I just installed a DTuna on my red 1984 Kramer 2 weeks ago. I decked the Floyd. Easy installation, did exactly what you did in your video, I ended up using the shorter screw provided though. Love your new outrow!! Ranch 5150 Skinwalker! 😁 I knew what it was when I saw the wolf! Rock on Marty!
It all comes down to where that string is intonated. On all my guitars, the low E is intonated pretty far back, so i imagine most people will use the short screw.
@@Ranch5150SkinWalker What shame that someone would steal something like that off of a guitar. Hopefully you guys can check cameras or something amd see who it was.
I put one on my Floating Jackson with a licensed FLoyd, but blocked the trem first. You can put them on a non-decked Floyd, providing you block it from going up.
Good timing, I have to install my first dtuna on a guitar that's coming in about a week. I have Floyd rose on a few guitars. i just also bought my first low friction 500k pot. ill install that also.
@theophany1770 Those MW Signatures are unbelievable! Congrats on owning that! I'm pretty sure that they have a floating Floyd so you'd have to throw on a dive only trem stopper ($14 item) for the D-Tuna to work without throwing your other strings out of tune. You'd have to make sure that you have the clearance on the body also to support the D-Tuna mechanism. Cool axe!
Yeah it's awesome! Love Queensryche, 1991 show was amazing. You're right, it's a full floater so I'll be blocking it. Never done it but I've watched a few vids, doesn't seem too hard. Thanks for advice!@@DeputyVanHalen5150
I believe the proper way to tune with a D-Tuna is tune the low E to D (or hole step down) with the slide out, then push it in and fine tune with the small allen to standard.🤘😎🎸
I bought one for my Kramer about a year ago, and it’s been on my coffee table, in my lounge, as a reminder ever since. I just haven’t had the confidence to install it myself, so this video helps a lot. I also bought a trem block to stop the Floyd from floating, and I will install this first. A stupid question. So the standard fine tuning screw doesn’t get used at all anymore. Just the fine tuner on the d-tuna? Thank you.
@geoffreylowery9730 Check the screw and make sure that there are no burs on it, that can cause it to catch. If there are, just remove the screw and hit it with light sandpaper til it's smooth. Then try reinstalling it. Make sure your Floyd's fine tuner is backed off all of the way up. Also try pushing down the little metal tab under that low E underneath to add a little relief. I sometimes push the whammy bar down a bit too when engaging and disengaging the D-Tuna. 👍🏻
Great vid, Marty! I've got a Special. And (2) Standards. None of them have the D-Tuna. Thinking about maybe throwing one on one of the guitars. I hear they cause some tuning stability. So I'm not sure. But it might be cool to have one on at least one of the guitars. If I really dig it... maybe I'll do it on all of them.
It's a solid upgrade. They say more sustain. I kinda believe it's snake oil lol. I do know upgrades to the screws and stuff made with titanium is smart since they last longer and get tooled often.
i am getting ready to install the D tuna on my EVH Wolfgand Standard. you made it look simple. other videos showed tuing to D first then fine tune to E. Does it make a difference on which to tune first on the install?
Marty! I dont have the tension spring on E, as you have it and D tuna doesnt seem to sit nicely when i switch to D. Do you have any advice? because there is no tension spring, when i pull out the d tuna, there is aditional movement involved by pulling it out and outwards so it can rest on the screw. I think it is easier with tension spring.
Hi Marty, this of the D-Tuna is not a clear argument for me: are there EVH songs which needs a different tuning to be changed "on the fly" on the 6th string? I think this could be a "stupid" question for many of the channel audience (i apologize with the other guys if it is...) but I am not aware about this topic. Thanks for the video! And sorry for my english...
@lore5363 I have a D-Tuna on both of my Floyd Rose guitars. If your playing Van Halen songs Unchanged and Hear About it Later are a couple of songs that come to my mind right of off the bat. They use drop D tuning on the low E string. When your tuning is locked up by the locking nut it's so easy to pull the D-Tuna for D tuning and pop it right back to go back to E. So for $35 it's a must have for me. Just make sure that you have a non floating Floyd by decking it or using a trem stop. 👍🏻
People that do that kind of stuff are just losers can't do life right save up and buy it because it will come back to you one day ! Need one of those for my 1984 Kramer and IM GOING TO BUY IT 😂
That's a beautiful guitar, man, great video 🤘
Thanks man! I appreciate ya watching 🎵😎🍺
@@Ranch5150SkinWalker Absolutely, dude! 🤘
I just installed a DTuna on my red 1984 Kramer 2 weeks ago. I decked the Floyd. Easy installation, did exactly what you did in your video, I ended up using the shorter screw provided though. Love your new outrow!! Ranch 5150 Skinwalker! 😁 I knew what it was when I saw the wolf! Rock on Marty!
It all comes down to where that string is intonated. On all my guitars, the low E is intonated pretty far back, so i imagine most people will use the short screw.
It's a piece of cake! Oh and thanks man! Just doing some new stuff for the new year!
@@Ranch5150SkinWalker What shame that someone would steal something like that off of a guitar. Hopefully you guys can check cameras or something amd see who it was.
Awesome guitar 🎸
I want to put one on my Dave Murray Strat, it’s easier than I thought. Thanks man
I put a red one on my black wolfgang! Thanks Marty 🤘😊
Thanks Marty. I just bought a EVH Special. I don't do anything in drop D, so I'll probably take my D-tuna off now, thanks to your video.
Thanks for watching man! The D Tuna... it's really a cool gadget. It doesn't hurt to leave it there. Maybe one day you'll want to do some drop D. 😎🎵🤟🏻
I put one on my Floating Jackson with a licensed FLoyd, but blocked the trem first. You can put them on a non-decked Floyd, providing you block it from going up.
Thanks, I wasn't sure if they worked on Jackson Floyds
ok i am buying one. i didn't realise how easy it was to set up. thanks for the no in depth and brief tutorial
Good timing, I have to install my first dtuna on a guitar that's coming in about a week. I have Floyd rose on a few guitars. i just also bought my first low friction 500k pot. ill install that also.
Great I just installed one over the weekend now I’m gonna learn everything I did wrong!
I'm thinking of putting this on my Michael Wilton ESP LTD signature. Thanks man!
@theophany1770 Those MW Signatures are unbelievable! Congrats on owning that! I'm pretty sure that they have a floating Floyd so you'd have to throw on a dive only trem stopper ($14 item) for the D-Tuna to work without throwing your other strings out of tune. You'd have to make sure that you have the clearance on the body also to support the D-Tuna mechanism. Cool axe!
Yeah it's awesome! Love Queensryche, 1991 show was amazing. You're right, it's a full floater so I'll be blocking it. Never done it but I've watched a few vids, doesn't seem too hard. Thanks for advice!@@DeputyVanHalen5150
I believe the proper way to tune with a D-Tuna is tune the low E to D (or hole step down) with the slide out, then push it in and fine tune with the small allen to standard.🤘😎🎸
Perhaps. 🤷This way worked like a charm and seems to be consistent.
I bought one for my Kramer about a year ago, and it’s been on my coffee table, in my lounge, as a reminder ever since. I just haven’t had the confidence to install it myself, so this video helps a lot. I also bought a trem block to stop the Floyd from floating, and I will install this first.
A stupid question. So the standard fine tuning screw doesn’t get used at all anymore. Just the fine tuner on the d-tuna?
Thank you.
Great video again! What determines which saddle screw you use? Thanks!😊
Thanks Marty! My Dtuna seems a little catchy. Might need to looberup.
@geoffreylowery9730 Check the screw and make sure that there are no burs on it, that can cause it to catch. If there are, just remove the screw and hit it with light sandpaper til it's smooth. Then try reinstalling it. Make sure your Floyd's fine tuner is backed off all of the way up. Also try pushing down the little metal tab under that low E underneath to add a little relief. I sometimes push the whammy bar down a bit too when engaging and disengaging the D-Tuna. 👍🏻
@@DeputyVanHalen5150 thanks a bunch! I'll checkbit out
@@geoffreylowery9730 You're welcome 👍🏻
Great vid, Marty! I've got a Special. And (2) Standards. None of them have the D-Tuna. Thinking about maybe throwing one on one of the guitars. I hear they cause some tuning stability. So I'm not sure. But it might be cool to have one on at least one of the guitars. If I really dig it... maybe I'll do it on all of them.
Not a bad investment for about $35. They do come in handy at times. I'd say put one on one of them and see what ya think. 😎🤟🏻
I've had Floyds since the 80's with no issues, what so ever. any thoughts on getting titanium blocks? or if I have no issues is it a waste of money?
It's a solid upgrade. They say more sustain. I kinda believe it's snake oil lol. I do know upgrades to the screws and stuff made with titanium is smart since they last longer and get tooled often.
Great video,thanks🤘🤘
i am getting ready to install the D tuna on my EVH Wolfgand Standard. you made it look simple. other videos showed tuing to D first then fine tune to E. Does it make a difference on which to tune first on the install?
Awesome 🙌
Marty! I dont have the tension spring on E, as you have it and D tuna doesnt seem to sit nicely when i switch to D. Do you have any advice? because there is no tension spring, when i pull out the d tuna, there is aditional movement involved by pulling it out and outwards so it can rest on the screw. I think it is easier with tension spring.
Thank you
You're welcome man! 🙏
Great
Glad to help! 😀🎸
Hi Marty, this of the D-Tuna is not a clear argument for me: are there EVH songs which needs a different tuning to be changed "on the fly" on the 6th string? I think this could be a "stupid" question for many of the channel audience (i apologize with the other guys if it is...) but I am not aware about this topic. Thanks for the video! And sorry for my english...
@lore5363 I have a D-Tuna on both of my Floyd Rose guitars. If your playing Van Halen songs Unchanged and Hear About it Later are a couple of songs that come to my mind right of off the bat. They use drop D tuning on the low E string. When your tuning is locked up by the locking nut it's so easy to pull the D-Tuna for D tuning and pop it right back to go back to E. So for $35 it's a must have for me. Just make sure that you have a non floating Floyd by decking it or using a trem stop. 👍🏻
Drop Dead Legs and 5150 are a couple others
@@randellwillis many thanks for your answer. I Will look to check if there are Marty's video about! I'm New in the Channel 👍
Weird question: Do you think you could put 6 D Tunas on the same guitar and make yourself a poor man’s Trans Trem?
That made me laugh out loud. I suppose if they didn't run against each other.
@@Ranch5150SkinWalker When I’ve got a little more money to burn, I’m gonna have to try it. The madman’s approach 😂
Yes, D Tuna can be installed on all the strings.
Re: GUITAR WORLD 1995, with ACDC on the cover and EVH
RESPECTFULLY,
L. Albert Jackson Munoz
@@lauromunoz4692 Love the way you formatted this comment, even cited your source and signed it.
@@TylerJohnstonGuitar that would be a hilarious video
People that do that kind of stuff are just losers can't do life right save up and buy it because it will come back to you one day ! Need one of those for my 1984 Kramer and IM GOING TO BUY IT 😂
ripping off a 50 buck device in a store???????
D tuna is a gimmick...