Nice! Very well Explained!!! Thank you for the Time and Info! I have the 2014 Malibu LT 2.5 as of right now it has Just under 80k mi. on it and after a 300 Mi. drive to down state NY and back up again, two days later the Dumb ABS " Service Stabilitrac " light came on..... I'll scan it with my Foxwell NT 301 OBDII
My abs and my traction control light is on also in my rf when I just before i come to a complete stop there's a knocking sound and it stopped and its starting on my LF. I have my abs/traction control sensor. I did had my previous employer use the code reader and that's what it said.
Thanks for the video. I gather each wheel has these sensors? My light and screen warning comes on when I hit a bump or drive the car for a bit. Hitting another bump and turning off the car resets the code or moves that loose ring? Could it be just a loose connector? Anyhow thanks for the description and the video of where these are etc. I wonder if the code specifies the wheel?
A bad cv axle can also make the traction control light come on as well happened to me last year same car when you hit a bump is it excessive noticeable play in the wheel ??
I’m having this issue. When the stabilitrack light comes on the car jerks when pressing the gas and cuts off as soon as I come to a stop. Could this be the same issue?
You are probably getting all these lights because the key is in accessory position if you turn the key it it won't turn over you likely have a problem either with first check battery and ground wire, then check see if starter is getting power. If no power to starter maybe key or immobilizer problem or fuse box
@@mikecarz90 I can only be so helpful not be ar the car I would make sure you have good ground. If you know how to check the grounds with a meter you could also check power side. It would also be nice to plug in a scan tool and check for codes.
Nice! Very well Explained!!! Thank you for the Time and Info! I have the 2014 Malibu LT 2.5 as of right now it has Just under 80k mi. on it and after a 300 Mi. drive to down state NY and back up again, two days later the Dumb ABS " Service Stabilitrac " light came on..... I'll scan it with my Foxwell NT 301 OBDII
How’d it go? I shit you not but I have damn near the exact same mileage and problem that occurred the exact same way
@@Daymond777Gaming The FoXwell NT301 doesn't do ABS .. I just got the Innova 6030P . Will Let you know !!!
@@frankb518 thank you!
The most helpful video!
smooth content
Thank you so very much.
My abs and my traction control light is on also in my rf when I just before i come to a complete stop there's a knocking sound and it stopped and its starting on my LF. I have my abs/traction control sensor. I did had my previous employer use the code reader and that's what it said.
Cameras to close start off far then go . See we get better visibility of where exactly it is. Explained well, just saying.
Thanks for the video. I gather each wheel has these sensors? My light and screen warning comes on when I hit a bump or drive the car for a bit. Hitting another bump and turning off the car resets the code or moves that loose ring? Could it be just a loose connector? Anyhow thanks for the description and the video of where these are etc. I wonder if the code specifies the wheel?
A bad cv axle can also make the traction control light come on as well happened to me last year same car when you hit a bump is it excessive noticeable play in the wheel ??
How to diagnose which wheel without pulling all 4 wheels
Can a bad tone ring somehow be related to a rough idle/rpm surge when weather is 85-90°
No not related
I’m having this issue. When the stabilitrack light comes on the car jerks when pressing the gas and cuts off as soon as I come to a stop. Could this be the same issue?
How you fixed? My car has the same issue. 2015 chevy malibu
Following this comment my vehicle is doing the same as well need help with some answers
Same has anyone fix it I changed wheel bearing still doing the jerking
I have the abs and stabilitrack light on but car wont turn on it wont crank or anything
You are probably getting all these lights because the key is in accessory position if you turn the key it it won't turn over you likely have a problem either with first check battery and ground wire, then check see if starter is getting power. If no power to starter maybe key or immobilizer problem or fuse box
I just put in a new starter checked all the fuses in and outside of the car
@@mikecarz90 I can only be so helpful not be ar the car I would make sure you have good ground. If you know how to check the grounds with a meter you could also check power side. It would also be nice to plug in a scan tool and check for codes.
@@liftittotheroof1876 ive plugged in a scan tool but theres no check engine light and my dash says check power steering drive with care
I really appreciate your help
Can this cause the car not to turn on
No
Lmao