@@kenandbarbie-b6c I had the rubber tip on the hammer🤣 didn't fill like swapping it out. I use duct tape too but I've taken this down a few more times and it's pretty quick after the first time.
@ they actually come with the gun your and you’re supposed to insert them on the other holes you see depending the foot print you are installing. In the case if this gun the available patterns are for the RMR, Sheild RMSc and Delta pro. Without installing the pins and only using the screws it is more likely for the red dot to get loose.
@@alvinmartinez1322you are correct about the pins and their purpose, why didn't other companies i.e GLOCK, Smith and Wesson, and others think of this method before now❓
@@spaceman063Springfield did the same with the echelon. Haven’t heard complaints about them. Shadow systems uses all the footprint holes on the slide and then inserts that fill the rest of the space in the slide cut based on the pattern, has been rock solid on mine. Plates should be on their way to obsolescence.
agree with you can't wait to see what else u do with her GOODSTUFF still having fun with my ruger max-9 but I will be getting a rxm
It’s a really great shooter. Very accurate too!
@randyreynolds1045 can't wait to try it.
Oh snap. You got one!
@@DesertTactical oh yeah and 399 I love it the most.
@zacsdiyguns Better than any other clones youve tried?
@DesertTactical oh easy
I do like that they made the fire control system but for a Glock. Seems like a perfect evolution of notaglocks
I got one couple days ago put 200 rounds through mine ran flawless . I been done with glock
I’m excited to try it, if it runs my own re man I will be happy🤣 I better buy a box for the video though lol
I need to check it out
@@DougJentzsch you would like it.
Have you ordered an extra grip module yet to make a G26?
I only saw the black g19 one
Holding the frame on the edges of a plastic tray to hammer the pin out might be more difficult because hammering will cause rebound.
@@kenandbarbie-b6c I had the rubber tip on the hammer🤣 didn't fill like swapping it out. I use duct tape too but I've taken this down a few more times and it's pretty quick after the first time.
You gotta use the pins to help lock down the red dot in place.
@@alvinmartinez1322 what pins?
@ they actually come with the gun your and you’re supposed to insert them on the other holes you see depending the foot print you are installing. In the case if this gun the available patterns are for the RMR, Sheild RMSc and Delta pro.
Without installing the pins and only using the screws it is more likely for the red dot to get loose.
Yeah I get that, I didn’t see pins but also didn’t look hard lol. I don’t like how the RMSc is on there, I will run a Rmr, thanks for the heads up.
@@alvinmartinez1322you are correct about the pins and their purpose, why didn't other companies i.e GLOCK, Smith and Wesson, and others think of this method before now❓
@@spaceman063Springfield did the same with the echelon. Haven’t heard complaints about them. Shadow systems uses all the footprint holes on the slide and then inserts that fill the rest of the space in the slide cut based on the pattern, has been rock solid on mine. Plates should be on their way to obsolescence.
I reload. Does it scatter the brass upon firing or does it go in one spot more or less
@@danielfilippini5606 just got it yesterday and tore it down for some other stuff. I imagine it's all relatively close unless it's a gen 3 ejector 😁
This or the psa dagger?
This if I like how it shoots
Looks like they have the Glock specific light mount. Not pic rail.
@@mattknower8073 they should have had a pic rail. Don’t lights have different mounts?
I dislike the term “Glock Slayer”.
@@kenandbarbie-b6c Glock is over rated and over priced.
Not even close
@ got one yet?
Overpriced for sure
399 isn't bad at all, some have been cheaper.