How to wire bathroom fan Extractor fan with timer and Fan Isolator
Вставка
- Опубліковано 16 бер 2018
- Hi this video is about wiring a bathroom extractor fan , wiring fan to the three pole fan switch isolator and pull cord switch. The fan I'm connecting is Manrose Gold with over run timer. Hope it helps in your diy projects. Thanks for watching
- Навчання та стиль
great explanation without the usual fluff
The most clear, concise and straight to the point video about this topic that I have found so far. And I didn't need to look further as all info I needed was here! Thank you for your help.
i agree , well made video
Brilliant explanation, thank you. It reassured me before replacing an existing fan with a new one
Thanks for this. Worked like a charm. I thought the black was neutral like old style wiring and not second live. New fan works a treat now. All credit to you and your easy to follow guide. Thank again
Sometimes you can use the black as earth as well, if you find in the wire brown (L) grey (N) and the black then is for earthing, normally you can find that in the armed cables
Most clear video for this type of installation. As an apprentice i appreciate this so much god bless you
This is how all DIY should be explained.
This is so loud & clear explanation. Thank you & God bless
Thank you.
I’m installing one today. Step by step guide fantastic
Brilliant video. Clear and concise. Thank you for sharing. Keep up with the wonderful work that you do.
Best explanation on UA-cam. Well done. I'm installing a inline extractor with the help of this video
Lovely Polish accent. Dzięki za pomoc. Thanks for help.😎🇵🇱
Fantastic video. So comprehensive and clearly explained.
Thanks so much. Saved me calling an electrician. All working ok. Mega!
You so clearly explain with good intentions. God bless you.
Good intentions? otherwise the cables go into some C4
Thank you so much for this, was extremley clear on what to do, was able to put in a fan and isolator switch without any troubles! And I didn't electrocute myself, so win win.
I watch a lot of these videos and this one is excellent. Thank you very much !
I don’t understand why in switching light are 3 cables. So 1 is 3 core and earth, second is feeding but the third what is?
Perfect. All the information that I needed. Thanks
Extremely good and clear set of instructions
Clear and concise just what i needed. thank you. Subscribed.
Nice bit of how to work again, I love the wago connections they are real quick and easy.
As you say, Wago connectors are brilliant. But be careful where you source them everybody. There are many fake versions which are dangerous. Getting them online is a rusk.
@@negara54 I can't get them to work at college, I'm guessing not one size fits all
Excellent instructions very clear and well presented Keep it up
Your information is very helpful and detailed. Thank you
Cracking video mate. Nice clear simple instructions to follow👍👍
Thanks a ton for your videos my friend. They are really clear and don't cut any important corners and they make things easy for amateurs like me. Keep up the good work buddy.
Seeing actual wires makes the process infinitely more easy to understand than trying to comprehend a wiring diagram. We'll done!
Very clear and thorough. Thank you
Brilliant video, really helpful, thanks
Excellent explanation! Nice job! Thanks!
straight to the point, great video
Dear sir thankyou loads for your most excellent video.helped loads.keep the great bids coming.
All your videos are TOP! Totally clear
Excellent, thank you. Keep them coming!
Brother you doing great job,
Plz keep updating and I fallow you and learn to money things,
Thanks again
Excellent, thanks. Was replacing the exact extractor fan that you have shown, was great help.
Thanks for making video its very help full video to us.
Very detailed and concise explanation. Thank you
Simply and clearly explained. Thank you
Thank you excellent video simplicity at its best!!!
Great upload, thank you !!!!
Excellent explanation and demonstration.....thank you
Excellent, very well explained
please do more video like this one, very well explained and easy for any one to follow. thanks a lot.
Thank you. This really helped me and you explained so clearly.
Excellent video. Straight to the point. Very talented.
Very clear - better than the instructions that came with my Xpelair ...
Very helpful, thank you.
You show a very good demonstration and how it's done. Thank you.
Thank you, great video..
This video shows how to wire fan isolator to the pull cord switch where there is permanent live, switch live and neutral are at the switch. If you have all these 3 at the ceiling rose then you need to connect it there.
hi what is the grey wire for never seen one before. Only one I know is brown, blue and earth (stripped). Thanks.
Jk957 in 3 cord wires cable there is no blue but black brown and grey. So black is Neutral ( blue sleeving ) brown is brown and grey is also live so you put brown sleeving over it.
What if my light switch has only twin and earth ? (Live, neutral and earth)
Dzięki za instrukcję👍
Excellent demonstration, superb
Great videos mate. I'm learning the trade and these are very helpful. Thank you
Such a simple vid but explains what you need to know clearly
A fantastically clear video and explanation
Brilliant video best on UA-cam for sure. Well done and thanks so much for posting. Am doing this job on my en-suite .
Great video. Many thanks.
The use of flat headed screws in this day and age still amazes me.
Yeh does my nut in when people use them. My house is 200 yrs old and when refurbing every screw I found was a flat head made taking anything down a bloody nightmare 😂
The're used in some places to prevent over tightening and splitting the plastic etc 🤷
Does it aye
Absobloodylutely
That's because mains testing screwdrivers are flat, so it would be illogical to use a PZ1 or 2 😊 why carry 2 when you can carry 1
Utterly brilliant, thanks!
Thank you very much ! Cracking video mate.
simple and straight forward.ive seen four utubs .this is to the point and starts and finish from the right places and each stage is simple and concise.i will use this video for my job today .thank you
Great video, clear and to the point.
I missed a little of what you were saying because of the loud music during the installation. It would have been better either without the music or with subtitles! But I rewatched a few times and caught most of what you were saying in the end. Thanks for the video!
found this video very informative.
Good
I have a bathroom fan just like it to install. Thank you.
Thank you just what I was looking for. 👍
Great video! Thanks mate!
Brilliant explanation thanks
Good video for beginners to understand. Would be great to see some explanations about where isolators and fans can be located!
Hi Dans the Engineer. regarding the position of the isolator, according to BS7671, part 7 of the book, Special location, Section 701, every isolator switch need to be installed outside the premise. hope this is helpful. Cheers
Excellent video. Very clear, thank you.
great love the lesson
Good video. I would consider L1 as brown (switching line) and L2 as Black (permanent line) for the fan overrun after the bathroom light is switched off.
Red yellow blue / brown black grey.
Yellow was a permanent on lighting circuits back then. Grey as neutral theses days.
I know the above are the new and old phase colours, and were on a single phase circuit in this video. It’s just an easy way to remember it.
thanks for this. Very informative and clear!
Very helpful and easy to understand...
Thanks for explaining 👍
Very clear video - even I understood.
Love this guy!
Very good easy to follow video, make more =)
Thankyou, much appreciated 🙏
Thanks a lot that was really good
Well explained 👍
Very clear explanation, thanks
I'm glad you left the bit in when the earth sleeving fell at the switch.. too many times!
great just done ours
very clear and very easy to follow
Much appreciated! You just answered a question for me.
Brilliant. I've got the same fan. Thanks.
great work lad
Great stuff mate many thanks your video helps a lot dzieks
Very helpful thank you
Thanks.... Very well explained
Unbelievable works mate
Very informative video 👍
Great tutorial! 10/10
Very informative will be doing this next week will let you know how i get on
Great video, thanks!!!
Very well explained from some other videos I have watch
Thanks very much for taking your time in explaining and the little diagram
Though this was what I was looking for but still HE I THOUGHT THAT HE WAS EXPLAINING EVERYTHING NICELY AND QUITE CLEARLY. GOOD ON YA.
I WAS TRYING TO ASK WHETHER I CAN BRIDGE THE LIVE AND THE SWITCH LIVE ???. NO ONE HAS VIDEOD THAT I COULDN'T FIND??.
Just install a PIR motion-sensor extractor fan. Also known as a room occupancy sensor. That being the PIR motion-sensor function is built into the fan itself thus requiring a simpler Live and Neutral feed.
Great work mate
you should use the Wago 221 sir, they are much smaller than the chunky 222. and they are clear so you can visibly check the ferrel.
Thank you very clear you teach
Absolutely amazing thanks so so much we'll done sir