Aeroponics Cloner Update! Propagate Plants Fast & Easy From Cuttings!
Вставка
- Опубліковано 6 вер 2024
- In this video Dan from www.PlantAbunda... gives you an update and offers advice on the "Clone King 36" aeroponics cloning machine.
Clone King 36: amzn.to/1T5nrFr
Nature's Solution Mycorrhizae: amzn.to/1WSSOBq
Grafting Knife: amzn.to/1KBkFQ6
DIY Indoor LED Grow Light Stand: • DIY Indoor LED Grow Li...
I bought the Clone King and I put rose cuttings in it. On day 28 I was able to pot up 4 rooted cuttings. The rest are taking longer but they do look like they are rooting. It is an amazing machine.
Nice! I just bought the same cloner (Clone King) to do work with American Hazelnut and other woody edible propagation work. Also trying various dormant hardwood cuttings. I just bought mine and have only had it running for two days, so I can't describe any results. However, a couple things I am doing differently are: using a tall (18") dome to cover 25 of the 36 sites to control humidity levels as a test to see what works best. Using a titan 12 control timer that allows me to adjust both on and off time for the spray unit (I am using 1 minute on, 3 minutes off). Also on the timer I am using an air stone from my compost tea setup that is one air pump attached to 4 air stones to further aerate the water. Lastly, I am using element nutrients cloning gel to dip in, and low levels of clonex nutrient/hormone solution in distilled water. I will be sure to share any results (good or bad). Would love yo see some more perennial experiments with this! Cheers.
Best info , no waffle , good camera work , an old granny in England thanks you , I grow houseplants for e bay
This kind of video is so valuable because you learned a valuable lesson and shared it with others contemplating aeroponics. Thank you!
This is one of the most straightforward, well explained videos, and at least it shows the wrong way and the right way.
I actually add a small amount of bleach to my cloner when I add new cuttings. This allows me to run the system warmer, which tends to help me root faster without developing any sort of infection. Prior to this, I was adding beneficial bacteria, fungus, and enzymes - which was surprisingly less effective than the sterile method.
Letting fresh cuttings soak prior to being placed in the cloner can help prevent embolisms, and increase success rates.
i start my cuttings in an aquaponic setting. i also get roots at about a week or so.
Great idea with the saran wrap. So water don't splash all over without collars installed while cleaning. Thank you P.A.!
If the pump is causing too much heat, use a timer , 15 mins on, 30 mins off to prevent heat build up
Wonderful result. I as a few others feel that the humidity was too much. Using a timer would be even better.
Add a little compost tea to your water, I added two red solo cups stained into about 2 gallons of water. My root sprayer is home made in a five gallon bucket with only one sprayer. Turn a half turn in the socket every day. It helped my plants come back from the dead. :)
If you use a little bit of cloning gel , nutrient, and clear rez things will be much much faster and no rot. I use ez clone stuff, but there is many options out there.
Hi, I am late here, but good video. One thing I can tell you is you don`t necesarily need to "dechlorate" the water, that helps you to keep it free from a lot of pathogens.
3:53
Allowing the tap water to sit does not ensure off gassing as some townships use Chloramine which does not evaporate like Chlorine will. That being said neither Chloramine nor Chlorine will hurt your cuttings and will only server to discourage bacterial growth.
Also on the heat situation, it looks like your aeroponics system is on a shelf above some lights.
Excellent info Dan! Thanks for sharing the update & your results. I'm glad the setup is working out. xD
I played your two movies to my Master Gardeners Good Job
been a few minutes since you made the video... yet like all great knowledge, it still grows well over time... thanks for sharing the insights and experience to a better prop box turnout... #Appreciative
This is a very old video. Did you continue to use this item or have your practices changed and why. Sounds like Great new video in the making.
I'm just pondering if the heater had a thermostat and the pump produced heat the thermostat should turn off at the required temp
Excellent I'm going aeroponics for my cloning from your video
Good👍 information for 🇮🇳India people 🙏🙏
Did you leave the plastic on? I just got one,and there's no way to adjust the water ciming thru,so it's spraying too high
thank you so much for the time you put into making the video. I am trying to build one for cloning. I've heard vitamin c is good to use to assist with rooting. Have you tried this?
How do you keep it from leaking out from under the edges of the tote
Do you live in some cold place? 68-72 F (or 22C) is quite cold isn't it? Where I live, in India, this temperature is only seen during monsoon/winter nights!
is it any different ppm for aeroponic and hydroponic?? , please answer , thanks
Hey this was really great at helping me troubleshoot! thank you so much!!!
Thank you
I got a oxyclone for 60 bucks and adding 2 air pumps with 4 stones works like a charm all under 90$
Nice! Does the water get dirty after some days? Do you have a water filter inside it? Or how is that working?
So just water. No rooting hormone or fertilizers, correct?
Can you use this with new seedlings thanks mate from Australia
Can u use this for pepper plants like hydroponics
What you set your interverials for on off pump settings?
Blue lab work too
hi when u say ph raise//u mean over time water become acidic or alklaine?
Are the sprinklers running the whole time?
Great video, thanks!
Thank you! I bought a prop and so thanks for the info!
Double like for the dogs running around.
Try using a fogger bud.
Such a good video. Thanks for the information.
you need to use a cycle timer. one minute on, 2 minutes off. Your water will get to hot if you don't.
I see a carboy! Do you grow hops as well?
Thank you .. very inforative video ... benefited a lot .. good work!
what temp do you recomend having the water
You the man!
can we do this sistem in the chilie tipe.
I got to try this out some day!
thank you for sharing.
Exact same problem, all cuttings rotting mush, cant get roots at all after 4 attempts
If you have a clone king just contact the manufacturer... ME and I'll tell you exactly what is wrong
I have been thinking about getting into this for veggies but when I search to see what plants are best suited for this method I find nothing on it. Any directions?
Before I bought mine a few weeks ago II procrastinated buying one for over a year. I truly wish I would have bought this early last spring. I did a general plant cloning search on youtube to get ideas of what can be rooted or cloned.
Great Video
Excuse me, Im sorry for asking this. Would you permit me to take several seconds of the video for my task?? I will put your copyright on my task. Thank you for your attention, im sorry for impoliteness
give your roots some help with Clone X
I hope this comment finds you, and finds you well! hahaha thanks for your video. Nice work!
I'm good at reviewing all well balanced life. Keep your mix of the co2 and like if you put dry ice 🧊 and put it inside a Artic Air and add a little bit of water 💧 and dry ice for byproduct is CO2. Ppm needs to be less than 148ppm
🤔
hectic tunes bro.
WOW bleach.
buy PH pen > profitz
You are on point and you clone the same way as I do it but my setup is a bit more advanced. I LOVE YOU SYSTEM BECAUSE YOU HAVE MAID/R&D WORK YOUR SYSTEM SEND ME A MESSAGE IF YOU WANT TO TALK/NETWORKING AND GET ON THE FORBES WEBSITE. I BELIEVE IN YOUR KNOWLEDGE AND WE ADD WHAT I HAVE THAT WILL HELP TO MAKE THE BEST ONE ON THE GLOBE. DIY ADD A CO2 ENRICHMENT PURGING INTO YOUR WATER TANK AT THE LEVEL WERE WATER SPAYS AND INTO THE OPEN AIR PART OF YOUR TANK. ~PURGING 75 / 125 PPM AND PUT IT ON A TIMER TO PURG EVERY SETTING ( DEPENDING ON WHAT YOU ARE TRYING TO CLONE) . EXAMPLE; TOMATO PLANTS) SET THE TIME AT EVERY 12 HOURS AND YOUR CO2 AT ~~ 75 PPM FOR 48 HOURS THEN INCREASE BY DAY ~20% .LET ME KNOW PLEASE IF YOU WANT TO NETWORK ON BOTH OF THE SYMPTOMS/ YOUR SYSTEM .MY SYMPTOMS. YOU HAVE KNOWLEDGE THAT I DON'T I HAVE KNOWLEDGE THAT YOU HAVE NOT YET APPLIED TO YOUR SUPERVISOR CLONING MACHINE.
WHAT CAN IT HURT BY USE HELPING ONE ANOTHER. LOVE YOU VIDEO I DID SUBSCRIBE.
Why would you want to put CO2 into the root zone? Roots need oxygen, not carbon dioxide.
@@tombryant4518 Thatnk you Very much for your kind ❤ 🙏 feedback. Can't explain why, under Contract...
@@bkilpatrick1909 Makes no biological sense. Supplement the leaves with CO2, not the roots. Especially at night when they reverse and consume oxygen and produce CO2 like us. Whatever system you’re talking about is actually below my normally occurring 750ppm atmosphere anyway so it wouldn’t even do anything, unless you’re meaning to add an additional 75-125 ppm to the existing level?
Never said anything about that 💯 % sure not why you have me on this platform so try (
@@bkilpatrick1909 I’m just trying to understand what you’re trying to say. Please explain how adding a minuscule amount of extra CO2 to the root zone will aid plant growth. If you’re not able to explain the theory behind the system due to “contractual obligations”, or a non disclosure agreement, then it’s pure bro science. There is lots of BS out there these days, and it’s getting a little harder each year to wade through it all. I’m all ears and willing to learn something new though, but what does it do exactly?
This aint aeroponic
Nice sir ji🙏🙏
Thank you! I bought a prop and so thanks for the info!