Plastic Welding Method That Motorcycle Mechanics Don't Want You To Know! Learn This And Save Money!
Вставка
- Опубліковано 14 кві 2024
- Hello everyone! You are watching the video "Plastic Welding Method That Motorcycle Mechanics Don't Want You To Know! Learn This And Save Money!". In this video, I'll show you how to repair broken plastics at home and it would be very helpful!
I hope you enjoy watching Inventor SC's video!
On Inventor SC channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
Wish you enjoy the fun and interesting discoveries on Inventor SC channel!
#diy #tips #tricks #inventions #diyprojects #plastic - Навчання та стиль
The repair turned out very well.
For a smooth surface, you can use a hot air dryer. Heat carefully and the surface will smooth and shine again.
This way you can also remove the other scratches.
Hello! Thanks for watching and sharing your great experience! Wish you all the best!
But it will eventually add about 2 days more to the whole process ;)
Я с 1978-го на двух колесах езжу, и уже лет 30 так клею мотопластик. А механики мотоциклов не то, что не хотят, чтобы мы это знали! Они сами этого не знают.
Thanks for watching and sharing your feedbacks! Have a nice day!
Nicely done. If the plastic is ABS - & you have another piece of ABS (an old broken part). Grind it into powder then mix in some Acetone until the ABS has become a paste, you can use this to bond your broken parts together.
Hello! Thanks for watching and sharing your great experience! Wish you all the best!
Bless you. The genius of this, is how so much effort was put into such a simple task. Hilarious, yet inventive.
Thanks for watching! Have a nice day!
@@InventorSC what is the liquid solution over the graphite powder?
@@saloserra5711 Super glue, as shown earlier. San Diego.
Good time, teacher, your works are really beautiful 💖🤌👍🌹 and unique 💖💖
Great job…..
That is the best plastic fix I have seen
Hello! Glad you liked it! Thanks for visiting the channel and sharing your feedbacks! Have a nice day!
Good joke 👍
Reverse soldering tip? Great idea.
Thanks for watching! Wishing you a great day!
Hello, thank you for the tip, very nice work. Good health to you and the entire community. 🙏
Hello! Thanks for visiting the channel and sharing your comments! Wish you all the best!
Super FINE metod )))
Thanks for watching and sharing your feedbacks! Wishing you a great day!
изобретатель велосипеда
Thanks for watching! Have a good day!
это мы интуитивно знаем-понимаем как надо, а иностранцам это показать надо. немецы на дороге открыл капот и получил штраф, так как не механик и ремонтировать не имеешь права, правильно надо вызвать эвакуатор до ремонта, а там тебе дольют например литор антифриза и всего делов.
Merci pour ton travail 🙏🏽
Tu es béni
Hello! Thanks for visiting the channel and leaving your comments! Wish you all the best!
Wow! The way to do it again is amazing. Thank you for sharing
Thanks for watching and sharing your feedbacks! Have a nice day!
I am from Iran, Khuzestan province, Behbahan city and I like your work very much❤❤❤❤
Hello! Nice to meet you! Glad you liked it! Thanks for watching and sharing your feedbacks! Wish you all the best!
00джжжжждхххххх00хх0000❤000хххз0хз❤00жжз00з0000з0ххх ЖД жжж000з0999oo9999❤ooop9òòo9ò0ļ op❤oo hi 00
.lk byvfs❤❤😂😊@@InventorSC
I don’t care where you from it’s got nothing to do with this 🥸
Don't you understand, did I introduce myself to you? @@chespocket1756
БРАВО. ДОБРА РАБОТА
Glad to hear that! Thanks for watching and sharing your feedbacks! Have a nice day!
Tego sposobu nie znałem. Dziękuję za ten film. Jestem z Polski.
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a good day!
Z pewnością najdłuższy i najmniej efektywny, o estetyce nie wspominając 😊
Thanks. This is a very helpful video. I am from Sri lanka
Hello! Thanks for visiting the channel and leaving your comments! Have a nice day!
спасибо, подобный метод показывают всего пару лет в ютубе, ты точно первый ))))))
Thanks for watching! Have a nice day!
Merci from France
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
Excellent repair. Well Done. Geordieland UK
Hello! Nice to meet you! Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!
Saludos desde Barinas Venezuela gracias por compartir
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a good day!
πολυ εξυπνο συγχαρητηρια απο ελλαδα...
Hello! Glad to hear that! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
Good afternoon Thank you for the video. Tell me, what kind of glue is used with graphite in your video?
Hello! It’s just normal super glue! Thanks for visiting the channel and leaving your comments! Have a nice day!
Soy de Valencia. Estupendo trabajo.
Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a good day!
Если тыкать паяльником в места соединения суперклеем ваши глаза вытекут от дыма😅🤣😂
Thanks for watching and leaving your comments! Wishing you a great day!
Много заморочек, полиэфирная смола и ткань, получится броня.
Thanks for watching and sharing your feedbacks! Wishing you a great day!
Great tip about the paperclips!
Glad to hear that! Thanks for watching and sharing your feedbacks! Have a nice day!
slt super top j'aurais jamais penser que le crayon et la glue pouvez donné se résultat, chapeau
Thanks for watching! Have a good day!
Muy bueno amigo , haces magia como siempre 👍👍🙋 . Desde Barcelona
Hello! Glad to hear that! Thanks for watching and sharing your feedbacks! Have a nice day!
Świetna metoda naprawiania plastiku, jestem z Polski
Hello! Nice to meet you! Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!
勉強になりました。4:20に使う針金はZ型にしたほうが外れにくい気がしますが、いかがでしょうか？
Hello! Thanks for visiting the channel and sharing your feedbacks! Have a good day!
Good job! I think you could use at the end black shoe polish pomade to cover all the case. It get a uniform black color
Glad you liked it! Thanks for visiting the channel and sharing your comments! Have a nice day!
What a fine video. Thank you from Canada.
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
Thank you for sharing. From NL.
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
Great repair! Thanks, fm Brazil
Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!
Excellent brother, Wade J. Goodwin, South Africa
Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!
Perfect, what kola did you use;
Glad you liked it! Thanks for watching and leaving your comments! Have a nice day!
8:43 OMG, you're sanding the inside part nobody sees. Hey, see the round little ejection pin mark to the right, left behind by the molding process in the factory? You might want to sand that out too, if you want the back side to totally look great!
Thanks for watching and sharing your feedbacks! Have a nice day!
Ευχαριστώ παρά ΠΟΛΛΥ !!!
Glad you liked it! Thanks for watching and leaving your comments! Have a good day!
Really creative, the video is amazing, I will watch more videos on your channel and learn.🎉🎉
Thanks for watching!
Malin !!!!! Merci !☺
Thanks for watching and leaving your comments! Have a nice day!
Я клею супер клей и сода. Быстро и надёжно.
Thanks for watching and sharing your feedbacks! Have a good day!
What kind of glue did you use? I do plastic repair occosionally. It would help lots if you would let me know. Thanks.....
Hello! It’s just a normal super glue and you can buy it easily! Thanks for watching and sharing your feedbacks! Have a nice day!
Μπράβο....πολύ καλή δουλειά.Μου άρεσε πολύ.Θα το εφαρμόσω σύντομα.Να είστε όλοι καλά.!!😀
Hello! Glad you liked it! Thanks for watching and sharing your feedbacks! Wish you all the best!
Эстония ❤ зачётный видос 😂
Hello! Thanks for visiting the channel and leaving your comments! Have a nice day!
Greetings from Greece - great job!
Hello! Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!
Teversing the standard soldering tip rather than building a new one is genious.
Thanks for watching! Have a nice day!
hello, with abs juice made with abs parts and acetone it's also good ;)
Hello! Thanks for visiting the channel and leaving your comments! Have a nice day!
Sehr gut gemacht.
Hello! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!
I used the same plastic type to repair a burst radiator that was no longer in production. It was polyprop carbon fibre mix. Used the similar stalling then followed on with 22gauge copper mesh heat set not the plastic. .Benn working for a year so fsr.
Thanks for watching and sharing your great experience! Have a nice day!
Muy bueno soy de España
Hello! Nice to meet you! Thanks for visiting the channel and sharing your comments! Have a good day!
fine job !
Thanks for watching and leaving your comments! Have a nice day!
Jaú SP/ Brasil
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a good day!
Ты красава. Уважаю.
Thanks for watching! Have a nice day!
very good, from Sheffield UK
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
Pretty cool!
Very clever repair! Well done 😊👍🙏
Hello! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!
Rattle can satin black would be nice.
Thanks for watching and sharing your feedbacks! Have a nice day!
When you finished get some metal cleaning liquid ‘Brasso’ and polish it up you will get rid of that dullness where you sanded! Tooth paste will also do!
Thanks for watching and sharing your feedbacks! Wishing you a great day!
The break is now the strongest part of the bike. I have to say though ...there was LOTS of repetition... for example...we didn't need to see the part fits on the gap 3 times..I think it could be shorter ...and the music.... don't even get me started!!!
Thanks for watching! Have a nice day!
Il vaut mieux tordre les tiges en fer, en forme de S, pour avoir une meilleure accroche; une meilleure tenue.
La colle cyanoacrylate ne résiste pas longtemps à l'eau : il vaut mieux préparer de la colle époxy. Pour cela il faut rendre la surface rugueuse - c'est le contraire avec la colle cyanoacrylate, où cela doit être lisse.
Avec des petits brins de fibres de verre ou de carbone dans la colle époxy c'est beaucoup plus solide encore. La fibre de carbone peut être achetée en tissus pour le tunning des automobiles. C'est un peu plus cher mais il en faut très très peu et c'est dix fois plus solide que l'acier.
Thanks for watching and sharing your feedbacks! Have a nice day!
Забавно конечно, но проще купить паяльник для бамперов за 15 долларов и не мучаться, либо купить дихлорэтан и заклеить за 2 минуты, оставить до утра, будет видна только маленькая паутина, для закрепления намазать потом ещё раз и всё.... даже шкурить потом не придется по сути
Thanks for watching and sharing your feedbacks! Have a nice day!
Desde Madrid, España.
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
Could use a lighter to achieve final finish after surface is level
Thanks for watching and sharing your feedbacks! Have a nice day!
Où se procurer la petite pipette que l'on voit sur le tube de super glue ?
同じ修理方法を今年に入って幾つも見ましたよ。
Thanks for watching! Have a nice day!
глас из србије --- добар посао ...
Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!
@@InventorSC thanks , you tu ...
It will be most strong place in whole moped
Thanks for watching! Wishing you a great day!
Индийские руки это почти китайские)
Thanks for watching! Wishing you a great day!
Fine. Rio - Brazil
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
From France !
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
I am from Brazil
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
on smaller more delicate parts you can use staples
Hello! Thanks for watching and sharing your feedbacks! Have a nice day!
Nice job. But WD-40 is used to remove adhesives. So, while the WD-40 may shine the plastic it’s likely to weaken the glue once it penetrates the plastic.
Hello! Thanks for visiting the channel and sharing your feedbacks! Have a nice day!
Excellent ! +++++
Glad to hear that! Thanks for watching and sharing your feedbacks! Wish you all the best!
Thanks
Thanks for watching and leaving your comments! Have a nice day!
Use brakefluid,,on plastic,,being shiney..😆
Thanks for watching and sharing your feedbacks! Have a nice day!
Hola. Habría que haber pasado la lija al agua. Pero hay un método mucho mejor que es el soldar realmente las dos partes con CLOROFORMO que funde el plástico y lo suelda muy bien. El cloroformo se utiliza para soldar acrílico transparente y es invisible.
Hello! Thanks for watching and sharing your great experience! Wish you all the best!
Intéressant a plus d'un titre
Thanks for watching and leaving your comments! Have a nice day!
But at least the music was nice 👍
That's assuming you managed to recover the broken chunk... And you're loosing all the patterns of the skin you're sanding. Nice detail in arming the break with paper clips.
An alternative is to make a "plaster" with salt dough or galalith that you can customise when it's dry, coat it with paint or varnish and simply pour melted plastic on it (optionally putting a fabric mesh in it.).
Thanks for watching and sharing your feedbacks! Have a nice day!
Bon resultat si tu veux tu peux repasser toute la pièce avec du cirage a chaussure noir, comme neuf;;;;;;;;
Hello! Thanks for watching and sharing your great experience! Have a good day!
А крупный кусок тоже выдержит таким способом?
Thanks for watching and sharing your feedbacks! Have a nice day!
Et la p'tite finition des micro rayures au décapeur thermique, alors ?
Thanks for watching! Wishing you a great day!
mantab bang lanjut
Thanks for watching and leaving your comments! Have a nice day!
ווואלה מקצועי בלד
Hello! Thanks for visiting the channel and leaving your comments! Have a nice day!
For the love of God I would have bought 2 parts after knowing the process is so labour intensive.Still brilliant ingenuity.I do believe the motorcycle companies do want you to know how hard it is to repair it at home because you will be lining up to buy spare parts.
Thanks for watching! Have a nice day!
Apply Superglue thicker and sprinkle with baking powder. Then you don't need the soldering iron.
Hello! Thanks for watching and sharing your great experience! Wish you all the best!
Bardzo pomysłowe 😊
Glad to hear that! Thanks for watching and leaving your comments! Have a nice day!
muy bueno
Glad to heart that! Thanks for visiting the channel and leaving your comments! Have a good day!
superglue-Sekundenkleber?
Thanks for watching! Wishing you a great day!
Na minha opinião , seria mais prático colocar uma peça nova .
Thanks for watching and sharing your feedbacks! Have a nice day!
... or you could wait for a new part to arrive and spend 5 minutes undoing 2 screws, swapping over the parts and replacing the 2 screws.
la poudre noir venant de la mine de crayon , c'est du graphite et pas du charbon de bois. Et tu le mélanges directement avec de la colle super Glue ( ou colle cyanoacrylique ).
Mais tu peux aussi mélanger le graphite avec du bicarbonate de soude avant de coller avec ce mélange et de la colle super Glue. Et là, il y a une réaction chimique qui fait que tu peux à peu près tout coller ensemble ( bois, fer, plastique, etc. ). Voilà ... A plus.
Thanks for watching! Wishing you a great day!
Very well down!!!
Thanks for watching! Have a nice day!
одлична идея....
Glad you like it! Thanks for visiting the channel and leaving your comments! Have a good day!
Nice i am from Holland
Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!
Bevor Du das Video gemacht hast , hast du bestimmt 3 Dosen Bier getrunken 😂😮
Thanks for watching! Have a nice day!
Паяльник и скобы?Да не не слышал.
Thanks for watching and sharing your comments! Have a nice day!
нихром все же лучше, чем скрепки. С внутренней стороны пластмасс сдираешь и с наружной феном плавишь, потом наждачкой ровняешь и красишь баллончиком всю деталь :)
Thanks for watching and sharing your feedbacks! Have a good day!
You can get paperclips that don't have a plastic coating that you have to scrape off, you know.
Thanks for watching and sharing your feedbacks! Have a nice day!