Great video. What is the purpose of the little squarish grommet gasket on the inner middle of the cover? It looks like it communicates with a port going down the block. Along the top of the cover there are two evacuation channels (?) can you explain what are those? Thank you.
Hey bud thanks for the question, I do not remember or have the part number. It should be the same on a Sport. If there is a turbo it will still basically be the same but you have to remove a little bit more. The 1.5 non turbo is the same…. If turbo, I think you have to remove 1 coolant line, 3 vacuum lines total, plus everything in this vid. Now that I realize I never did a video on a 1.5 Turbo valve cover gasket, I probably will
I actually don’t but I can make one when I get another one of those jobs. For them I like to route the new belt onto the pulleys from under the car with the passenger front wheel off, then I pop the wheel well platic clips and get the belt on mostly every pulley. Then I lower the car and move the tensioner to slip it onto the last pulley. I’ll make a video on it, once I get another 17 accord, good idea man.
Great question, yes. If you pull a coil out and they have oil on them, it’s time to replace the spark plug tube seals. To do so you remove the valve cover gasket and they are located there. Once you remove the valve cover gasket you may as well repalce that also. I have a video on the valve cover gasket if you look in my channel
I charge 1.5 hours for this repair. So 1.5 multiplied by the shop labor rate. Although it may be a different estimate in different shops, some may charge 2 hours
I want to say around 50k-60k? I can’t remember exactly, but these gaskets can go at any time. I’ve seen them go at 13k. Seen some that have lasted 120k with the original gasket!
Wow you are the man. Great tutorial. Perfect information. Thanks
Happy to help my brother!
I gotta bring my car in to the shop. The horn quit working. I think I’m low on horn fluid. 😯
Hahaaa😂 it could be my brother!
😂😂
That would be alarming.
Great video. What is the purpose of the little squarish grommet gasket on the inner middle of the cover? It looks like it communicates with a port going down the block. Along the top of the cover there are two evacuation channels (?) can you explain what are those? Thank you.
You never removed that big harness connection on the back right ????
What was the part number for the valve cover gasket and was this a 17 Honda Accord Sport ?
Hey bud thanks for the question, I do not remember or have the part number. It should be the same on a Sport. If there is a turbo it will still basically be the same but you have to remove a little bit more. The 1.5 non turbo is the same…. If turbo, I think you have to remove 1 coolant line, 3 vacuum lines total, plus everything in this vid. Now that I realize I never did a video on a 1.5 Turbo valve cover gasket, I probably will
My 2015 crv has a slight leak. 155 k kms right now.
Is this after you replaced the gasket?
What do you use to clean the the valve cover at the end ...Brake Cleaner ?
Yes it was brake cleaner, and I use either a plastic trim tool or (very carefully) a flathead pocket screwdriver to remove the old gasket
@@maxsmoviechannel2025 One last Question do you have a video show how to replace the Serpentine belt on a 2017 Honda Accord Sport ?
I actually don’t but I can make one when I get another one of those jobs. For them I like to route the new belt onto the pulleys from under the car with the passenger front wheel off, then I pop the wheel well platic clips and get the belt on mostly every pulley. Then I lower the car and move the tensioner to slip it onto the last pulley. I’ll make a video on it, once I get another 17 accord, good idea man.
We’ll just did the valve cover gasket ….Thanks for the video…worked like a charm .
@@mattgagne9227 hey I’m glad it helped man! Thanks for watching
Does the 2017 Honda Accord have spark plug tube seals to replace?
Great question, yes. If you pull a coil out and they have oil on them, it’s time to replace the spark plug tube seals. To do so you remove the valve cover gasket and they are located there. Once you remove the valve cover gasket you may as well repalce that also. I have a video on the valve cover gasket if you look in my channel
You work for Honda? How much for a job like this there?
I charge 1.5 hours for this repair. So 1.5 multiplied by the shop labor rate. Although it may be a different estimate in different shops, some may charge 2 hours
How many miles was on this car?
I want to say around 50k-60k? I can’t remember exactly, but these gaskets can go at any time. I’ve seen them go at 13k. Seen some that have lasted 120k with the original gasket!
@@maxsmoviechannel2025 thank you!
@@edubb2491 you’re welcome brother