This bike is a solid build. I just installed my Urmossi bar clamps. It they perform as well as they look, I will be stoked. My factory edition thumb throttle should arrive tomorrow. I need to make a video on the Urmossi products.
Thanks man! I’ve been very happy with the Urmosi bar clamp. Got them on a few quads now. They have held up well and I like the complete damping they provide. The Urmosi throttle is awesome too. Very comfortable, smooth and high quality. The adjustability is great. 🤙🏽⚡️
Thank you Robert! I really love the SBC720 Soft bar clamp and Factory Edition throttle. Currently in the process of outfitting our other YFZs with them.
Hey thank you! Ya know I didn’t necessarily buy the KTM throttle body for any specific reason other than it was the more common TB upgrade on the national builds. Now though all the pros are switching to the RP. We have the 45mm RP TB on the 2010 YFZ. It works great and got solid numbers on the dyno while paired with the RP intake, exhaust and Vortex. One difference between the KTM TB from Wienen Motorsports and the RP is that the KTM comes fully built. When you buy the RP you have strip down your stock TB and use the TPS, Fuel rail, injector throttle cable cam… No big deal, just nice to know. KTM is like $1200 and the 45mm RP is $620.
Could be where you’re looking. A search on Ebay will show you products from Alba, Tusk, Pro Armor, HMF, XFR, NICECNC. You can also check out Houser Racing, Factory 43 and Rath Racing. The last two are going to be the bumpers that you would see most commonly on the race track. Good luck!
I would say the Trash Panda will work very well and likely be easy to install being that it’s rubber and will flex a bit between frame and rear shock. It retains the factory air box which is good for filter concealment if that’s important to you. You can also run pre filter lids if you wanted. I’m sure it’s splitting hairs but the internal volume of the VisionAir is likely a bit larger due to the very thin but strong and light weight carbon fiber vs the rubber Trash Panda intake. The VisionAir is going to be lighter overall but it is definitely a bling piece in many ways. It looks amazing, fits well. Was a little bit of a chore installing and it’s a wide open box. Lots of pluses and minuses. Depends on how you’ll be riding. I will definitely be buying the VisionAir again for my next build! 🤙🏽⚡️ Good luck!
The numbers are pretty tame. 31 torque and 47hp. There are no internal mods and I’m running 98 Octane. Currently installed, RP race Pro full exhaust, Vortex ECU, Fourwerx VisionAir intake and Wienen Motorsports KTM throttle body. With these parts I get a reasonable performance increase with smooth linear power and am setup to start doing internal mods in the future. (Stock YFZ450R 38~ hp and 28~ torque)
I will say no not at all however it depends on your skill set. Machines come natural to me. But I would ask is it hard to create an excel spreadsheet. And for me it would be. 😅
@PowerLineRacing87 thanks, ive taken cars apart and done motor swaps I think I can do it, I'm guessing plastics, harness, drain coolant, pull motor n Trans then suspension, arms and rear end leave axle in sound correct?
@@pnwatv5094 yah it depends on how deep you want to go. Like if you want to powder coat the swing arm you’ll have to fully disassemble the axle, carrier and pivot bolt bearings/sleeves.
I ride 2 wheels now but grew up on quads. I can appreciate a nice build when I see one…and this is one. 👏🏻
Thanks! It was certainly a labor of love. I grew up on dirt bikes then switched to quads. Haha
That quad belongs in a museum or art exhibit. Nice work! I know how much effort goes into this level of build
Haha, thank you. 🤙🏽⚡️
That YFZ 450 is so mean💪🏾💯🔥
Thanks dude!
Freaking sick man. Let’s see a ride vid!
Thank you! I’ll have some ride footage up soon.
the yellow coolant hoses look insane. Looking at your quad makes me want to get into racing
Thank you! It rides as good as it looks. The PEP shocks, Roll Design A-arms and Walsh swing arm are unreal. 🔥 Do you fly helicopters?
@@PowerLineRacing87 I do, for a living. I grew up with a banshee, rode it at tracks, Now I just do dirtbikes, but would love to get a yzf450r.
@@nastysoda9212 So cool. I use to be a commercial helicopter pilot! Yah the Banshees are wild! You will love the YFZ450R. It’s such a fun machine!
This bike is a solid build. I just installed my Urmossi bar clamps. It they perform as well as they look, I will be stoked.
My factory edition thumb throttle should arrive tomorrow. I need to make a video on the Urmossi products.
Thanks man! I’ve been very happy with the Urmosi bar clamp. Got them on a few quads now. They have held up well and I like the complete damping they provide. The Urmosi throttle is awesome too. Very comfortable, smooth and high quality. The adjustability is great. 🤙🏽⚡️
@@PowerLineRacing87 nice to know. I'm close to completing my banshee build. Will be putting out some riding content soon
Excellent looking build! Exited to see it in action
Thank you Robert! I really love the SBC720 Soft bar clamp and Factory Edition throttle. Currently in the process of outfitting our other YFZs with them.
SICK 😎
Thanks!
Why the KTM throttle body over the RP? Great looking machine btw.
Hey thank you! Ya know I didn’t necessarily buy the KTM throttle body for any specific reason other than it was the more common TB upgrade on the national builds. Now though all the pros are switching to the RP. We have the 45mm RP TB on the 2010 YFZ. It works great and got solid numbers on the dyno while paired with the RP intake, exhaust and Vortex. One difference between the KTM TB from Wienen Motorsports and the RP is that the KTM comes fully built. When you buy the RP you have strip down your stock TB and use the TPS, Fuel rail, injector throttle cable cam… No big deal, just nice to know. KTM is like $1200 and the 45mm RP is $620.
What brand are your wrap around hand gaurds...bikes beautiful
Thank you! It rides even better than it looks. The hand guards are the Cycra Ultra Pro Bend CRM.
Please, the sound RP RACE.
Totally, I can put up a video of it. I’ll do a live comparison of The RP Race Pro vs the RP Race standard and The Dasa shorty. 🤙🏾⚡️
Why is finding a bumper for these models a pain in the ass, I keep finding Raptor 700r bumpers
Could be where you’re looking. A search on Ebay will show you products from Alba, Tusk, Pro Armor, HMF, XFR, NICECNC. You can also check out Houser Racing, Factory 43 and Rath Racing. The last two are going to be the bumpers that you would see most commonly on the race track. Good luck!
Need one.
Yah! It’s a blast!
Trying to decide between the forex visionair intake or trash panda. Any input?
I would say the Trash Panda will work very well and likely be easy to install being that it’s rubber and will flex a bit between frame and rear shock. It retains the factory air box which is good for filter concealment if that’s important to you. You can also run pre filter lids if you wanted.
I’m sure it’s splitting hairs but the internal volume of the VisionAir is likely a bit larger due to the very thin but strong and light weight carbon fiber vs the rubber Trash Panda intake. The VisionAir is going to be lighter overall but it is definitely a bling piece in many ways. It looks amazing, fits well. Was a little bit of a chore installing and it’s a wide open box. Lots of pluses and minuses. Depends on how you’ll be riding.
I will definitely be buying the VisionAir again for my next build! 🤙🏽⚡️ Good luck!
How much hp on this ? Gotta be close to 60 ish with all those mods
The numbers are pretty tame. 31 torque and 47hp. There are no internal mods and I’m running 98 Octane. Currently installed, RP race Pro full exhaust, Vortex ECU, Fourwerx VisionAir intake and Wienen Motorsports KTM throttle body. With these parts I get a reasonable performance increase with smooth linear power and am setup to start doing internal mods in the future. (Stock YFZ450R 38~ hp and 28~ torque)
Is it difficult to take the quad apart for powder coat?
I will say no not at all however it depends on your skill set. Machines come natural to me. But I would ask is it hard to create an excel spreadsheet. And for me it would be. 😅
@PowerLineRacing87 thanks, ive taken cars apart and done motor swaps I think I can do it, I'm guessing plastics, harness, drain coolant, pull motor n Trans then suspension, arms and rear end leave axle in sound correct?
@@pnwatv5094 yah it depends on how deep you want to go. Like if you want to powder coat the swing arm you’ll have to fully disassemble the axle, carrier and pivot bolt bearings/sleeves.
Whaylt steering stem is that and is it +2😊
Yo, this the Houser Racing steering stem. It’s a +1. It looks extra tall because the Urmosi 720SBC bar clamp is a fairly tall unit.
how much in total
High 20s