5" Freestyle FPV Drone Build And Flight || Speedybee Walksnail HD Build

Got Another FPV Drone Build for you guys. Very excited for this one Featuring A gps Module so now I can range test the Walksnail system. Coming soon in another video. Hope this helps people and hopefully you enjoy the video. more to come soon. Thanks for watching.
Walksnail Avatar HD Micro Camera & VTX Kit V2 32GB with Gyroflow. - $131.11
T-Motor Velox V3 2306 2550KV Motor. $14.89 x 4 = $59.56
SpeedyBee Master 5 V2 5" FPV Freestyle Frame. - $69.99
TBS Tracer Immortal T Antenna - Extended. - $4.95
Happymodel 2.4G ExpressLRS EP1 Dual TCXO RX True Diversity Receiver Module.- $24.99
SpeedyBee F405 V3 Stack w/ 50A 3-6S 8 Bit 4in1 ESC - 30×30mm. - $59.99
Walksnail WS-M181 M10 GPS Module. - $16.99
Subtotal = - $367.58
Total = $403.60
#drone #fpv #fpvdrone #betaflight #caddx #dji #fpvfreestyle #gpsrescue #walksnail #speedybee #tmotor

[@mxracingunlimitedltd7784]

The flush mount screws are called counter-sunk screws and those have a tapered head bolt. incase you need replacements or want to compare other frames. I like this frame a lot, but i like the FlyFish RC Valador 5D/5X Frame, especially when running the O3 or anything similiar to that for nice camera mounts for vibration resistance and keeps the camera gaurded as much as possible from a front end crash.

[@tomo_ka3040]

gonna build my first FPV quad soon, once all the parts get shipped, this vid was very helpful and insightive! thanks!

[@mlentsch]

Wow - the GoPro footage isn't that great compared to the WS. I just picked up one of those Insta360 Ace Pros... it's next-gen.

[@jvalovcik]

I just got one of these frames and instructions say long arms are front and short arms are back but there is no way the arms fit to the bottom plate the holes don’t match up no matter which way I try. The only way they will work is the long arms are in the rear if this is not correct then I need to return the frame.

[@mlentsch]

Solder joints are pretty good. Those purple lock nuts are for the bottom of the stack, however. Typically you'd use those flat nylon nuts for the top of the stack. Of course, you can do whatever you want.... Cheers -

[@squirrelynutz1]

I's any of the motor wires near the gyro? That can cause a freak out. They can cause interference since you have they running between the stack.

[@jvalovcik]

what is the dimension from back of camera to front of VTX module? I want to get a new SpeedyBee Master 5 HD 5" frame but i think it is longer and the Walksnail Avatar Pro Kit has a coaxial cable that is only 140mm long?

[@clifffield1]

I would really love to know what caused that glitch... Random things like that don’t do much for my confidence (in terms of safety) when flying. I don’t know that I would want to trust it in an area where a crash could be costly to you or someone else.

[@jeevandewee]

Great build video! Did you use a preset tune? If so, which one?

[@elanozturk]

Hello, i followed you to build the drone with same specs like motors etc, possible to share your pid and other settings? Thanks🙋🏻‍♂️

[@RafaelQuizonvlog]

Awsome tutorial im gona build my first quad

[@iworkforthem]

32:33

[@dhvanilshah1286]

HI

[@pavanverma1774]

WHich FPV Goggles did you used ??

[@MistBrwn]

Is it ok to shrink wrap the wires instead of twisting them?

[@MadhAviation]

What controller and goggles are used?

[@MatizVFX]

what propellers & batteries u used?

[@MatizVFX]

can you reccomend some buget goggles for this build LOVE THE BUILD SM

[@Epllifyyy]

what batteries are recommended for this drone ?

[@kavorka8855]

Master 5? Or Mario 5?