.8 - NR (Noise reduction) is that disabled on CRT 6900n? Can i load older firmware or enable that nifty function with software?
The DX 5000 plus is one of my all time favourites. The NR setting is excellent and makes a huge difference. My understanding is the KPO NM532 mic is electret so I use that setting with mine. Great video by the way . I like this setting for the roger beep NASA style rbf 2550 RBT 300. I set the E-tone for both markers aligned to the 9oclock position
the 6900v7 blue screen is horrible, but the radio did great right out of the box. took the pin 4 sleeve out of an astatic 636L microphone and the audio reports are great. changed settings to dynamic. waiting for these to become available in the states. unsure how to use the programming cable, as my windows 10 says there's port problem. may have to reset radio for programming to work, but playing it safe now, after a problem with trying to program. regularly gets across the pond with under 10w 555usb. thanks for your time and upload.
Thanks, you have added massively to my confidence!
Cheers David
Thanks, you explained it to me better than the construction booklet!
Greetings from Germany
Glad it was helpful!
Thank you so fecking much it was doing my head in and now I can look at this video for it 73s 29 JC 001
is your channel knob sloppy or does it click when you change channels? clarifier is solid, but not the channels on my crt
I don't have the radio any more but I'm sure it clicked.
@@2m0rot crt6900v is a copy. the channel selector has no clicks, but more like slight spots between channels. not quite as smooth as a volume knob, but not far from it. thanks for your answer
@@get__some Now that you mention it, it was rather smooth but clicked slightly like a coarse clarifier on a 3900
@2m0rot yessir. it's smooth enough on this radio, that it skips 2 channels at times. tried going very slow between channels, and that just confused it lol. most of the k-po videos i watch, the click is audible. can't hear a thing on this crt, but the clarifier clicks like the channel knob on a new galaxy.
Great video, helped me understand it better than the instruction book👍🏼
Glad it helped.
Nice run through there Stu. I have a Quad 5 from Anytone but was thinking of upgrading to the kpo version. Well done you.
This new version absolutely blows the Anytone / CRT right out the water.
Absolutely brilliant video helped me out loads 👌🏼😁
Well worth a watch, cheers from 14TM007
Thanks.
On your radio. Menu #9.
I would recommend you switch your setting to EL (Electret)
I think you showed in the beginning of your video you're using the K-po Nm-532 microphone.
You will get much better audio reports having your radio set to Electret microphone type.
Thanks for making the video.
73, from Michigan USA.
Thanks Scott, it's set back to Ele now.
Thanks so much Stu. Buying one tommrow 26 kk629
Nice one!
Good job
Thank you 2FL252.
I own a CRT 6900N (Rev6) and I only wish my manual went into this great detail, Thanks for this video.
Glad it was helpful!
@@2m0rot Quick question, On my CRT 6900N (rev6) using the data cable & software I managed to make each bank 60 channels each instead of just 40. It now has 360 channels. Can the DX 500 Plus do that?
Yes, the programming software is identical as far as I'm aware. The only difference is: There's a mini usb socket on the rear of the DX500+ so you don't need to open up the covers & void the warranty.
Only thing is you need a new cable, but the warranty stays intact.
@@2m0rot That's great! I might look into buying myself a DX500+ Thanks again Stu, Hey maybe one day I'll be able to hear you here in West Lothian lol :-)
@@2m0rot you need extra Kabel , or the normal One…
Just an Anytone 5555 version 1 .
Thux radio not getting 25-30 mhz on band switch in radio is a downfall has vd de modified to get 28-29.690 mhz is it's biggest disnfall . However it makes excellent CB band radio.
Hi Stu great video thanks for running through everything about the radio looks like a great peace of kit
Can you tell me when on band C will it do 26450 on channel 11 on AM ?
That’s what the Truckie channel is in New Zealand we run 26mhz channel 11 I’m keen to buy one of these but it has to do that
Cheers
Bob
26.450 is reached by going to band B, channel 34 (26.445) then clicking the clarifier up to 450
Any ideas as to what the noise gate and noise compander actually do ?
RX noise compander is a filter that takes more of the hash off. The Noise gate works like a Notch filter but without the increments, there's only one setting On/Off.
8:15
Hello, how do I turn on the vox function on the radio, it doesn't work, you don't know why? CRT 6600V.
Do you know what amp power supply minimum is needed to power this radio ?
I'd use 20a that's plenty and some room to spare.
I'm getting a loud noise and I'm comming threw my radio when I key up how do I fix it please and I need to reset my frequency can you help I knocked it of
It sound like you have the talkback (monitor) activated and getting feedback, turn it off and that should do it.
When you move the VFO while sitting on a channel, the radio does not automatically reset when you move away. You'll need to got to the channels again and manually move back on to the frequency it should be on.
Hello, thanks for menu tips. I don't have menu nr.8 - NR (Noise reduction) is that disabled on CRT 6900n? Can i load older firmware or enable that nifty function with software?
It's only relevant to the new dx5000
crt 6900v (gen 7) added this feature. haven't got a chance to hear anybody on FM, makes lsb sound underwater on mine
Stu brilliant and buying one soon 26 kk629 Birmingham uk