not a single word... he deserves a like. It's amazing... and this music.... It's like I've heard it before. I heard it there..where there are no problems and there are no people and the walls are white and the air is also very cool and pleasant....I don't want to go back there.....
Both the quad and the video edit, a piece of art. love the sound effects and background music! Really cool. And the best part the squishy grommets! Thanks!:)
A Tip : Install your drone in this order : Stack -> AirUnit -> elrs/gps -> motors. This way motor cables won't get in the way and if you want to route cables below the esc, it will be easier to lift it since it won't be connected to the motors or anything. Also : B U Y A S O L D E R F U M E E X T R A C T O R Y O U W I L L G E T L U N G C A N C E R
That's a really good video. I am preparing to build my own fpv drone and I don't know where to start. Then I saw your video, and it's helped me a lot!!!
Really Nice content! I really needed this, Thank You ! but I have a question i bought my controller a year ago it's a Jumper T12 how do I use it for this build? I'm assuming I need to match the receiver but I'm new in this field can you help?
@@teeslunk No, I bought everything separately. Depending on the country you live in, there are different online stores. You can Google the parts I mention in the description and find the right store.
pretty nice. thank you! please pay more attention to details. I had a hub question about the order of the motor wires. And also that rubber gummies p would be great to see the detailed position and how it looks from a side, the whole stack (two plates, two gummies and nut.
Thank you! That's a good idea. I will try to pay more attention to details. Sometimes i miss something because it is kinda tricky to build and film at the same time
Just finished building mine same motors and the o3 air unit. Just waiting on the battery's. What props have you found to be best? and what tune do you like best for it? Any tips to getting it flying great?
Question, and I only ask because I am a newbie. When given a choice. Would it be Speedybee or Mamba. My first drone, never flown before. My frame and motors are awaiting the stack...
Heatshrink a vifly mini to the battery strap and run the wires down through the top plate. I did exactly that on my F3 and F35. You need a buzzer on those tiny quads, especially. It looks perfectly fine and I haven't had any trouble at all with it being on the outside of the quad.
@@SkiptaFPV gotcha. thanks yea i was able to locate them by separate thanks to the description you left. Your vid got me so excited I'm getting ready for my first build. Cheers from Costa Rica !
Really nice build.. I watched from start to finish. I have several build videos and your was great. Loved the edit, I see the work that went in to it. Good show. I subbed up. Thanks. On my quadmulas I put the receiver under the main bottom plate inside the c lock area. Work great there. But I'm building f5 splits..
@SkiptaFPV works great.. the company commented in my video about what a great place It would be and how safe the receiver would be there.. you can see it on any of the three build videos I have on my channel.. works great. Can see the led well. No problems. Very clean.. your video was awesome.. I may ask you a few questions soon, I think I want one and haven't built a quad that small before.. I'm sure it is a bit different.. thanks for your time.
is there a way to add in the cost of these builds? always into these types of things but im not sure alot of people know about how much it cost to make someone like this.
Top notch built man!! So soothing to watch it come together.. so you can upgrade the camera with 1s mini. I thought the camera cable was glued.. anyways mine will arrive this weekend and I will check it out. Also the reason for the camera change? Gyro flow?
All the products names listed in the description. There is a lot of place there you can buy them. Depends on country there you live. That's why i didn't put any links
i wish building a quad was actually this satisfying FIT IN THE THE DAMN HOLE. WHY THE HELL WILL YOU NOT FIT AHHHHH WHY IS THAT PAD BRIDGED, STOP BEING BRIDGED DUDE WHY IS THIS MOTOR SPINNING BACKWARDS EVEN AFTER I TOLD YOU TO SPIN THE OTHER WAY FLIPPING OSD WONT WORK NOW HOLY CRAP DUDE I PUT PROPS ON BACKWARDS ahh, it finally flys *crashes into tree and repeats the entire proses*
No annoying talking, just him building the thing. Earned yourself a like and sub.
Talking about what? about how expensive this product? LOL
@@samirmamedzade2964 i dont see a comment about him saying whats the price but you look jealous for some reason
This video appeases me, it's a real passionate video, you should be like the guy who builds bikes.
I send you all my strength.
not a single word... he deserves a like. It's amazing... and this music.... It's like I've heard it before. I heard it there..where there are no problems and there are no people and the walls are white and the air is also very cool and pleasant....I don't want to go back there.....
Both the quad and the video edit, a piece of art. love the sound effects and background music! Really cool. And the best part the squishy grommets! Thanks!:)
That's the cleanest looking build I've seen yet. Great ideas thank you!
The heat shrink and wire mesh looks really clean 👌
Can’t wait to see if you fly it cus I might build one
Video was therapeutic
I have no clue how this thing works, but I liked watching you work
how much did it cost for the kit
A Tip : Install your drone in this order : Stack -> AirUnit -> elrs/gps -> motors. This way motor cables won't get in the way and if you want to route cables below the esc, it will be easier to lift it since it won't be connected to the motors or anything.
Also : B U Y A S O L D E R F U M E E X T R A C T O R Y O U W I L L G E T L U N G C A N C E R
Even if you solder once every few months?
@BreEZe_A at least use a small fan you can find one at wally for like 5$.
@@BreEZe_A nah not really. worst thing that can happen is you'll get a small headache
I'm fucked
Being outside near a window or in a well ventilated area also could do the trick
really good song choice i wasnt even high yet but i got stuck here for a bit just thinking about nothing but this
These are the most satisfying videos soo far
Amazing!
Красава! Супер сборка и музыка сама концентрация - чуть в астрал не улетел.
It looks very beautiful ❤
Montaje impecable, muy limpio y recogido... Perfecto
That's a really good video. I am preparing to build my own fpv drone and I don't know where to start. Then I saw your video, and it's helped me a lot!!!
21:27 This is when I lost it. Really?! That's too good!
im currently also building a djinn f25 could you please share those stl files for the bigger capacitor and the antenna holder? cheers
Nice build really clean and tight, well done sir.
Hello man great build just wanted to ask if you sell them?
I build it for my personal use. I'm not selling anything
@@SkiptaFPV it would be a great business
neet and clean build⭐⭐⭐⭐⭐
Your soldering is beautiful
Really Nice content! I really needed this, Thank You ! but I have a question i bought my controller a year ago it's a Jumper T12 how do I use it for this build? I'm assuming I need to match the receiver but I'm new in this field can you help?
That's a complicated question. Better to watch @JoshuaBardwell videos
Off topic question; Whats the name of the music, it’s very calming?
Yeah is that a kit u can buy??
And where did you get it?
@@teeslunk No, I bought everything separately. Depending on the country you live in, there are different online stores. You can Google the parts I mention in the description and find the right store.
Nice clean build , solid work my friend.
pretty nice. thank you! please pay more attention to details. I had a hub question about the order of the motor wires. And also that rubber gummies p would be great to see the detailed position and how it looks from a side, the whole stack (two plates, two gummies and nut.
and it looks like you put ESC upside down and it might be you need to rearrange the motors' order later then. Or not?
Thank you! That's a good idea. I will try to pay more attention to details. Sometimes i miss something because it is kinda tricky to build and film at the same time
and yes i did some adjustments in betaflight
@@SkiptaFPV yes, I can imagine. great you can add titles/pictures later.
Just finished building mine same motors and the o3 air unit. Just waiting on the battery's. What props have you found to be best? and what tune do you like best for it? Any tips to getting it flying great?
check my last video for best prop. And for the tune i cant say. But you can find more video with this Quadmula f25 frame. Maybe they will be helpful
You've made a little masterpiece 👍
Question, and I only ask because I am a newbie. When given a choice. Would it be Speedybee or Mamba. My first drone, never flown before. My frame and motors are awaiting the stack...
Cool build video. You just got another subscriber.
how much did it all cost? I'm thinking about building my own to save on cost, but I'm not even sure if it's cheaper
This one is about 500eur. Not the cheapest for sure
it would be nice to assemble my own drone. How did you learn each step to built it ?
Nice build! It's really reassuring to watch you building this quad
That was a really relaxing video...I hope you applied threadlock before flying.
Thank you! Threadlock was the last thing before maiden flight. Just didn’t show it here. It is too boring to show I think.
How much did the drone cost great video
Thank you! The price is about 400eur
Wish you had some sort of affiliate link or shopping cart with everything together. Would love a one stop shop and to know what this cost.
You can check description i add some links recently
Hello, I'm new to fpv. I wanted to ask, why don't you use Threadlocker?
Gran video! Dove posso acquistare tutti i componenti?
Where did you get all the parts from, can you please share any source to buy them ?
I just got done repairing my Djinn. I have 1404 3000kv on 650mah 6S and it's a little beast to fly. To bad we can't put a self-powed buzzer on this
I'm using GNB 6s 380 and it is enough for 3-4 min freestyle
Heatshrink a vifly mini to the battery strap and run the wires down through the top plate. I did exactly that on my F3 and F35. You need a buzzer on those tiny quads, especially. It looks perfectly fine and I haven't had any trouble at all with it being on the outside of the quad.
What is the name of background Music.. Its so soothing ❤
Nice clean buid soild work my frined❤❤
I am so tempted to dive into the drone hobby and you sir, made it more difficult lol good work
Lol. But you don't need to build it. There are many excellent pre-assembled quads on the market.
Can you please tell me literally everything u used in this build like where you got all the things please
The long motor screws are prop screws. You almost have them touching the motor coil wires, One good thwack and that's going to smoke your motor.
This is the best I have. And it's still alive. I think only if i bend the motor really hard it contact
@@SkiptaFPV Let's hope that continues to be the case. I wish you may great flights!
Were can i get it at
you can't buy exactly the same build. But you can get all the parts from different online FPV shops and build it by yourself
Were did you get it from? And didn’t you have to pick each individual component?
I bought it from different online stores. And yes, I select the components individually.
What sized wire sleeving did you use?
hi ! did you buy it as a kit with the rest of the pieces or is there a website where i can get it
Parts for this build i got in different places
@@SkiptaFPV gotcha. thanks yea i was able to locate them by separate thanks to the description you left. Your vid got me so excited I'm getting ready for my first build. Cheers from Costa Rica !
How much did it cost to make this drone?
About 400 euros
433$ USD
Where can I buy that and how much it cost in Philippines Piso ?
Where did you order this stuff through?
Really nice build.. I watched from start to finish. I have several build videos and your was great. Loved the edit, I see the work that went in to it. Good show. I subbed up. Thanks. On my quadmulas I put the receiver under the main bottom plate inside the c lock area. Work great there. But I'm building f5 splits..
Thank you! That's an interesting place to put receiver on. Never thought about it
@SkiptaFPV works great.. the company commented in my video about what a great place It would be and how safe the receiver would be there.. you can see it on any of the three build videos I have on my channel.. works great. Can see the led well. No problems. Very clean.. your video was awesome.. I may ask you a few questions soon, I think I want one and haven't built a quad that small before.. I'm sure it is a bit different.. thanks for your time.
Where did you buy this kit?
Everything was bought in different places. You can check links in the description
You have great video! Make a kit up dude!
Which 3d parts did you use vor this
i designed and printed them by myself
@@SkiptaFPV can you share the link from the dual antenna holder? I want to upgrade to a Moonlight as well. :D
Is it able to use a DJI o3 air unit
Link to buy this please 😮
Sorry I bought all components in different places
How much does it cost in total and is a camera need to fly?
It is around 500eur. And yes camera is needed
love you bro i am like in mediation mode loking those cool assemblings..
well bro if dont mind can you share which camera are you using??
\
Thanks bro! I use my Iphone 12 mini for filming
Hi nice video im from island of Philippine i wish i had something like that😊
How much did it cost in parts?
I love the video my friend 😎 I fly my djinn all the time love it , subbed
Thank you! And i love this quad. Really fun to fly
13:27 why don’t you use it on the small cables?
this tool is too bulky for small wires. But i'm already bought better one.
is there a way to add in the cost of these builds? always into these types of things but im not sure alot of people know about how much it cost to make someone like this.
Price can be different from country to country. But i will think about adding average price for item for the next build
@@SkiptaFPV yea i think it will give a good frame of reference
even if its euros i can always google conversion and get an idea in usd
Could you give us the complete parts list?
Why I can't go in the Quardmula site and am getting an error 404
It means the site is down, possibly permanently, but not necessarily.
That's weird. I still able to open it
3 inch?
What's that hexdriver called?
Really clean build 🙌 hope he doesn’t end in the sea like mine 😢 anyway, I was just wondering which type of tpu did you use? (95A, 90A, 85A…) thanks
here I'm using is 85A but it is too soft. Going to change it to 95A
@@SkiptaFPV ok thanks, I am looking forward to build a new fpv drone and was wondering which tpu use. Nice build btw
Do you know a good analog system that would work on this build?
Sorry now I'm using only Walksnail HD system
Is it good in the wind even tho it’s tiny?
i'd say good enough. 5 inch quad will be better of course
@@SkiptaFPV do you mind telling me how much it is too, sry just wanna know
@@Stinky0368 this one cost me around 400 eur
what is the entire cost of that kit ?
Nice build! The one thing I`d recommend is a better tip for your soldering iron :)
So cute
Awesome stuff but those lock nuts might not be performing there job. You normally need the thread to protrude past the nylon
how do you film this?
With my old iPhone 12 mini and desk lamp
use floss or string for the rubber graumets
Could you please send me link so that I can buy
All these available in India? If so please share details
Sorry i don't know. All the specs in the description. You can search for them in India.
How much did it cost?
21:40 Found a good solution for everything, only to use cable ties in the end 😢
how much one like that build cost?
around 500 eur
Tooth floss is your best friend when installing those pesky rubber gromets, look it up!
Top notch built man!! So soothing to watch it come together.. so you can upgrade the camera with 1s mini. I thought the camera cable was glued.. anyways mine will arrive this weekend and I will check it out. Also the reason for the camera change? Gyro flow?
Is it on market 😮
what did this setup cost you?
How much was all that stuff money?
i wish i could make my drone look so clean watched the video like 10 times
where is part 2?? I need to see it take off.
Name of Background music?
ayop where you get that
Can u send me a link to all the products
All the products names listed in the description. There is a lot of place there you can buy them. Depends on country there you live. That's why i didn't put any links
If someone wondered this drone with all of the parts costs around 300 bucks.
should have used even bigging tie wraps though sheesh lol
which cost bro
Why you used XT 30 not XT 60 ?
Weight reduction and also the batteries I use with the XT30
very nice work though
i wish building a quad was actually this satisfying
FIT IN THE THE DAMN HOLE. WHY THE HELL WILL YOU NOT FIT AHHHHH
WHY IS THAT PAD BRIDGED, STOP BEING BRIDGED
DUDE WHY IS THIS MOTOR SPINNING BACKWARDS EVEN AFTER I TOLD YOU TO SPIN THE OTHER WAY
FLIPPING OSD WONT WORK NOW
HOLY CRAP DUDE I PUT PROPS ON BACKWARDS
ahh, it finally flys
*crashes into tree and repeats the entire proses*
That's literally me 😆