These little 2s toothpicks and 2s whoops are one of my favorite class of quads to fly. And more now that Walksnail has these awesome little VTX’s. Great vid bro.🤙🍺🍺
Fun watch. You should consider a one piece bottom plate. I have one of these built on the crux 3, with hdzero and it flies amazing. I also have one built on the same frame as you running walksnail. The one I have that's closest to what you're flying is still great fun but the few grams less of the single bottom plate and lighter vtx seems to make a big difference. I understand you prolly can't do the hdzero thing cause you have the dedicated WS goggles. But anything you can do to reduce weight, like shortening the wires for your RX should make a difference. Over all great vid. Thx for making this. If you wanna see me flying mine that's like yours my channel is zeppelin fpv and its the latest vid.
Dude i swear we are on the same wavelength. I also started with the Cetus X. I built my first 5 inch then you make a video. I build a 3 inch then you make a 3.5 inch video same frame. I build a 2S toothpick and you come out with this video.
Good video, I use liquid electrical tape over my ufl/antenna connection, if you replace the antenna after using be careful and take your time you can rip out the ufl connector pretty easily.
Great build ive got 2 fpvcycle toothpicks the tp3 and baby tooth both with his 13mm 5000kv motors my oldest surprisingly has a darwinfpv board on it and the other i think is a tunerc poly aio both Fly great on 3s
When I flew my crux3 toothpick for the first time I was like woooww I like this style.. I was thinking of jumping from analogue to walksnail . Just for this .
Man it’s worth it. Full hd in a 2s toothpick is something else. The v1 fatshark dominator hd goggles are on sale for 380$. I paid 480$ for mine just before caddx released the goggles x.
hey loving your video, liked to see that flyfish 3.5 inch build, kinda get to learn many things from you, also using walksnail from analog, after looking your video. and walksnail seems great, like too great than analog, also I don't actually feel latency of walksnail, kinda new to fpv gives me perks on not knowing the latence, well thank you for many things. also a suggestion, the black automobile/fabric tape seems great as motor wire tape, just look things, but saved my wires in one crash, so. keep doing great work. thank you man
Whoop around my neighborhood, but whenever I get about two streets away and go to ground level, the video almost completely cuts out. So the 400mw just isn’t enough.
@@maciejdYm # profile 1 set profile_name = - set dterm_lpf1_dyn_min_hz = 75 set dterm_lpf1_dyn_max_hz = 150 set dterm_lpf1_dyn_expo = 5 set dterm_lpf1_type = PT1 set dterm_lpf1_static_hz = 75 set dterm_lpf2_type = PT1 set dterm_lpf2_static_hz = 150 set dterm_notch_hz = 0 set dterm_notch_cutoff = 0 set vbat_sag_compensation = 0 set pid_at_min_throttle = ON set anti_gravity_gain = 80 set anti_gravity_cutoff_hz = 5 set anti_gravity_p_gain = 100 set acc_limit_yaw = 0 set acc_limit = 0 set crash_dthreshold = 50 set crash_gthreshold = 400 set crash_setpoint_threshold = 350 set crash_time = 500 set crash_delay = 0 set crash_recovery_angle = 10 set crash_recovery_rate = 100 set crash_limit_yaw = 200 set crash_recovery = OFF set iterm_rotation = OFF set iterm_relax = RP set iterm_relax_type = SETPOINT set iterm_relax_cutoff = 15 set iterm_windup = 85 set iterm_limit = 400 set pidsum_limit = 500 set pidsum_limit_yaw = 400 set yaw_lowpass_hz = 100 set throttle_boost = 5 set throttle_boost_cutoff = 15 set p_pitch = 54 set i_pitch = 101 set d_pitch = 33 set f_pitch = 131 set p_roll = 51 set i_roll = 97 set d_roll = 29 set f_roll = 125 set p_yaw = 51 set i_yaw = 97 set d_yaw = 0 set f_yaw = 125 set angle_level_strength = 50 set horizon_level_strength = 50 set horizon_transition = 75 set level_limit = 55 set horizon_tilt_effect = 75 set horizon_tilt_expert_mode = OFF set abs_control_gain = 0 set abs_control_limit = 90 set abs_control_error_limit = 20 set abs_control_cutoff = 11 set use_integrated_yaw = OFF set integrated_yaw_relax = 200 set d_min_roll = 29 set d_min_pitch = 33 set d_min_yaw = 0 set d_max_gain = 37 set d_max_advance = 20 set motor_output_limit = 100 set auto_profile_cell_count = 0 set launch_control_mode = NORMAL set launch_trigger_allow_reset = ON set launch_trigger_throttle_percent = 20 set launch_angle_limit = 0 set launch_control_gain = 40 set thrust_linear = 0 set transient_throttle_limit = 0 set feedforward_transition = 0 set feedforward_averaging = OFF set feedforward_smooth_factor = 25 set feedforward_jitter_factor = 7 set feedforward_boost = 15 set feedforward_max_rate_limit = 90 set dyn_idle_min_rpm = 0 set dyn_idle_p_gain = 50 set dyn_idle_i_gain = 50 set dyn_idle_d_gain = 50 set dyn_idle_max_increase = 150 set level_race_mode = OFF set simplified_pids_mode = RPY set simplified_master_multiplier = 105 set simplified_i_gain = 105 set simplified_d_gain = 95 set simplified_pi_gain = 110 set simplified_dmax_gain = 0 set simplified_feedforward_gain = 100 set simplified_pitch_d_gain = 100 set simplified_pitch_pi_gain = 100 set simplified_dterm_filter = ON set simplified_dterm_filter_multiplier = 100 set tpa_mode = D set tpa_rate = 65 set tpa_breakpoint = 1350
It was super hard 😂. I used tweezers and a small allen wrench. You have to kinda squeeze and push some through and then carefully pull it through without tearing it too much.
Use fishing wire or dental floss. Wrap it around the rubber grommet and pull the string in first. And feed the grommet thru the hole while pulling on the string. Try it. Easiest way 🫡
That’s common with 1s lite kit. After crash it spikes the voltage above the 5V it’s rated for and fry’s it. Sad ): There’s a capacitor you can solder onto the regulator that supposedly helps
@@andrewmedia3568 bardwell actually has a video for it too that’s how I found out. I’m doing a build with the same aio board as you ! And the 1s lite vtx kit. And was worried since I was planning on using it with a 3s I saw it’s rated for 2-4s
I have a question regarding the Walksnail 1s. I just bought one and I have V3 that states it support 3.1 - 13V and I built a 3" light drone and want to put that vtx in it. I'm actually using the Pavo Pico AIO board from BetaFPV and it has the option to change the vbat from 9v to 3V but it should work with both, am I correct? i don't want to fry it but just curious what your experience with it is and what you may suggest?
Yes the V3 board does support 3.1- 13V . From my testing and what ive seen for best results go for either a 5v or vbat if you are running 2-3s voltage. Im running mine to a 5v plug and 2s voltage and its been great. Its better to have it running to a voltage higher than 3.1 but obviously not higher than the 13 volt threshold.
@@andrewmedia3568 Yeah I'll be running 2s and/or 3s batteries on it but just wasnt sure if i need to change it or not. the default on the AIO is 9V so i shouldn't HAVE to change it correct?
Man, this hobby is so expensive :D motor (~$12), walksnail vtx (~$75), camera lens ($10), canopy ($5) = $102 total So $100 bucks for 1-2 hours of FPV experience :D
These little 2s toothpicks and 2s whoops are one of my favorite class of quads to fly. And more now that Walksnail has these awesome little VTX’s. Great vid bro.🤙🍺🍺
Thanks 🤘.I totally agree awesome performance from a small size. Now in hd thanks to walksnail.
@@andrewmedia3568Sorry about the damage, just saw the end. I kinda screwed my HDzero whoop board or mipi at a bando recently so I feel your pain.
@@derelictfpv yeah very sad lol. I’ve got another board on the way. Hopefully will last longer than 2 weeks this time.
Hard to control our urges when we're flying around like a superhero. Heh. Good lesson for all of us. Thanks for sharing!
Really enjoying your build videos. Just subscribed. Like the detail. Thanks again
No problem glad you enjoy them. 🤘
The walksnail looks great for a 1s. Nice build.
Thanks 😁
Great videos man. I appreciate the time you put into production. Bad luck with that crash.
Fun watch. You should consider a one piece bottom plate. I have one of these built on the crux 3, with hdzero and it flies amazing. I also have one built on the same frame as you running walksnail. The one I have that's closest to what you're flying is still great fun but the few grams less of the single bottom plate and lighter vtx seems to make a big difference. I understand you prolly can't do the hdzero thing cause you have the dedicated WS goggles. But anything you can do to reduce weight, like shortening the wires for your RX should make a difference. Over all great vid. Thx for making this. If you wanna see me flying mine that's like yours my channel is zeppelin fpv and its the latest vid.
Yo been here sense 200 subs! Congrats on almost 2k!
💪 Hey Thank you I appreciate it !!
Dude i swear we are on the same wavelength. I also started with the Cetus X. I built my first 5 inch then you make a video. I build a 3 inch then you make a 3.5 inch video same frame. I build a 2S toothpick and you come out with this video.
Great minds think alike 😁🤘.
@@andrewmedia3568 hell yea bro! I'm so hooked on this shit. I can't get enough. Big fan of your videos. Cant wait to see what you get into next!
@@DaywalkerFPV I really appreciate it. I’ve got some more videos in the works. More builds and testing for sure.
Good video, I use liquid electrical tape over my ufl/antenna connection, if you replace the antenna after using be careful and take your time you can rip out the ufl connector pretty easily.
That’s a good idea thanks. 🤘
Great build ive got 2 fpvcycle toothpicks the tp3 and baby tooth both with his 13mm 5000kv motors my oldest surprisingly has a darwinfpv board on it and the other i think is a tunerc poly aio both Fly great on 3s
When I flew my crux3 toothpick for the first time I was like woooww I like this style.. I was thinking of jumping from analogue to walksnail . Just for this .
Man it’s worth it. Full hd in a 2s toothpick is something else. The v1 fatshark dominator hd goggles are on sale for 380$. I paid 480$ for mine just before caddx released the goggles x.
Nice build - O.K. at least the replacement camera lens is cheap for the Walksail stuff
hey loving your video, liked to see that flyfish 3.5 inch build, kinda get to learn many things from you, also using walksnail from analog, after looking your video. and walksnail seems great, like too great than analog, also I don't actually feel latency of walksnail, kinda new to fpv gives me perks on not knowing the latence, well thank you for many things. also a suggestion, the black automobile/fabric tape seems great as motor wire tape, just look things, but saved my wires in one crash, so. keep doing great work. thank you man
Would it be possible to make a 3 inch 3S toothpick analog drone with a 2500 mW VTX?
Not sure thats gonna be a pretty big VTX. What do you need 2500mW in a toothpick for?
So I need a strong vtx but I still want to stay with 3inch
Whoop around my neighborhood, but whenever I get about two streets away and go to ground level, the video almost completely cuts out. So the 400mw just isn’t enough.
ALWAYS secure the props with screws... i take plastic screws to save weight
If not too heavy, floss in-between the motor stem and the prop works well too.
Curious how that board is holding up…I’ve got everything in the shopping cart besides FC…
The AIO is fine. Never had an issue with the FC.
Can you share betaflight dump. I did a similar build and have some strange oscillations, just want to diff the settings.
Not sure where I can post a BF CLI dump.
@@andrewmedia3568 Post link to the file on google drive, or just put PID and filter section of dump in this conversation.
@@maciejdYm # profile 1
set profile_name = -
set dterm_lpf1_dyn_min_hz = 75
set dterm_lpf1_dyn_max_hz = 150
set dterm_lpf1_dyn_expo = 5
set dterm_lpf1_type = PT1
set dterm_lpf1_static_hz = 75
set dterm_lpf2_type = PT1
set dterm_lpf2_static_hz = 150
set dterm_notch_hz = 0
set dterm_notch_cutoff = 0
set vbat_sag_compensation = 0
set pid_at_min_throttle = ON
set anti_gravity_gain = 80
set anti_gravity_cutoff_hz = 5
set anti_gravity_p_gain = 100
set acc_limit_yaw = 0
set acc_limit = 0
set crash_dthreshold = 50
set crash_gthreshold = 400
set crash_setpoint_threshold = 350
set crash_time = 500
set crash_delay = 0
set crash_recovery_angle = 10
set crash_recovery_rate = 100
set crash_limit_yaw = 200
set crash_recovery = OFF
set iterm_rotation = OFF
set iterm_relax = RP
set iterm_relax_type = SETPOINT
set iterm_relax_cutoff = 15
set iterm_windup = 85
set iterm_limit = 400
set pidsum_limit = 500
set pidsum_limit_yaw = 400
set yaw_lowpass_hz = 100
set throttle_boost = 5
set throttle_boost_cutoff = 15
set p_pitch = 54
set i_pitch = 101
set d_pitch = 33
set f_pitch = 131
set p_roll = 51
set i_roll = 97
set d_roll = 29
set f_roll = 125
set p_yaw = 51
set i_yaw = 97
set d_yaw = 0
set f_yaw = 125
set angle_level_strength = 50
set horizon_level_strength = 50
set horizon_transition = 75
set level_limit = 55
set horizon_tilt_effect = 75
set horizon_tilt_expert_mode = OFF
set abs_control_gain = 0
set abs_control_limit = 90
set abs_control_error_limit = 20
set abs_control_cutoff = 11
set use_integrated_yaw = OFF
set integrated_yaw_relax = 200
set d_min_roll = 29
set d_min_pitch = 33
set d_min_yaw = 0
set d_max_gain = 37
set d_max_advance = 20
set motor_output_limit = 100
set auto_profile_cell_count = 0
set launch_control_mode = NORMAL
set launch_trigger_allow_reset = ON
set launch_trigger_throttle_percent = 20
set launch_angle_limit = 0
set launch_control_gain = 40
set thrust_linear = 0
set transient_throttle_limit = 0
set feedforward_transition = 0
set feedforward_averaging = OFF
set feedforward_smooth_factor = 25
set feedforward_jitter_factor = 7
set feedforward_boost = 15
set feedforward_max_rate_limit = 90
set dyn_idle_min_rpm = 0
set dyn_idle_p_gain = 50
set dyn_idle_i_gain = 50
set dyn_idle_d_gain = 50
set dyn_idle_max_increase = 150
set level_race_mode = OFF
set simplified_pids_mode = RPY
set simplified_master_multiplier = 105
set simplified_i_gain = 105
set simplified_d_gain = 95
set simplified_pi_gain = 110
set simplified_dmax_gain = 0
set simplified_feedforward_gain = 100
set simplified_pitch_d_gain = 100
set simplified_pitch_pi_gain = 100
set simplified_dterm_filter = ON
set simplified_dterm_filter_multiplier = 100
set tpa_mode = D
set tpa_rate = 65
set tpa_breakpoint = 1350
Might seem light a silly question but how did you get the rubber dampeners in the vtx board?? Im stuck lol
It was super hard 😂. I used tweezers and a small allen wrench. You have to kinda squeeze and push some through and then carefully pull it through without tearing it too much.
Use fishing wire or dental floss.
Wrap it around the rubber grommet and pull the string in first. And feed the grommet thru the hole while pulling on the string.
Try it. Easiest way 🫡
That’s common with 1s lite kit.
After crash it spikes the voltage above the 5V it’s rated for and fry’s it.
Sad ):
There’s a capacitor you can solder onto the regulator that supposedly helps
dang, ok thanks for the info.
@@andrewmedia3568 bardwell actually has a video for it too that’s how I found out.
I’m doing a build with the same aio board as you ! And the 1s lite vtx kit. And was worried since I was planning on using it with a 3s
I saw it’s rated for 2-4s
@@MendozaFPV the v3 1s lite is 3.1-13 volts so as long as your in that range for input voltage you should be good to go.
I have a question regarding the Walksnail 1s. I just bought one and I have V3 that states it support 3.1 - 13V and I built a 3" light drone and want to put that vtx in it. I'm actually using the Pavo Pico AIO board from BetaFPV and it has the option to change the vbat from 9v to 3V but it should work with both, am I correct? i don't want to fry it but just curious what your experience with it is and what you may suggest?
Yes the V3 board does support 3.1- 13V . From my testing and what ive seen for best results go for either a 5v or vbat if you are running 2-3s voltage. Im running mine to a 5v plug and 2s voltage and its been great. Its better to have it running to a voltage higher than 3.1 but obviously not higher than the 13 volt threshold.
@@andrewmedia3568 Yeah I'll be running 2s and/or 3s batteries on it but just wasnt sure if i need to change it or not. the default on the AIO is 9V so i shouldn't HAVE to change it correct?
correct 9v would be perfect. 👍@@imagin311
So you can use 2s on the 1s WS
Yes, up to 13 volts I believe on the V3 boards. or you can always just go to a 5v pad.
For those who don't want to do the math: 258,08$ for the whole drone
Thank you 😁 forget to add the total.
That little drone is almost the same price as my 5" lol😂
Hi share the PID settings thanks
Damping : 0.95
Tracking: 1.1
Stick Response: 1
Dynamic Damping: 0
Drift Wobble: 1.05
Pitch Damping: 1
Pitch Tracking: 1
Master Multiplier: 1.05
@@andrewmedia3568 grande 💪💪
Man, this hobby is so expensive :D
motor (~$12), walksnail vtx (~$75), camera lens ($10), canopy ($5) = $102 total
So $100 bucks for 1-2 hours of FPV experience :D
It is expensive, but worth it! 😄
That sucks, but nonetheless educational. Nice build though.
Thanks!
Installed a new vtx and it’s all good now.
"Damn i usually loose props" trys to fly ....imediataly looses prop 😂
Mistakes were made 🤣