PAINTLESS DENT REPAIR FROM START TO FINISH? | PDR | By Dent-Remover
Вставка
- Опубліковано 12 чер 2024
- In this video I take you through all the repair steps in as much detail as possible from the estimating stage to the last push and polish, and even how much it could cost!
So you can see how a PDR is carried out if or when you get a dent on your vehicle
Hi my names Martin Sadler and i'm a Dent Repair Expert From Dent-Remover in Beverley, East Yorkshire…. This time I'm repairing a 2019 Ford Transit Custom front wing (Fender) as it has quite a noticeable dent and a few other smaller ones which need repairing
Also at the end of the video you’ll see the finished results and a new chapter to the video is How much a Dent like this would cost in the UK🇬🇧
Note,
Prices shown are from a UK matrix on MTRX (Mobile Tech RX software) the facts of the repair upon initial estimating, time and date of the repair (03.12.21) and the integrity of our company Dent-Remover, Prices will vary between companies and locations, Based on the estimating matrix used
Are you a Dent Technician wanting to know more about MTRX?
Heres a referral link for you to get started
www.mobiletechrx.com/?grsf=pw...
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 Intro
00:51 Inspecting the damage
03:06 Removing trims for access
03:33 Inspect the access
04:29 The FIRST push
05:20 Repair the top bodyline
09:28 Repair the middle bodyline
15:30 Repair the bottom bodyline
18:57 Smooth out the crowns
20:02 Top Tip!
21:09 Repair the small dents
22:06 watch the dent dissapear
23:00 Refit the trims
23:20 The conclusion and results!
25:15 What was the cost for this repair?
28:08 End screen
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All tools used can be purchased from
kecotabs.co.uk
Soundtrack by Epidemic Sounds
under liscence
Only for you, By Tall Oak Town
Do or die, By Wellmess
Mystic woods, By Mike Franklyn
Lunch break in Milan, By Trabant 33
Out of her mind, By Parellite
Standing naked, By Sven Karlsson
Heart goes numb, By Coma Svensson
A million miles, By Coffee and Cats
Sweet mirage, By Wellmess
See you soon!
#PDR #DentRemoverBeverley #PaintlessDentRemoval #EastSide#ThoseDentGuys #DentRepair #cardetailer #automobile #C4f1 #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler #kecoUK - Авто та транспорт
I love watching your videos Martin... I always learn something and get new ideas for my own PDR work. Your explanations are so clear and concise, and there's no wasted time or nonsense in your videos, just pure expertise everytime! Cheers from NC, USA 🙋♂️
Hi Mitchell thank you for your kind words. I’m not too good at talking nonsense while I’m trying to fix a customers car especially on camera! But I love to offer any help and tips from what I’ve picked up in the past because we’re always learning even the simplest things can trigger your brain and that’s all that matters.
I hope your busy, and safe from all the storms
And hope you have a great Christmas
I discovered your channel today and I can't stop watching your videos. Nice work! Cheers!
Hi Alaskan thank you!!! That’s awesome to hear and I’m very happy it’s good content to binge watch!
Please let me know what you think about the other videos
Thanks Martin
Dent Squad !!!!!!! Amazing mate, really informative, great for customers & techs alike….
You’re my boy blue ….. you’re my boy 🙌
Thanks Bossman! Appreciate your kind words
I have watched many PDR instructional videos but your videos are the BEST !!! Thank You for making these Videos.
Another top job Martin! great to see you doing what you do best 👍😉
Eyup Jake! Thanks hope your well ?
@@dentremover01 Getting there mate, making some slow progress, 👍
Outstanding repair, thank you for sharing your knowledge with us, learning from one of the best is a pleasure.
Hi Victor thank you! My pleasure I hope it helps technicians out there, always learning
Thanks again
Martin
Awesome repair Martin! These vids help me with keeping my dents clean. Thanks for posting! 👍👊
Hi John, wow thanks that’s great to know I can help out in any way. I think when you see other techs working you can pick up tips etc which is always a great thing. Thanks for watching and enjoy the video
All the best, Martin
Great work Martin as usual!.. 👍 Your video angles are excellent and informative, which is not easy when doing a repair.
All the best mate 👍
Hey thanks for your kind words. I try my best to show as much detail as possible and yes it takes a while to do the repair while filming!!
Thanks Martin
Martin, nothing new, phenomenal as always 🔥🔥
Hey Sleman thank you!! I try my best and to be honest I really enjoyed making this one ! Dent came out really nice too!
Hope you and family are well?
Very nice repair Mate , spot on 👌👌👌👍💯💯💯 big thanks for sharing 😊👌💯
Nice work. Your face though when you pop the main dent out. love it.
Hi Dennis yea it was quite a surprise lol I’m just glad it didn’t crack the paint. Really enjoyed the repair and making the video! Plenty of out takes!!
Martin great job as always amazes me how paint has so much flex keep up great work mate 👍
Hi Dave! It amazes me also! Some scary moments when fixing damage but the paint is super flexible….
Fantastic repair again Martin
Hey James! Thank you hope your well buddy?
@@dentremover01 I am buddy thanks in cromer at the moment Weymouth next week then Eastbourne for Xmas as n new year
Hey Martin, excellent video and amazing work as usual 👌🔝 Another Big Thumb for you 👍👍 Cheers!! 🍻
Hi Francisco thank you very much sir! I really enjoyed making this video! Hope your well?
Loud pop! NICE release
Hi Brian! Yes that certainly caught me off guard!!
Amazing señor
Fantastic Repair Martin 👏🏼👏🏼
Thank you Mineral 🙌🏼
Top notch repair 👍👍
Thank you Corey!
Great video Martin, really useful showing how the you work out the price for the labour and repair too.
Hi Graham thanks for your comment. Pricing the repair is part of the job and I think it should be shown more often 😊
Great repair, great video 👍🏻
Thank you Shane
Спасибо, достойный урок!
Loving every minute it big guy Hey what kind of markers do you use . Fantastic job
Martin where are you? waiting for your videos!! Im learning PDR and your videos are so clear and help me much more than other technicians, is also rare to find someone using the line board as I do 😁.
Hi Alessandro thanks m you do much for your comment. I’m really trying to find a suitable job to video but I’ve had too many ugly jobs or jobs that I haven’t had time to film. Getting another video out to you is my priority trust me. Is there anything you’d like to see?
Thanks Martin
@@dentremover01 Hi Martin, thank you for your reply, i really like how you structure your jobs and your videos and I like your style, everyone work differently but i feel really close to your (same rods, tools, line board etc). I've been trained by Mike toledo and started to work PDR 5 months ago, it's an extremely hard to learn thing, and even with my immense patience sometimes i have days "NO", and really, watch your videos i see where I want to be one day.
I have no specific requests, just see a master in action (possibly for 20+min 😂)
Thanks again Martin, you have a wonderful day
great video, from a master
Hey thanks Thomas! Very happy you enjoyed the repair video
Great job.
Thanks Andy
سلام.بسیار عالی ممنونم از شما❤❤
Thanks again 😊
Waiting here
Thank you Andy, I’m looking forward to its release tomorrow!
Well done 👍🛠🛠🛠🛠🛠🛠🛠🛠
Thanks Luis
Well excellent 👌🇬🇧
Hi Bill, Thank you im very happy you enjoyed the video
Love when they pop like that haha
Scared the crap out of me when it went!
Martin super 👍🇺🇿🇺🇿🇺🇿
Thank you very much 😊🙌🏼
Awesome work and beautiful presentation! I love your crown knock down with leather tip ! Did you make it your self ? The fender pliers is pretty cool too , I've never seen those with such a cool adjustable legs , what brand is it? Thanks
Hi Igor thanks for your kind words, the knock down is called a Cro Carb knock down and I’m not sure you can buy them anymore. The pliers are from B&D tools and there’s 3 types. The one I used in the video is the version 3 and probably the best to have for fender/wing repairs
If you want door edge ones then the V1 or edge pliers are the ones to have
All the best for 2022
Martin
@@dentremover01 thank you !
So Martin , you prefer line board over “Fog “ why is that? Curious? Thanks for your time 👍
Hi Kevin sorry for the wait. I started off with fog but then a Pdr tech gave me a line board and I stuck with it ever since. I still use fog if I repair hail or large dents but I prefer lines to finish off! how about you?
Nice work. Where can i sold this mobile pdr light with strips?
Hi Dominik the light is called an Elim A Dent and you can buy it from Anson tools in the 🇺🇸 and Keco Uk in 🇬🇧
Hope this helps
Thanks Martin
@@dentremover01 thanks
👏🏼👏🏼👏🏼
Thank you
Я не знаю английский язык хорошо , но вы странно на нем говорите)) а так все отлично!)
Where are you based? I could really do with your help .
👍
Thank you
You can tell us… you’re David Copperfield!
Hi Massimo- didn’t you know already?
🔥👍💪
Thank you
Гап йуқ
😶
Once you have the tools this repair is all labor & a few hours for you, I have a body shop just the base coat and clear would be around $300.00 us and two or three days
Hi Walt. Thanks for your comment, yes that’s right if you look at it like that. As your a bodyshop owner like me you can understand that it’s not just free money and that one job contributes to rent, electric, tools, insurance, advertising, wages and the list goes on not to mention the 1000’s spent on training and the years taken to get to this stage. The price of paint for you does cost quite a bit, and then you also need to add a labour cost so you can make a profit.
We are there to repair peoples cars and ultimately make a profit for us to progress
🇷🇺👍
Thank you