HOW TO: 09-14 Ford F150 Column To Console Shifter Conversion!
Вставка
- Опубліковано 4 гру 2024
- Always disconnect power before working around an airbag, and chock wheels when working under a vehicle!
Timestamps:
0:28 Tools & Materials
0:34 Disassembly
0:50 Parts Needed
1:45 Shifter Cable routing
2:30 Column Plugs
3:30 Bottom Plug
4:00 Top Plug
5:10 Truck Harness
5:50 Shifter Harness
6:15 Main Harness To Truck Harness
7:20 Bottom Plug To Shifter Plug Wiring *
8:40 Shifter Cable
11:30 Top Plug To Shifter Plug Wiring *
Tools & Materials:
5.5 , 7 , 8 , 10 mm Sockets
Torx 30 for shifter
pry bar for shifter cables
trim tools
Wire , Cable Ties & Crimp Connectors, or Solder and Soldering Iron
Parts needed:
Shifter
Shifter plugs and harness
Shifter cable
Column shifter block off cover
Man I’ve been looking for this for a WHILE gonna wire mine up!
I just did this conversion a few weeks ago. Its worth it but it's definitely not a simple job if you wanna do it right and it look factory.
@@christophersallee7904 Can you re wire +/- buttons to a floor shifter just meant for manual mode (it isi anoying wheere the buttons are located in the column lever). if not, can be thsi very same process be aply to the Lokar 6R80 Automatic Electronic Sport Mode Shifter? Also, in the replacement, how did you manage the linking cable (the gear selector cable)
I did the full console with heat and matched up to dash and used the floor shift location for switch panels
I was just asking about this for my 2010.
@Raine Lutz where’s the wiring diagrams
dude, amazing video. Question. Can you re wire +/- buttons to a floor shifter just meant for a manual mode (it isi anoying wheere the buttons are located in the column lever). if not, can be thsi very same process be aply to the Lokar 6R80 Automatic Electronic Sport Mode Shifter? Also, in the replacement, how did ypu manage the linking cable (the gear selector cable)
Hey I have a 2010 f150 but my gromit hole is by the Padel will it still work
Did you use a 150 shifter in the SD console ?
Is there a video before this or did this video start in the middle of the entire process?
Do you think this would work going from console shifter to column shifter?
I am wondering this too
Why would you want to?
im actually trying to do the same. hate console shifter, takes alot of space for nothing when i can change gears at column and use the extra space either for a mid seat with storage or custom console with more storage@@keithbrown1915
Is it passable? You can put all the parts together as a kit ship to Taiwan？
I'm trying to convert 1999 ford f150 Lariat from column shift to console shift. having trouble wiring.
How did you hook the lights up?
will this work for 1999 ford f150 column to 2004 console with same shift pattern PRND21 and OD button
Who wants console? I like manspreading hahaha. Good work tho bro, looks oem. Good diy
Thanks man I really appreciate it!
Hey man. Have you figured out the wiring for the bmw e90 sport seats?
So should I follow this step by step or not touch the bottom plug ?
Anyone got anything on putting a lariat or platinum interior in a supercab
I did some looking, and it depends on what seats you currently have. For example, mine has a power driver seat but a manual passenger seat. You can't just swap in power seats and run your own wires. You'll need to replace the lower cab harness and possibly a module to retain power functions. I've been throwing around the idea of swapping the leather platinum seats onto my manual seat rails, but I haven't done much digging.
@@RaineLutz anywhere I can send a photo?
@@cfrimm you can shoot me a message on Instagram at lutz.skunkworks
@@RaineLutzthat’s what i did. you can use the platinum driver seat controls with lower-model power seat harnesses. but for passenger yes i just swapped the leather covers. pain in the ass but so worth it
edit - (if you just plug and play the platinum driver seat controls into the factory lower-trim harness, you will not be able to fold the seat. i’ve learned to live with it. luckily it’s locked at the right angle. you can adjust the tilt angle of the WHOLE seat, just can’t fold the back of the seat :/ )
@brinden that's very useful information. Thank you, I appreciate it. I was hoping you could just swap the rails or something easy like that, so that's good to know.
Anyone know if it is possible to go from Console to Column?
I'd saybits possible as the hardest part is the wiring and it's similar to this. Only issue I see is you'll need the actual mechanism on the column the shifter mounts to. I'm unsure if you can swap it or if you'll need a column shifting column.
@@RaineLutzi have a 2010 expedition and trying to do just that.
first i had to find a ssv epxy with column shifter; then get the whole steering column support or at least the main mid support bracket or whatever it is. then the actual shifter and cable, and last the plastic shroud.
problem is my console shifter has 6 wires where's the column has 5. and also the key lock on mine is electronic whereas the column is mechanical.
I'd if you will get to this but I picked up a 2012 single cab f150 would this work on mine as well?
To my knowledge it should all be the same!
Absolutely. I did my 2013 in 3 hours start to finish. Cut the wires off at the bottom of column shifter extend to the console. 3 wire set to up/down shift button. other 2 to the tow haul. No " harness" needed No idea why he points out the wiring under the ignition switch? DO NOT TOUCH THOSE. Run hot wire when brake is NOT pressed and cold when brake is depressed, it will then release. The lock out solenoid release works only when brake pedal is not depressed other wise it is always inactive. Run a 12v wire that is hot when lights are on. DONE!!! If you want to have outlet ports work run a 12v switched or unswitched wire. I have no idea why people act. like this is so hard.
Anyone know if a company has made a plug and play harness adapter for this mod?
I don’t think so, but I think there’s a forum thread with the plugs you need and it may have a wiring diagram to make a harness
@ where could I find the forum?
@@Twisted_T I’ll have to look and see if I can find it again. There’s another video on here where a guy includes this video and the forum on his works cited
How much would you charge me to do mine 😂😂