Bonjour très beau travail comme d'habitude, je vous suis depuis longtemps ,même si je ne parle pas anglais, en regarder vos vidéos j'apprends beaucoup . Merci beaucoup
10:10 Ahhhh! So that is how to do the decal panel line! And it is so simple. I have seen the light An X-acto knife instead of a toothpick. LET THE DECALS DRY before cutting. After, hit it with softening solution. You are a god. ;-)
Great job as usual. Do you clean the body with anything before clear coat? After the decal solution dries I sometimes see water marks or some other imperfection on my projects. I wipe the body with water and dry it before adding clear coat, not sure if I need to be doing that.
Awesome paint job ! What is the difference between Tamiya “fine” surface primer spray and the Tamiya surface primer spray ???? Anyone, please .. thank you !
Amazing work... I want to do same 😁 Sorry for stupid question but do you think we can make same process on PLA 3d print body's ? I think yes but make need more polish first isn't it?
I heard just heard i never answer questions.. so lets answer this one. You can do the same to a pla 3d printed body. But that needs a lot more prep work to get rid of all the 3d printing layer lines
Good afternoon, got a question for you. I recently started building plastic model cars again after several years of not doing it. Please remind me how long do I typically wait before wet sanding clear coat if orange peel developed? Love the vids, keep em coming!
Hello. I have a couple of questions. I use a can of Mr topcoat gloss to clear coat my models and I always see people sanding their clear coats with 3000+ grit sand paper and using tamiya or meguiars compounds. 1. Can I sand Mr topcoat and should I go about doing that. 2. Do I need to use a compound like meguiars after sanding
1. You can sand clearcoat if you want to create a smoother finish. 2. You can use that brand, but there are also many other polishing compound brands that can be used
When you spray with the air brush you constantly hold the trigger down for air to come out? Cuz when I paint I pull it back then release and when start again it spits paint on the body
if you are using a double action airbrush it's best practice to constantly hold the air on and will stop the spattering, as the needle move back and fourth is how the paint flows through the gun, hope that help you out. best way i learned how to control better was doing constant practice of "basic" techniques lines-dots-dagger strokes it improves control so much. i brought myself a cheep A3 certificate frame and drew out a practice sheet that was visible through the glass off the frame that way i could just wipe the paint off the glass and go again quickly
@@TheScalemodelingChannel Ahhh ok got it ! Not only are you an excellent modeler but you have good taste in music as well. Thank you, looking forward to more of your video tutorials. 😎🤙
I am impressed. Been modeling 50 year's and your close to the top level! Good job! Carry on!
Love how you explain everything in detail.👌👌👌
A lot of people could learn a thing or 2 from you on how videos should be narrated.
It is absolutely beautiful, i have the same model...just want to paint right away, really stunning work
My gosh, a masterpiece. Well done and great video!!!!
Great work with the airbrush. Nice colour
This is frigging gorgeous. I can only hope mine turns out a quarter as nice.
Excelente video y resultado de esta Pintura personalizada a Un Subaru Impreza WRX STI Mini Z de Kyosho, mis respetos y saludos desde Venezuela.
nice work, you make viewing a pleasure watching these videos, hope you have more coming!
I have these Tomica cars for now, that color looks nice, my favorite car.
This makes me really want to make a gold car! Nice work.
And btw, that gold looks amazing!!👍
Bonjour très beau travail comme d'habitude, je vous suis depuis longtemps ,même si je ne parle pas anglais, en regarder vos vidéos j'apprends beaucoup .
Merci beaucoup
Simply brilliant video!! Thank you very much for all of the info too.
10:10 Ahhhh! So that is how to do the decal panel line! And it is so simple. I have seen the light An X-acto knife instead of a toothpick. LET THE DECALS DRY before cutting. After, hit it with softening solution. You are a god. ;-)
Another beautiful paint job bro...
Great clean job , way to do it !! Bravo
Great job as usual. Do you clean the body with anything before clear coat? After the decal solution dries I sometimes see water marks or some other imperfection on my projects. I wipe the body with water and dry it before adding clear coat, not sure if I need to be doing that.
Yes. Sometimes with a damp microfiber towel
There was no video that explains how to paint Mini-Z body in detail... Thank you for your upload!
Oups just realized he never answer question... So nice work 👍
Whut……
@@TheScalemodelingChannel Thank, its just because i look all questions posted and i no see answer, not my intention to be rude ;)
Hola una pregunta el aerógrafo cuando terminas de pintar, con que liquido lo limpias...? hace mucho tiempo que voy siguiendo y sos el mejor pintando.
Love this works for rc cars
Great work! What psi did u use for spraying clear coat and what nozzle/needle size airbrush do u use ? Thank you once again!!
0.3 needle
29 psi
Nice job! Have you tried any automotive 2K clear coat as the Zero paints stuff works out pretty expensive?
Zero paints is automotive clear but then in smalles packaging
Awesome paint job ! What is the difference between Tamiya “fine” surface primer spray and the Tamiya surface primer spray ???? Anyone, please .. thank you !
I don’t think there is a difference
Amazing work... I want to do same 😁
Sorry for stupid question but do you think we can make same process on PLA 3d print body's ? I think yes but make need more polish first isn't it?
I heard just heard i never answer questions.. so lets answer this one.
You can do the same to a pla 3d printed body. But that needs a lot more prep work to get rid of all the 3d printing layer lines
@@TheScalemodelingChannel Thanks for your time to answer ;) Amazing work, congrats
Good afternoon, got a question for you. I recently started building plastic model cars again after several years of not doing it. Please remind me how long do I typically wait before wet sanding clear coat if orange peel developed? Love the vids, keep em coming!
Jorge Anzar greatly depends on what type of paint it is and how thick. To be safe, 1 week (excluding enamel paint )
Awesome! What was the mixing ratio for all coats? All sprayed at 14psi? 🤔 Perfect finish 👌
Same as on the package.
100% clear
50% hardner(if it is warm outside 40%)
5 to 10% thinner
Great video scale modeling
So for a “mist coat” first coat, should I keep a wet edge? Or just super light and not worry about that?
Don’t worry about that. The wet edge is for a thicker coat
excellent video are there carbon fiber decals for 1/43 scale cars? Or do they only come for 1/18 1/24 scale?
These are for 1:24
Very nice!!
Hello. I have a couple of questions. I use a can of Mr topcoat gloss to clear coat my models and I always see people sanding their clear coats with 3000+ grit sand paper and using tamiya or meguiars compounds.
1. Can I sand Mr topcoat and should I go about doing that.
2. Do I need to use a compound like meguiars after sanding
1. You can sand clearcoat if you want to create a smoother finish.
2. You can use that brand, but there are also many other polishing compound brands that can be used
When you spray with the air brush you constantly hold the trigger down for air to come out?
Cuz when I paint I pull it back then release and when start again it spits paint on the body
if you are using a double action airbrush it's best practice to constantly hold the air on and will stop the spattering, as the needle move back and fourth is how the paint flows through the gun, hope that help you out. best way i learned how to control better was doing constant practice of "basic" techniques lines-dots-dagger strokes it improves control so much. i brought myself a cheep A3 certificate frame and drew out a practice sheet that was visible through the glass off the frame that way i could just wipe the paint off the glass and go again quickly
@@scottyturner88 thanks for the advice I will try paint and constantly press for air
Beautiful
How many cfm’s does your exhaust fan pull?
4 cubic meters/min or 141 cfm.
Great video! Did you apply panel line accent or does it naturally come out dark? Thanks.
I did
Amazing, did you also spray the rear wing and mirrors? I hope he's not going to race the body but use it for drifting!
Indeed i did
How much psi do i need on 0.3mm needle? When painting base coat? Thanks
29
Sweet!
Are you using oil based acrylic paint?
I use laquers
Magnifique 👍👍👍
What kind of carbon fiber do you use? What do you recommend for a 1/64 scale?
I use scalemotorsport or scaleproduction
Do you paint mini z bodies for customers?
that is possible sometimes
Lucky friend
Does anyone know where I can get z28 camaro wheels in 1/25th scale?
Check Out eBay parts lots n God Bless.
Do you have to thin the paints by zero paints
no
Awesome !!!!!!!!!!!!!!!!!!
Please build a widebody gt86 im building one and i need tips and help
Is your decal wet?
Yes
Thanks!
Nice 👍
are you taking applications for mew friends? 😂
Probe the darkest depths of your soul and imagine the worst nightmare. Thats about what happened when I tried to do carbon fibre that size :(
I watched the funny and informative video well. You have a good hobby. Want to be a close friend.
우리 친구해요 🤩🤩🤩
What song is playing in the background?
Shown at the very beginning of the video. Lower left corner
@@TheScalemodelingChannel Ahhh ok got it ! Not only are you an excellent modeler but you have good taste in music as well. Thank you, looking forward to more of your video tutorials.
😎🤙
Clip is not include?
Clip?
Pls make an Lexus lLFA
👏👏👏👏👏👏👏👏👏👏👏👏
Beautiful...i would like so much to be one of your friends!!!!....(-:
One
Yeah, mines gonna look like 💩