How to TUNE and install SOTF switch 2019-2021 Cummins AT HOME with EZ Lynk
Вставка
- Опубліковано 4 жов 2024
- EZ Lynk tuning from The Diesel Dudes (GDP TUNING) shrsl.com/4ke12
FULL DELETE BUNDLE INCLUDING EZ LYNK TUNER shrsl.com/4ke06
SUPPORT THE CHANNEL, SHOP MERCH HERE: darkirondiesel...
If you have any questions shoot me a message on instagram @darkirondiesel
Comment what truck you’d like to see next!
TUNING AND DELETE PACKAGES HERE shrsl.com/4ke06
SHOP MERCH HERE: darkirondiesel.com/
Quick question is it the same deleting a 68 as a aisin 6sp or what changes ?
I have EZ Link (non-SOTF) on mine (2021) and love it. GDP wrote my tunes and has been awesome to work with. I will say, I HIGHLY recommend getting trans tunes with it. Once deleted mine shifted super early and was kinda erratic. Trans tune got it back to good. This is a great setup for 5th gens!
Yes trans tuning is a must for the 68rfe. I got the trans tuning with this one I just forgot to talk about it 🙄
@@darkirondiesel I agree it's a must. Mine is also 68RFE. Always enjoy your vids, great info!
Are the trans tunes installed with the ez link the same way? Thanks
@@EnduroTrails71 they are separate tune files. The description will say with 68RFE 170psi etc along with the engine tune..
@@EnduroTrails71 hopefully I explained that well enough. You would just install the file that included the Trans tune in it. One flash, tunes the ecm and Trans.
Hey Kyle thanks for all the great videos. I did the 4 " delete pipe w/muffler. Sounds great and runs smooth. I used the EZ-LYNK tuner ans SOTF switch. Hope to do the EGR this weekend. I agree with Gofher7 on the plugs. That was the hardest part I believe. Spray lubing the rubber hangers was a great tip. So here is a tip for you. When pulling the SOFT wire through the throttle cable grommet, spray a little lube on it. Mine slid through effortlessly. The Diesel Dudes were great through the whole process. Thanks Again!
I Did DPF delete on my 2019 Ram today. Used your video for reference and found it helpful, though those damn plugs and their locking method always tries my patience.
I did use Diesel Dudes kit, with the muffler add on and I am pleasantly surprised on the noise from the exhaust. When I looked at the optional muffler it concerned me... it looks like an insulated straight pipe, but it does the job. Truck has a mild rumble. Sounds a little more throaty than stock (of course) but nothing objectionable. My straight pipe and smoke days are far behind me.
Time will tell on the tune. They promised a fuel mileage increase, but I will have to see that to believe it. I deleted my 2014 Ram and saw no difference. My sole reason for the delete was because of the constant emisions trouble I was having. Truck throwing a DPF full code, see dealer every 400 miles or so. I was just tired of dealing with the issues. Will miss the lack of diesel exhaust smell, but I will learn to deal with it. I've driven diesel trucks for 25 years
Thanks for your content Dark Iron!
Awesome videos man, thank you. Ill have my 6.7 Cummins next year and ive been watching your stuff for awhile now.
Thanks man! Pumped for you to get one
Thanks man! Did my 2020 and never looked back. Will give this video to everyone who asks how I did it ...
Appreciate it buddy!
Who did you use to write your tune? My 2020 is on deck.....
@@bunitgarage2657 Optimal Welding. Works great no problems.
Just purchased a full kit with exhaust through your link. Thanks for the detailed video🔥
Kyle, Happy Thanksgiving to you and your Family
Thanks for all the Videos ❤
Thank you, you as well!
I finally made the leap. I took off my exhaust yesterday to try and clean out the DPF. Broke the bolt on the exhaust pressure tube connected to the DPF, couldn’t get the sensors off, and it was a nightmare getting off. Truck sounds too good without an exhaust to clog it back up.
Nice detailed explained video, thanks
Happy Thanksgiving to You and Your family Kyle! Keep up the great work,.Always appreciate all Your videos my friend!👍
Thank you! You as well!
Great install instructions.......and thanks! Mine was showing purple wire in the middle #2. Did yours work with the black in #2?
I have a 16 6.7 PSD, wish we had a cp4 to cp3 recall too lol
Nice rig btw!
Thanks man and ya wouldn’t that be nice
Happy thanksgiving sir, hope you had a good day diezelllllllllllll be expensive o’l son lol almost Mac and cheese status lol but awesome video as always buddy
Haha 😂 thanks man
I don’t even own a dodge lol but your videos are interesting to watch👍
Hey thanks I really appreciate it!
You said make sure there were not any codes prior to installing the tune. However, I saw where you said the tuner can clear the codes also. So can it clear the def see dealer code during then, or does it have to be clear prior?
Can't wait to drive it
So I was sent this same CSP5 for my 2018. But from your 2013-2018 video, you show a switch integrated into the obdII plug. My switch doesn't do anything at all. Do you think I was sent the wrong switch by mistake or should it still work?
I put auto agent 3 on my truck with SOTF right now I have it on 3. What would it hurt to leave it on 5 all the time. I never stomp it to the floor. I just want it there just incase I need to and it’s already done the learning process
I can only select stock or 150hp tunes. Not sure where to find the others?
I have a 2021 ram 6.7 high output aisin trans and I ordered the 5 position sotf and it did not come with that grey adapter to go into the cam shaft position sensor. It just came with a splice kit. They want me to cut up my wiring hardness ? Wouldn’t it be the same as a 2020 6.7
Did you have any trouble linking up with the mechanic technician through email when you first attempted to do so? If there is a solution or a glitch, I would appreciate someone informing me because it is not being recognized.
Ezlynk or EFI? Have a preference when tuning? And why?
Would you say a 10 amp battery charger is a must, or would 8 or 15 amp work? My charger has 2/8/15 amps settings, but I keep hearing 10 amp when it comes to flashing so I'm curious how critical this is. Watching vids and reading install sheets for this weekends project 🙂
8 amp is fine man
Does anyone have the part number for the dash piece he put the switch on? I haven’t been able to find it!
Hi, I’m new on diesel trucks
I have a 2020 Ram 6.7 Cummins and I want to install the EZ Link but I wanna keep with everything on it ( None deleted) what do you recommend to me and also I want to do the Transmission tuning. Thanks
What tuning do you suggest for the ho? My 2020 is super fussy with tunes i have. Nothing works perfectly
Just tuned and deleted my 2019 Cummins, the SOTF fly folder has a bunch of different tunes with TCM tuning which should I use?
If you can, send me a picture on instagram of the available tunes
Will this still work on trucks with the latest US dealer firmware updates on the truck?
Can you keep pedal commander? Or should it be removed
Hey Kyle. My instructions show the purple wire in the middle. Did your wire orientation work for you?
mine also has purple in the middle.
Thanks brother. 💪🇨🇦
the by pass cable that also plugs into the obd 2 port what exactly is that called because i ordered the full delete bundle and i didn't get the same thing you have in the video and will that bypass cable work with the ezlynk auto agent i already have ?
because they sent me the bypass cable where i have to unplug 2 wires from the obd2 port i mean it shouldn't be hard but i rather do it the way you did seemed a lot easier honestly
Might have just not had any stock, but if you go to my channel and recent videos look at the video “how to tune a 2013-2018 Cummins” I use that bypass cable you have in that video
I need to make a trip, 400 miles after de-tune. I won't have my detuner in hand yet. Can I reset the DEF code each time it gets close to creep mode? And get another 175 miles? And if I drive like grandma will I not hurt the engine? 6.7L 2017 ram 2500. Thanks.
No you can’t reset the countdown to limp mode unfortunately
Happy thanksgiving man, looking for a delete for my 23’ 5500. Have you heard of any for the new models? I see up to 22 on their website.
They should have the 2023s fairly soon, but the cab and chassis models like your truck will be a bit longer
@@darkirondiesel yea, most people I talk to tell me I’m crazy for wanting to delete it already but they wouldn’t sell me a warranty so screw it!! Appreciate the response 👍🏽
How I do get trans tunin on my ez lynk?
By any chance do have you the link to the bypass cable you used in this video? Thanks
Bypass cable just came with the kit I linked in description. You could call them and see if they can ship one separately
@@darkirondiesel Yeah I emailed them and they basically told me to screw off and that the bypass cable you used in this video isn't included and that it's sold separately. IDK either way I got one on the way
Do you have a video for a 2016 cummims
You bet, I go over everything in this video How to FULLY DELETE your 2013-2018 6.7 Cummins AT HOME
ua-cam.com/video/mmoK6d6JjAg/v-deo.html
Hey man do you offer customer service via phone? I need help!
Mostly just over my messages on instagram. What do you need help with?
Hello, maybe you can help me solve a problem in my Truck after I did the delet, every time I try to accelerate suddenly the electric stability control turns on, it is a 2500 2022
Make sure the throttle valve is unplugged, other then that I’d say it’s a tuning issue. Who did the tune??
@@darkirondiesel The work was done in a mechanic shop in Houston, Texas, everything goes well until you push it when accelerating and the electronic stability control turns on.
You tune before you do anything?
Yes, on the off chance that something doesn’t go well with the tune or it doesn’t work it’s much better having the truck completely stock then completely deleted.
I’m so tired of waiting for the 22+ to be available without a whole new ecu
Might be waiting a while
Does anyone have the part number for the dash piece he put the switch on? I haven’t been able to find it!