How manay hours or days this repair. actually I'm your number 1 fan. I am a dent technician here in the Philippines. I always watch videos so you can get a technique, idea or style of making dents. for me you are one of the master dent technicians that I admire... 👍🏼👍🏼👍🏼💪🏼💪🏼💪🏼💪🏼
I hope that through your videos I can learn and improve my skills. And also hope that you can share your experiences when encountering stretch marks in corrugated iron, thank you.
No cualquier técnico es capaz de aceptar un trabajo asi ni tampoco es capaz de dejarlo con esa terminación en ese tipo de vehiculo. Con herramientas basicas. Mis respetos. 💪💪💪💪💪
Very nice Ken. Question.... How did you get the bottom part fixed, the frame crease which is extremely difficult to flatten down? I had a Tesla dent similar the other day and I heated it right up and tried pushing a blade edge whale tail bar in to try and split the adhesive but with no luck. I know it's tough bonding from when I was a panel beater and use to do door skins. Would be great for any pointers or guidance Thanks Martin 🇬🇧
@@DentDiscountPDRBodyShop thanks mate. Did you literally rip it from the internal glue then? Sounds like the only option but a “balls in” approach! Loved the lateral frame too I had something similar in mind 🙌🏼
So much pushing and tapping to be done, yikes. Great repair, while maybe not as spectacular as heavier dents that you've posted this one is top work as well! Thanks for sharing, videos like these make me optimistic about anything being possible in life, haha.
Would be good to see more detail when knocking down and using rods. The shapes of tips applied to surface and motion and force used. Get some close ups and dont rush through that part as its the most finicky and important. I feel confident to pull a major part of a dent easy enough but the finishing looks much harder.
Im curious in what glue you used and the key to keep it sticking so well? I bought a mini kit with the black and yellow glue stucks with a slide hammer, it comes right off the second or third slam. I see you really putting some weight on those tabs and it seems to stick so well.
Hey brother. I am new to the channel. Much respect to what you do - pretty awesome! I got a dent on my truck that I am "puzzled" with. Is there a way I could get an advice from you on what to start with and "which way" to pull?
@@DentDiscountPDRBodyShop fair enough, thanks. I got an audi q5 that I bought after accident, I repaired it myself, but there's still a big dent under the rear left light. I was thinking about replacing the whole trunk gate, but it's not worth it at this point.
@@DentDiscountPDRBodyShopGlad to hear that has not happened. Knock on wood that it doesn't. I dont want to see a video of bloobers. keep up the work. 👊👊👊
tezla, scammers, give me back my money for not delivering the vehicle to me and for scamming me out of the costs of accessories for this scrap metal, I will advertise for you until I get my money back and by the way, this happened in February 2022
Absolutely love your artwork!! I definetly want to take your training 💪
PDR training site
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Even though I've seen you do this many times, it still blows my mind. That panel was trashed! Great work, Ken!
Wow, thanks! Thank you so much for your comment. I really appreciate it.
You truly are an artist! This goes above and beyond standard body work. This is an art form, and you, sir, are a true master of your craft!
Thank you for the great comment. I really appreciate it.
Superman, you make this look too easy.
First nation. Thank you for your comment. I appreciate it.
@DentDiscountPDRBodyShop Your absolutely the best.
NOICE! It's therapeutic to see a pro at work.
Best PDR guy in the world.
It does not matter how many you tube videos someone watches on this. It’s definitely NOT a DIY thing. You are what they call… A professional 🫡
Thank you for your great comment
Honestly man
The second step is damn near art.
You never cease to amaze me
Earl thank you for your comment
Genius , .. saludos de Córdoba Argentina
Martin thank you for your
Comment
incredible work Ken...wow!
Luc thank you
Wow, you are a metal whisperer! Super job there.
PD thank you for your comment
How manay hours or days this repair. actually I'm your number 1 fan. I am a dent technician here in the Philippines. I always watch videos so you can get a technique, idea or style of making dents. for me you are one of the master dent technicians that I admire... 👍🏼👍🏼👍🏼💪🏼💪🏼💪🏼💪🏼
Two twelve hour days
I'm new to this profession and I really admire you
Welcome to my channel
I hope that through your videos I can learn and improve my skills. And also hope that you can share your experiences when encountering stretch marks in corrugated iron, thank you.
You Truly have a gift for this ! ! ! ! !
Thomas, thank you for your comment
This is great artwork ❤
Really impressive. Congrats!
Thanks a lot!
No cualquier técnico es capaz de aceptar un trabajo asi ni tampoco es capaz de dejarlo con esa terminación en ese tipo de vehiculo. Con herramientas basicas. Mis respetos. 💪💪💪💪💪
Victor thank you for your comment
Cool video what about a dent in a old car or truck with some real metal ?
Great work!
Thank you I appreciate that
Very nice Ken. Question.... How did you get the bottom part fixed, the frame crease which is extremely difficult to flatten down? I had a Tesla dent similar the other day and I heated it right up and tried pushing a blade edge whale tail bar in to try and split the adhesive but with no luck. I know it's tough bonding from when I was a panel beater and use to do door skins.
Would be great for any pointers or guidance
Thanks Martin 🇬🇧
What’s up buddy!! how are you doing Martin?
I did use a lot of glue behind the scene to raise it up and knock it back down.
A lot of blending.
@@DentDiscountPDRBodyShop thanks mate.
Did you literally rip it from the internal glue then? Sounds like the only option but a “balls in” approach!
Loved the lateral frame too I had something similar in mind 🙌🏼
Wow. Great job
Del thank you
Excellent video
Thank you
Thank you very much
my Friend
Manuel, thank you for your
Comment
great man and perfect work to pdr❤
Thank you Mr. Show for your comment
You are "Da GOAT"
Thank you
C'est le principe du Miracle Système mais en colle, magnifique,bravo,la colle doit être de très bonne adhérence, patience/dextérité/expérience 👍👏👏👏👏👏💯
Thank you for your comment. I really appreciate it.
So much pushing and tapping to be done, yikes. Great repair, while maybe not as spectacular as heavier dents that you've posted this one is top work as well!
Thanks for sharing, videos like these make me optimistic about anything being possible in life, haha.
Yes, you’re absolutely right lots of pushing and tapping. Thank you for your comment.
This is amazing work! You are a magician! 👏👏👏
Tesla DIY thank you for your comment. I appreciate it.
Great job sir. Love your work. I still a long way to go😊
Thank you for your comment
The man of steel
Chris, thank you for your comment
Killin’ it, my PDR brother!!💪🏻
From you that means a lot thank you, Mr. Kelly
Awesome - looks better than out of the factory 😂
SW thank you for your comment
Is it possible to share the cost of every repair? It would be very informative.
Thanks man if Steele.
GOOD JOB 😊
Thank you
Good job! Those wrinkles looked like they might be trouble .... but hey!
Thank you for your comment. Yes, the wrinkles took a lot of work to flatten out and smooth.
I appreciate you sharing on my channel
Would be good to see more detail when knocking down and using rods. The shapes of tips applied to surface and motion and force used. Get some close ups and dont rush through that part as its the most finicky and important. I feel confident to pull a major part of a dent easy enough but the finishing looks much harder.
As always. Boom!
Craig thanks
Beautiful work! How did you get rid of the small outward dents?
Adam, thank you for your comment. Once I pull the dents the high points disappeared after I knocked him down.
This is like 100 steps.
But you did a good job explaining.
Lol Thank you for your comment
You guys are magicians 👍🏿🤪
Thank you for your comment
The man that Steals is BACK
Thank you for your comment.
I have 35 new short videos as well. You can check out that are new.
@@DentDiscountPDRBodyShop still the best PDR tech on UA-cam ✌🙏💪
Great job as always
Thanks again!
Amazing!
Thank you
Impressive 🎉
David thank you
Very complicated pull... nice
Mark thank you
Im curious in what glue you used and the key to keep it sticking so well? I bought a mini kit with the black and yellow glue stucks with a slide hammer, it comes right off the second or third slam. I see you really putting some weight on those tabs and it seems to stick so well.
Awesome! 😍😍😍
Delta Johnny thank you
I miss your videos my brother🇺🇸🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
I have another one coming soon. Thank you for your comment.
Boy do I have a test of your skills! Can’t post pics but if you can fix this aluminum body you will probably get huge amount of views
Good work, waiting for the repair on that Rivian. He's got like $50k in damages.
John, thank you for your comment.
Man of the steel ،💪
Mohamed thank you
Good Job,only thing left Is that some good painter spray your "paintless repair,,"30 years ago what you Are doing was called panel beater.
You are absolutely right thank you for your comment
Do you have a go to set of pulling tools to start? Any real recommendations on it would be appreciated if you don't mind. Thanks!
Go through all my videos you’ll learn a lot. Thank you for your comment
@@DentDiscountPDRBodyShop I WILL, but do you have a certain brand of tool/kit you would recommend?
Good job
How much did you estimate this work?
3-5K if it’s slow or or if a customer cancels just to fill the spot I’ll charge 3K and that’s what I did on this one
I'm new to this can you pull a dent outt spare trie well with a lager dent and crested
Pull out the back with all the dent
Hey brother. I am new to the channel. Much respect to what you do - pretty awesome! I got a dent on my truck that I am "puzzled" with. Is there a way I could get an advice from you on what to start with and "which way" to pull?
Email me let’s see what you have
Good afternoon to the best of the best! What state are you in? How much does your training cost?
Your work is sooo good
How much time did it take?
Thank you for your question two days
wondering the time for this repair
2days
Великолепная работа
That you for your comment
How do you avoid oil canning? Great work
If the dent is pulled wrong, that’s how you get the oil Can
Impressive. How many hours did the repair take?
Two days thank you for your question
would like to look a you wood post do video on it and give dimesons, thanks great video
Thank you for your comment. I will see what I can do.
What kind of glue did you use? For some reason the glue I use is not holding on
Great work! what glue do you use?
Thank you for the question Glue I use
pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/
New subscribers. Can you tell me what glue do you use i goin to try my first pdr 😮
Glue request
pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/
Are you not able too do dents tht are paint chipped is tht projects you don’t get must be painted if dent creats a chip
New subscriber. Where are you located?
new subscriber
Pat welcome to my channel
Dobra robota mistrz !!!
Szkoliłem się u niego 😁
Right on
How long did this take 🤯
2 days
🔥🔥
Thank you
Cuanto tiene de real y cuánto de fisión?
Thank you, victor
Since this is a Tesla, is that an Aluminum gate?
Steel my friend thank you for your comment
Where can I get this repair kit
Here you go pdr-training-tools.com/en/products/glue-pulling-kits-(gpr)/162/pdr-tech-kit/
Thank you
Is there any good garage like this in Ontario?
Google Paintless Dent Repair read the reviews
@@DentDiscountPDRBodyShop fair enough, thanks. I got an audi q5 that I bought after accident, I repaired it myself, but there's still a big dent under the rear left light. I was thinking about replacing the whole trunk gate, but it's not worth it at this point.
How long did that job take?
I’m slow 2 full days
I would have to take all the ritalin un the world to have that much focus and attention to detail 🤣🤣🤣🇬🇧👍
Yes, it’s hard for me to focus and stay in one spot too. I have to take a break occasionally. Thank you for your comment.
Did you get that chain from mr T 👻just asking
Love it
wow
Thank you for your comment
❤❤❤❤❤❤ good
Do you have any friend or shop in NL?
Sorry..you can google pdr in your city
Respekt!
Patrick, thank you for your comment
🔥🔥🔥🔥🔥🔥🔥💯
Thank you
Dostum nerelerdesin?
Thank you I appreciate your comment
However, there’s a language barrier
Almost too good to believe, almost like you swapped vehicles
Bill Thank you for your comment. I appreciate it.
Unbelievable
Thank you
I would not want that to come undone and fly in my face.
Laugh out loud. Thank you for your comment.
My glue never comes off. I have to heat it and run alcohol to get my tabs off.
@@DentDiscountPDRBodyShopGlad to hear that has not happened. Knock on wood that it doesn't. I dont want to see a video of bloobers. keep up the work. 👊👊👊
Show.
Thank you for comment
Easier to just replace the panel.
Customer prefer to keep it original, including the paint.
This one was a mess
It was fun and messy
😂
Thank you
Allen Paul White Timothy Anderson Sandra
Bhooo vai in demolizione e lo sostituisci con metà del tempo e dei soldi....
Thank you for your great comment. That’s what most shops will do. You’re absolutely right.
They invented body filler for a reason . Most vehicle owners do not care.
People do care when their body filler cracks and their paint pops off. Thank you for your comment Ray Ray.
tezla, scammers, give me back my money for not delivering the vehicle to me and for scamming me out of the costs of accessories for this scrap metal, I will advertise for you until I get my money back and by the way, this happened in February 2022
Thank you for your comment. I appreciate it.
But.... its still all dented to shit. Just much smaller dents now.
Thank you for your comment
Bzdura na resorach...
Did you say Happy paying customer on this repair.
Awesome job!
Thank you Fred