The kenwood gps antenna is needed because they use the kenwood gps antenna if signal is good, if it's not, they activate the smartphone antenna. Check gps logo on android phone, if you drive into a tunnel it's going to be active, otherwise not. This to save battery when the phone in connected wireless and it's not charging then
You can with some extra work. I set up steering wheel controls/steering wheel and paddle shifters on my 2005 and created some write-ups for certain aspects of the job
Fantastic video, about to tackle this project on my XT with a Sony radio. Wish you showed a little more detail on the steering wheel controls though. There's one wire from the Axxess that I can't quite figure out where it will need to go before opening everything up - seems like it needs to connect to the i88 connector but I'm not clear on what the other connections on that are.
I have an 05 XT Limited without steering wheel controls. This looks too complicated for my DIY ability. Hopefully it doesn’t cost too much to get it installed
Some time after watching this, I now have a 907s in my 05 OBXT. Never bought a kit, I bought 2 units from Lithuania on eBay, butchered them and my stock unit, made 3 versions before final of abs welded and carbon fiber covered bezel/ controls. After this, I learned all the kits used on LH drive cars don't line up right. They do if you cut the abs from 2 units, and fuse them together.
I found the double DIN adapter kit that you purchased. I only want to install that and have the ability also of putting a double din stereo in my car. Do I need any special type of adapter or wire harness to be able to get this lower portion (climate control new unit) to work with what was originally in the car? If I do can you guide me where I need to go to get that harness?
Would you please tell me where you got the kit to fit this head unit because it is exactly the same as the australian version. I can buy one at a local supplier but it is aud 1100, about twice the price of the new head unit.
The climate switch and faceplate is a Subaru part - G3017AG01 Climate Switch. This was for Japan Domestic Market only and I had to order it from a Japanese vendor with an English website that shipped here. The Kenwood to Subaru harness was made by a shop that no longer exists but these are available from Car audio shops.
Wow, I've been searching for a priceless set up just like this ! Hi, my name is Richard, I'm a 58 year old mechanic (ASE Master Tech) from Vermont. I've been custom building Classic-cars, Hot-Rods, Harleys, Off-Road Trucks, and now at the age of 58, Turbo Subaru's ! Ha ! Ha ! Its always something ! Ha ! Ha ! I know this is an older video you posted 3-1/2 years ago November 2019, but I would LOVE to make this swap in my newly purchased 2007 Outback XT, Limited ! Are all these contacts & aftermarket parts still available do you know !? Of course I'll be checking into them immediately Ha ! Ha ! I just wanted to make friendly contact w/you because that's the kind & considerate thing to do when someone as kind & considerate as yourself who goes to these great lengths and then offers all the awesome info he finds to others on UA-cam, is respectful for sure ! Especially a "How-to" video, that is looks to be done CORRECTLY! My only remaining concern is how does the new Kenwood head-unit sound, in comparison to the HK head-unit, now that the Harmon-Karmen system is history !?? Does it sound better !? Are the sound controls on the Kenwood better than the HK !? I ask simply because the HK system was matched-up to the Amp under the seat & for an OEM sound-system, it sounds excellent. Especially the Mid & Bass levels & their controls ! The Kenwood is NOT matched up to the amp under the passenger seat. I guess I need to check the Kenwood DMX906S' spec's out & compare to the OEM HK head-units spec's to see how they match up. I NEED a good sounding system ! And these Harmen-Kardon head-units set a great sound-standard for an Outback for Gods sake, and are hands down excellent sound quality for being an OEM head-unit in a Subaru Outback ! (Limited) So, I definitely don't want to go down in sound quality by installing this same Kenwood head-unit. So, it sure would be nice to hear back from you. And get some of my questions answered, if you would be so kind. Lastly, A BIG THANK YOU to you, BIG TIME ! By you offering all this on UA-cam, saves someone like myself from spending the endless amount of hours searching for, locating & then confirming each part, each system, that you end up buying & using. Super time & energy saving ! Any other tips or challenges that you experienced along the projects way would be greatly appreciated ! Again, thank you so very much ! Looking forward to hearing back from you. if email is easier, mine is: mcginley.richard@gmail.com. My name is Richard.
I did this a long time ago but I still have this car (270000mi so getting to the end) . Buying Japanese market parts from a Japanese vendor that ships to US was the trickiest part.
@@compulsivediy8036 Hi, thank you for responding, but can you answer my questions please ! And what about the CD's that you're losing by replacing the OEM head-unit !?? Did you install a Remote CD player !?
@@rmcustom9573 CDs are in the past. We recently took all of out CDs to Good Will. I saved some hard to find stuff as audio files. This is fun to think about, I was a child when vinyl started being replaced by reel to reel tape (my parents had both) and now the CDs are gone. We live in fun times, so many people were born and died with a stone ax!
I just scrapped that 2009 car but I saved the harness and the climate control unit because of the memories of this video. Do you have a 05-09 Limited Legacy or Outback?
@@compulsivediy8036 hey man...I just saw your video, I m thinking of have the same work on my 2008 outback, do you have all the harness for sell?? if yes let me know what you have and mp me, thanks!
Can your steering wheel controls skip songs on your 906s while using Pandora, wireless CarPlay, and being on your head units Home Screen rather than the CarPlay screen?
I got the exact same setup but My Kenwood climate control Adapter doesn’t work on my car at all. Plugs in properly but screen won’t even turn on and none of the controls do anything. Anyone have any ideas why?? 2006 Subaru Outback - dual zone climate control.
Yes it does work. That Axxess ASWC really does detect the car and head unit on first power-up and self programs. It signals all that via LED blinks. Kenwood is different from other brands on how it connects to Axxess box with a single wire. Other brands have a dedicated remote control connector.
avojdm.com/dual-zone-av-panel-set-h6217ag911/ for the dash kit and you will also need special custom made wiring harnesses from here: www.autoharnesshouse.com/AHH-JDM.html. I just bought both and will be installing soon. Thinking of making a video!
I tried the ae64 website that he mentions for the wiring but the guy who runs that website is apparently slow to respond nowadays. This is why I opted for the autoharnesshouse website for the wiring. They were fast.
Of course a JDM part will be reversed from a USDM they drive on the right side of the car. That’s good that it converts Celsius to Fahrenheit so I don’t have to
You are the first person I’ve seen so this with the 09 limited outback. Thank you so much this is exactly what I needed!
The kenwood gps antenna is needed because they use the kenwood gps antenna if signal is good, if it's not, they activate the smartphone antenna.
Check gps logo on android phone, if you drive into a tunnel it's going to be active, otherwise not.
This to save battery when the phone in connected wireless and it's not charging then
Excellent. You should offer a service.
Really well done! I wish mine wasn't 05, and I'd love to have your setup!
You can with some extra work. I set up steering wheel controls/steering wheel and paddle shifters on my 2005 and created some write-ups for certain aspects of the job
@@jhsubarurepairsandmods8712 cool, where are the write ups?
@@vgnfab legacygt forum under how to install steering wheel controls, page 34. There is a pdf attached
I did this on my 2007 Outback Limited a number of years ago.
Fantastic video, about to tackle this project on my XT with a Sony radio. Wish you showed a little more detail on the steering wheel controls though. There's one wire from the Axxess that I can't quite figure out where it will need to go before opening everything up - seems like it needs to connect to the i88 connector but I'm not clear on what the other connections on that are.
Where are you getting your i88 harness? And or do you have a schematic so I can make it myself.
I have an 05 XT Limited without steering wheel controls. This looks too complicated for my DIY ability. Hopefully it doesn’t cost too much to get it installed
Some time after watching this, I now have a 907s in my 05 OBXT. Never bought a kit, I bought 2 units from Lithuania on eBay, butchered them and my stock unit, made 3 versions before final of abs welded and carbon fiber covered bezel/ controls. After this, I learned all the kits used on LH drive cars don't line up right. They do if you cut the abs from 2 units, and fuse them together.
I can see someone with CAD skills and a 3-D printer being able to put any unit in any car.
Where can I get the harness?
Could you possibly post or comment the links to everything needed to get this done? Greatly appreciated.
I found the double DIN adapter kit that you purchased. I only want to install that and have the ability also of putting a double din stereo in my car. Do I need any special type of adapter or wire harness to be able to get this lower portion (climate control new unit) to work with what was originally in the car? If I do can you guide me where I need to go to get that harness?
My car had the combined radio and climate unit and that is the only one i know about
Would you please tell me where you got the kit to fit this head unit because it is exactly the same as the australian version. I can buy one at a local supplier but it is aud 1100, about twice the price of the new head unit.
The climate switch and faceplate is a Subaru part - G3017AG01 Climate Switch. This was for Japan Domestic Market only and I had to order it from a Japanese vendor with an English website that shipped here. The Kenwood to Subaru harness was made by a shop that no longer exists but these are available from Car audio shops.
How has the high mounted reverse camera faired? Does it get dirty?
I would say it’s better than the lower mounted camera on my newer car, that back of station wagons does get dirty from the airflow pattern back there
The New 1.6 Firmware will activate wireless Carplay without VSS connected.
Wow, I've been searching for a priceless set up just like this ! Hi, my name is Richard, I'm a 58 year old mechanic (ASE Master Tech) from Vermont. I've been custom building Classic-cars, Hot-Rods, Harleys, Off-Road Trucks, and now at the age of 58, Turbo Subaru's ! Ha ! Ha ! Its always something ! Ha ! Ha ! I know this is an older video you posted 3-1/2 years ago November 2019, but I would LOVE to make this swap in my newly purchased 2007 Outback XT, Limited ! Are all these contacts & aftermarket parts still available do you know !? Of course I'll be checking into them immediately Ha ! Ha ! I just wanted to make friendly contact w/you because that's the kind & considerate thing to do when someone as kind & considerate as yourself who goes to these great lengths and then offers all the awesome info he finds to others on UA-cam, is respectful for sure ! Especially a "How-to" video, that is looks to be done CORRECTLY! My only remaining concern is how does the new Kenwood head-unit sound, in comparison to the HK head-unit, now that the Harmon-Karmen system is history !?? Does it sound better !? Are the sound controls on the Kenwood better than the HK !? I ask simply because the HK system was matched-up to the Amp under the seat & for an OEM sound-system, it sounds excellent. Especially the Mid & Bass levels & their controls ! The Kenwood is NOT matched up to the amp under the passenger seat. I guess I need to check the Kenwood DMX906S' spec's out & compare to the OEM HK head-units spec's to see how they match up. I NEED a good sounding system ! And these Harmen-Kardon head-units set a great sound-standard for an Outback for Gods sake, and are hands down excellent sound quality for being an OEM head-unit in a Subaru Outback ! (Limited) So, I definitely don't want to go down in sound quality by installing this same Kenwood head-unit. So, it sure would be nice to hear back from you. And get some of my questions answered, if you would be so kind. Lastly, A BIG THANK YOU to you, BIG TIME ! By you offering all this on UA-cam, saves someone like myself from spending the endless amount of hours searching for, locating & then confirming each part, each system, that you end up buying & using. Super time & energy saving ! Any other tips or challenges that you experienced along the projects way would be greatly appreciated ! Again, thank you so very much ! Looking forward to hearing back from you. if email is easier, mine is: mcginley.richard@gmail.com. My name is Richard.
I did this a long time ago but I still have this car (270000mi so getting to the end) . Buying Japanese market parts from a Japanese vendor that ships to US was the trickiest part.
@@compulsivediy8036 Hi, thank you for responding, but can you answer my questions please ! And what about the CD's that you're losing by replacing the OEM head-unit !?? Did you install a Remote CD player !?
@@rmcustom9573 CDs are in the past. We recently took all of out CDs to Good Will. I saved some hard to find stuff as audio files. This is fun to think about, I was a child when vinyl started being replaced by reel to reel tape (my parents had both) and now the CDs are gone. We live in fun times, so many people were born and died with a stone ax!
Links man. Plz update the description with links. For everything needed.
I just scrapped that 2009 car but I saved the harness and the climate control unit because of the memories of this video. Do you have a 05-09 Limited Legacy or Outback?
@@compulsivediy8036 I have an Outback limited
@@compulsivediy8036I do does this person still sell them online?
@@compulsivediy8036 I got an 08 legacy and I'm guessing it could work on mine cause it looks identical. Do you have the links?
@@compulsivediy8036 hey man...I just saw your video, I m thinking of have the same work on my 2008 outback, do you have all the harness for sell?? if yes let me know what you have and mp me, thanks!
Could you give a link on this JDM kit?
Can your steering wheel controls skip songs on your 906s while using Pandora, wireless CarPlay, and being on your head units Home Screen rather than the CarPlay screen?
I don't know about pandora but it does on youtube music
🍎
I got the exact same setup but My Kenwood climate control Adapter doesn’t work on my car at all. Plugs in properly but screen won’t even turn on and none of the controls do anything. Anyone have any ideas why?? 2006 Subaru Outback - dual zone climate control.
I was amazed at how well it worked, and it instantly switched t Farenheit too. I Wonder if you climate switch is defective.
Link for product?
Is the operator of AE64 still in business? I emailed him and never got a response.
I don’t know. He was a real expert, it would be a loss if he retired.
@@compulsivediy8036 Good news. I emailed him again and got a response. He's back in business!!!
Where in the USA cam I get this
Do you have a 2009 to 2005 outback or legacylimited?
@@compulsivediy8036yes I have a 2005 Subaru legacy GT
sell me the full asembly of th new system or the face only
Salam mən hardan tapa bilərəm
steering wheel audio controls work? you didn't show it
Yes it does work. That Axxess ASWC really does detect the car and head unit on first power-up and self programs. It signals all that via LED blinks. Kenwood is different from other brands on how it connects to Axxess box with a single wire. Other brands have a dedicated remote control connector.
He shows it starting at 0:17, that they do work.
Link for the in-dash kit?
avojdm.com/dual-zone-av-panel-set-h6217ag911/ for the dash kit and you will also need special custom made wiring harnesses from here: www.autoharnesshouse.com/AHH-JDM.html. I just bought both and will be installing soon. Thinking of making a video!
I tried the ae64 website that he mentions for the wiring but the guy who runs that website is apparently slow to respond nowadays. This is why I opted for the autoharnesshouse website for the wiring. They were fast.
Of course a JDM part will be reversed from a USDM they drive on the right side of the car.
That’s good that it converts Celsius to Fahrenheit so I don’t have to
Yes.si
Məndə Subaru Outback 2007 europa model
Clean Install, we will be at Knowledge Fest please check us out.