BMW E91 Front Wheel Bearing Replacement. Step by Step Guide

BMW E90, E91, E92 Front Wheel Bearing Replacement
Link for Rear Wheel Bearing Replacement: • How to Replace BMW E91...
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done at your own risk. I will not be held liable for any injury to yourself or others or damage to your firearms or any equipment resulting from attempting anything shown in any videos.

[@dancotube]

Easy to understand and shows effort you have to put in replacing it.

[@carrepairandtoolsvideos]

Thanks and appreciate your feedback.

[@evensisftw]

Thanks, I must have watched your video 5 times before actually doing the job. Heating up the loctite with a blow torch helps a ton with this. Car is so much quieter since installing. Without concise videos like yours, I would have been lost. Thanks a ton. I bought a FAG wheel bearing kit, which had replacement bolts with loctite 270 on them already.

[@carrepairandtoolsvideos]

I am glad that video helped you. FAG parts are quality. Its good to change the bolts with the new which is nice you got new one with the part. You are right, without torch heating the bolts can be hard to remove. Appreciate your feedback.

[@diecksl]

Hands down the best video on how to do it, with all things that will go wrong

[@carrepairandtoolsvideos]

Thanks and appreciate your feedback

[@suj1945]

Nice work bro

[@carrepairandtoolsvideos]

Thanks bro

[@trevorquinton5393]

Those bolts behind the strut tower are insane! Rust is just brown threadlock right lololol

[@carrepairandtoolsvideos]

You are spot on bro :D

[@peterwalton5768]

You could have used a heat gun to loosen the locktite. Heat to 50 degrees celsius. Apart from that, great guide.

[@carrepairandtoolsvideos]

I did not had heat gun at that time. But yeah, heat helps alot. Thanks for sharing your knowledge

[@humbertofonseca8563]

Excellent video

[@carrepairandtoolsvideos]

Thanks bro!

[@adnanfile]

nice video thanx . keep up the work

[@carrepairandtoolsvideos]

Thank you

[@sarmadaakash5437]

Really Helpful 👍👍

[@carrepairandtoolsvideos]

I am glad it helped 👍

[@robertwootton2161]

Yes heat would soften that threadlock

[@carrepairandtoolsvideos]

I did use torch in another bmw and heat made a big difference.

[@kkshangla]

Outstanding

[@carrepairandtoolsvideos]

Thanks buddy

[@gplusgplus2286]

Very nice video but don't buy the "Ridex" or "Stark" brands from autodoc they are chinesium crap, get good bearings like FAG, SKF, NTN, Timken etc.

[@carrepairandtoolsvideos]

I was on budget so I bought the cheapest I can get. But I thought Stark is good. Next time, I will avoid these chinesium.

[@teodormihai2244]

How many nm did you tightened the bolts ?

[@carrepairandtoolsvideos]

I think it was 120 Nm for wheel bearing bolts. Red thread lock is also recommended for these bolts.

[@youngjedi9199]

Is the same for x drive models?

[@carrepairandtoolsvideos]

I wouldn't say exactly same but pretty much same principle rather.

[@matthewwheeler8215]

What is the torque for the bolts?

[@carrepairandtoolsvideos]

Its 120 Nm/88.50 lb-ft

[@matthewwheeler8215]

Thanks for the quick reply, great video very helpful 👍

[@emanuelwatches1226]

do you have instagram?

[@carrepairandtoolsvideos]

Unfortunately no, but i am considering to make one for this channel in future. If you have a question, you can ask here and I will try to answer to best of my knowledge.