I Finally Bought a Yamaha YFZ450 Quad! INSANELY POWERFUL
Вставка
- Опубліковано 17 лип 2021
- I finally end up buying a Yamaha YFZ450. I break it the first ride. #Yamaha, #YFZ450, #Quad,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.com/community/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
What do you guys think I should do with this quad?
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_
Thank you for the support!
If you know a good Tig welder they may be able to fix that case but would require splitting the motor but if your going that far may Aswel replace the whole case. I have had a few mates that have had them and lack of maintenance and many hours they can throw a rod and when they do they go straight through the crank case. If your going that far with pulling it apart I'd replace the crank and throw a high comp piston in it. But great score, over here in Australia there fetching $6000+ even in rough condition
Sell it unless you race
@@toddphillips824is that even a race quad ?
@@Guadzilla459 yes it is ! I have one also super fast !!
@@toddphillips824 why sell it . They are awesome quads
I had a 06 and my rod bearings went down. They were known for bottom end failure. Yamaha updated the oil pump in the bottom end in 2007 and up on the YFZ. You can get a oil pump conversion kit cheap that goes in the right side crank case. I would really recommend it.
Otherwise the best 450cc race/sport quad ever conceived!
I gotta give this young man a thumbs up on every one of his videos simply because he is out there doing it, learning along the way and making a little $$ too. But I must say one mans mint condition is another mans clapped out pile. Very few bikes or atvs on this channel have truly been mint condition and ran as such. No Hate or trolling just a little constructive criticism from one atv/bike lover mechanic to another.
True ...but he gets a ton of em!
That's honestly why I watch his channel tho... He buys and fixes stuff that most people would have little interest in bothering with. Then he shows you himself fixing it on a shoestring budget and getting some decent work and results in the process. Anything can be fixed, and I love seeing someone out there dedicated to do it with bikes and atvs.
@@twowheelterror2925 Yes, I really enjoy learning how to rebuild those simple motors, it's great. He's really good at it too, thanks 2vintage!
That's awesome. I own one myself. (2004) It really packs a punch. Has a lot of power!
Just got back into quads after taking about 15 years off. Going to pick up a yfz450 soon. Awesome pick up ! My brother had one back around 07 and I remember it being crazy fast !!
the only thing i dont like is no air box dont care what anyone says rather have stock airbox on it with a good air fiter n holes in the lid
That air filter definitely lets some silt in. Doesn’t even look oiled to me
Please don't ever put holes I'm an airboc dude that owned one of my bikes before me did it is so stupid and does nothing
@@linkinpiatak6669 dude seriously takes a water protector and makes it useless
Mr. Clean magic eraser will be your best friend on that white quad. It will look brand new once you clean it up. I’ve owned a white 2004 YFZ 450 for the last 15 years and it looks brand new still.
Make sure your idle is good, it's had a pipe upgrade, make sure it's jetted right, these 450s are monsters if done correctly, this one seems like a gem, no smoke, like I said check the jets? Good buy brother!
I had one. By far the best quad I ever had. It’s a keeper at that price for sure.
Welcome to the yfz family! Best race quad out there! We are making our first trip out to black river falls and dyracuse atv park in wisc here real soon you should come bro!
Yamaha makes the best sport ATVs by far!
Went there when I was younger with my dad, uncle and cousins, it’s pretty awesome there haha
I love this looking amazing and very fast I used to have yz450f miss it wish never sold it, good luck hope you get it fix and running good bro 😎
I would do away with that so called racing intake and go for the stock air box cause that junk will suck in water and dust and wear out the top end prematurely
yup... taht is just dumb doing that... just put a cone filter in the oem airbox...
I’d do that or get if they make one for carb model an fuel customs intake with box
If you get real muddy when riding, put an air box on there. I’ve always been happy with K&N or Uni. Stock is, well stock, but will get the job done. Yamaha is on top of their game. Ready for Honda to join back in with an upgraded EFI 450R… get some competition going again! Keep it up, boss!
@@leejennings173you’ll be waitin awhile on the hondas. how are the kawasakis? i’ve always liked their dirt bikes but in lookin at trying out a four wheeler for the first time. but i’ve never heard a lot about kfxs almost like they didn’t make a lot of them.
Dam dawg that's a bad ass quad are you doing this as a full time job you bin putting out a lot of good content
Let’s go love thya vids keep it up man
Dream quad! Always wanted to get one but other things come in the way. Absolute beast!
The quad is mint good solid quad just bit work here n there be perfect keep up the good work been follwing for ages now always good content
Hopefully someday you can ride other places besides roads,fields and lawns . Go to track or some trails have more fun 🏁
Yea a tracks or orv park of some kind
@@joe212 ya being a mx racer for 25 years seeing him ride up and down road drives me nuts lol good kid tho he's learning
Idk guess it's a matter of perspective but im kind of jealous of all the land I see him riding around on. I live near the city where they ride quads and dirtbikes in packs of 20-30 in a congested area on the road. Cops can't chase them if they run either
@@thetwostrokerebuilder im the same I've been riding 25 or 30 years racing atv mx also
I think he should purchase some land just for videos would be cool like 10-20 acres
This is by far one of the nicest wheer's you have gotten and a really great price. Looks like spectre air filter not K&N. Take quad to a local welder that welds aluminum they could weld that side case thats repairable. Check grounds first and check stator for oil or rust, both easier to check
Being able to work on stuff is awesome. You can buy stuff that doesn’t run pretty cheap,fix it up and then you have a well running machine for a fraction of the price of a new one!
You will never regret only that four-wheeler. I've never had one but my good friend had one for a while and he regrets getting rid of it. I have gone to his house to work on it a few times as far as the carburetor goes. The thing is absolutely ridiculous. He's had a lot of fool willers and that one by far was the fastest. It would walk the dog mess out of every other Fuller and dirt bike he had. Has no hesitation on take. The thing is an absolute beast. An absolute wheelie machine.
Looking forward to the Tecate 3 wheeler video.
Superb can’t wait for the next episode 👍🙏🍀🏍
I absolutely hate when people don’t buy case savers. It’s literally one of the cheapest mods you can do. Keep up the great work man can’t wait to see this yfz all fixed up 🤘🏻
The YFZ had one factory too lol
i made a mistake and didn’t buy a case saver for my yfz and now i had to replace it so now what ever boke ima buy i buy a case saver
Ya agree but sometimes it hard to find case savers for some quads
@@jordandarcy3329 warrior 350 or raptor 350 is almost impossible
DRW performance guys. Westin has ever case saver for all sport quads. They are all in the 20 dollar range. A must have imo.
Good vid, dope quad and you were ripping 🤟
I got my 06 yfz back I'm 2015 for 2100. Nothing was wrong with it. Ran like a champ ready to go to the races and still does today. Only think I replaced was stupid clutch cables that always went out fast for me. Then the oil o ring up at the clutch lever pivot arm. Great dang 4 wheelers man especially mine only being 9 years old for 2100
Yeaaaa ready for part two
I love this content keep up the good work
Finally man now you know the real feel of power!
The reason it smokes is from that k&n air filter..don’t ever put a k&n filter on anything unless u keep it oiled and then they still let fine dirt in the engine trust me I’ve seen it many times.
Yes they do. When you can see light through holes even sand will pass. They should be called bug catchers. Bout all they do.
They suck!!!
The K&N let's more dirt in and wears rings out faster. Not worth it for the minor increase in power.
Joe I recommend putting loc tight on the screw for the petcock knob it vibrates out .
Since it's a 2006 need to check for the oil squirter mod, if not you can damage the bottom end
The 400ex was always a good tail goat. The 450s are where its at if you want to race
Probably the nicest quad you've ever bought. I want one of these brand new lol
Awesome vid and edits and filming and bikes
FINALLY THANKS JOE!!!!
I can tell by the sound that clutch need adjusted nice find man 👍
Almost at 200k !!
The tires on the stock wheels were also a set of holeshots lol
2100 is a damn good deal. Now theres only one more quad you have to try LTR
bought a 04 yfz 450 last summer for $2000. It ran good when I bought it, had a kicker from a wr 426 and felt like it had great compression and started right up. Blew up an hour after I got it home. I don't remember if the 06 has the stock oil mod, but look up J&T OIL MOD.
Nice find at a great price! 👍
Wow that was cheap your right on the $4,000 price range that's what they go for or $5,000 where I'm from, you got a nice quad, I like yfz450's awesome video man & great fine can't wait to see what you get next
I would replace the timing chain while in there and possibly guides.
nah
My daddy always used to say if it aint broke don't fix lol.
@@jwilliams9611 your dad ever own a 250f?
@@johnnyjohnson2942 Unfortunately no it was just a saying though. But the video is about YFZ450R not A 250F Just saying.
@@jwilliams9611 the chain is like $30, or risque a complete engine? I'll go with the çhàine every time I'm in there.
Nice Quad I finally had a chance to ride my 🦖 cbr600 swapped yfz450 and I absolutely love the yfz chassis especially with 100+ HP lol
i currently have a big bore kit on mine and it rips 💪
You might want to put a outerwear over that filter to minimize the water intake it will also keep your filter clean longer. Much easier to clean the air filter cover. The red light is to tell you when the water temp is to hot it will come on when you turn the key on or start it for a few seconds to let you know its working.
Had the same year back in 2017 bought it blown up completely grenade it rebuilt the whole engine put new tires on it and it was really really fast good four wheeler they say 07 and under didn’t have the oil squirter in the top in and they always bloom up when getting really hot
Those early model yfz s dont have oil squirters for main crank bearings they can seize up easy do an oil mod on it to keep crank bearings from seizing up
In my knowledge with 450 quads. I have a kfx450r. And when my valve seals went bad. It smoked a little. As I was making my way back to my house it was so bad that it was bogging under maybe 1/4-1/2 throttle. I’ve found it easiest to get a top end kit with the valve seals. Take the head off. And change the valve seals on a bench. Based on the way that quad moved around lol I don’t think rings are bad. Can always compression test.
Make sure you do the cam mod, and fuel customs air intake kit, holy cow hold fast!!!!
Not smoky enough joe! Probably valves need adjusted or a valve seal. Doesnt seem like a big issue to me. Sounds healthy
Almost enough to smoke out the mosquitoes
Sick bike Joe
Hey joe, buy some alumaloy rods and fix the case yourself. You use a propane torch to melt the rods. Works great
Lots of torque in that 450!!
Has a lowering kit on the front. A good case savor will prevent that. The oem case savor will damage a case like that ever time
I bought a 2018 SE a few months back. I put a fuel customs intake, Vortex ECU and Dasa full pipe on it. Quad is fast as heck. It rips. I love the way the quad handles. I can push it hard and it handles pretty much anything even with just stock suspension. I will probably put aftermarket a arms and shocks once I do a full rebuild. Stock is fine for aggressive trail riding though.
The older carbed models like the one in this video are substantially quicker than the fuel injected ones....the fuel injected ones handle way better tho
@@KrustyQuad I always thought the same thing
Congratulations nasty quad I just got one yfz450r 2017 pretty cool
Man you get killer deals...I wish I had your skills
Check your CDI box on it bro. Get A gold racing one instead the factory one seal it inside of A Ziploc baggie.& zip tie the open end close were the plugins go together.,or add A cut baggie over the first baggie for water protection.
Finally you bought the beast man . You might as well keep that one bro. You can continue to build it yearly and race it
The only riding he does is in his back yard and the road out the front house
They are the most stable quad and can be hard to wheelie because of it! They really only like being in the R's
I’m doing a top end rebuild on my yz85 I bought it as a project bike I love working on them
Thats a great deal & looks perfect so far, they are the top race quads out, what do you do for work? just repair & flip, should open a little shop
Damn that quad is a beast!!
I have an 06 yfz I’m rebuilding and I one of my case halves did not line up perfectly with all the holes and dowel pins. They’re manufactured as one so it might need a whole new case unless you get lucky
When u fix the oil problem get a case saver cause the chain came off and went through it
I own a 2008 yfz450, and you gotta ride it super hard and get it super hot, like the exhaust glowing. Before the fan will ever turn on.
Yeah the exhaust will be super red by head
Good looking quad I like those yamahas
2v timeeee. Lucky! Sick quad
Yamaha YFZ450Rs are incredible quads! Prob best all around sport /race quad in 450cc range ever.
Do yourself a favor and adjust the front shock springs for maximum softness(move the spring retainers up)
You can try some lucas&stop leak mixed in with crankcase oil for the pistion oil ring seals.,or you can spray WD-40 into your fuel tank. WD-40 will free up anything that is stuck.,or even some PB-Blaster spray will to.
i would inspect the case halves well and maybe look into buying a matching set l and r... have had issues only replacing half.
Yep cases are usuly matched amd machined together so if you want equal tolerances on both sides you should replace it all.
i’m getting a brand new one sometime within the next month
i agree putting engine cases back together with rtv is not minty repairs
Slap a really good CDI and carb on it bump the timing a bit and that thing will really rip lol Definitely a awesome quad and we'll worth going through 🔥👍✌️
My buddy had a like new bone stock perfect KAWI KFX 450R quad a few years ago for 2500. I beat myself up everyday for not buying it. These 450 quads hold their value.
DRW Performance has some amazing case savers Joe..
Also the stators go bad one those to bro. Just A heads up to you on it. Good luck with.
I miss my 06 yfz! I traded it for a 2003 Silverado with an ls 5.3.... It was a good trade but damn i miss her! 06 is the fastest year imo. Mine had an athena jug, kibbleworth valves, hot cams stage 2, hot rod crank, fmf pipe ect ect ect.
I have a 04 love it!!!
you should try it with a twist throttle, i got an 04 with a twisty.
I'll setup up my cam on the chest rig and give her a rip. The fan only runs for a few seconds and you have to be bloody reddening the thing for it to kick in.
2008 Kawasaki kfx-ksf450r is a unreal machine I’d say best 450 quad out….
I agree, KFX 450r is the best 450 out there,
The chain snapped and he did not have a good saver and now you should get that fixed ASAP.
Crankcases are machined at the factory as a pair so should be replaced as a pair. If you strip the engine a good welder could probably fix that damage. With spark issues I'd start at the plug and work back. The cdi should be the last port of call. Could be the coil breaking down once hot. Do the cheap stuff first.
Yah I was just looking on Rockymountainatvmc at there oem diagrams and parts. Looks to be a matched pair, can't buy left or right like on say the 400ex. Showing plenty in stock for $381.12 on the yfz crankcase assembly. They got the oem stator cover in stock as well. Idk if I was keeping it I'd just patch it and send it. If it was a re-builder then yah fresh OEM only way to roll
Take the lowering kit off the front shocks
Can you work on the carburetor i need to see if mine is set properly I have the same year quad
They’re such fun bikes. I got mine for 2k Canadian. There’s nothing left to do to the thing besides nos or turbo lol. I’m lucky I got it that cheap
You have seat up Vintage test track to start running all these quads around. Have a time board.
JUST DO IT as what's his name said.
i like those graphics were those from i tried looking up duncan but nothing popped up i got a 05 yfz really clean i want those graphics 😂
You should do the cam mod and remove the air box lid, jet to a 170 main and it's a night and day difference
Finally time !!
the perfect person for it to go to, atleast he can see where it goes and watch it on youtube
Make sure you have the oil mod done to it.
Got mine about 4 months ago a blast to ride. I’m upgrading mostly everything at the moment due to crank bearing locking up. I would rebuild the 450 you just picked up or keep ya speed way down
Just cause the crank locked up on one doesn't mean it's gonna lock up on another lol... yfz's are super solid unless you have a 04 or 05 which need the oil mod to be reliable
You need the Ltr 450 that would be a awesome video
Definitely needs rings smoking pretty good actually
Or just from being to wet. Try using A hairdryer on the stator area first.
Weren't there certain years that 2 different manufacturers were producing pretty much the same machines? Wasn't it Suzuki & kawasaki?
Regardless, these vids are great. Think I'm gonna sub up, sir!
Ya always should check the lock on grips. Probably shut off due to valves