I wish my 2013 jumpseat had at least those cup holders and the storage. Mine is a giant leather covered monolith with no openings whatsoever. Definitely looking to do the swap eventually.
Michael Pawlowski I liked the cab light video and this video, I haven't watched your first one yet but those videos are good, I think you should do a walk around of your truck
Just did this swap on my truck and I love it. What wiring harnesses did you need to buy to hook up the electrical components of the console when you did the swap? Thanks for any help!
Hey, i have a few questions, where did you buy the rock light switches? Does it bolt right into the old bracket? and where did you find the center console and plastic trim pieces?
It's out of a higher trim, my buddies 2011 Harley edition has that style of console. You just need to buy one with console shift instead of column shift.
I have a 2009 f150 xlt can i take out the jump seat and add a center console like the one you have like the silver n black that is in the platinum models . where did you get the console from ?
Wesley Conklin I don’t have a factory console but more like a work center custom box that bolts on the actual center seat frame. I’m good if you would like to trade for that.
How did you get the plexi glass to stay and how did you do the light under it ? Also did you have the vinyl cut for the F150 emblem ? Thanks in advanced
Scott Peery I glued it inside the chrome trim, I ran power from an accessory wire for the light and hot glued it to the bottom of the plexiglas, and I printed out the f150 on paper and cut it out to use as a stencil to cut it out of the wrap with a exacto knife.
To get the ac to work on the back of the console, where are you getting the air from? Under the seats? If so, how did you achieve this? This is one of the few things I hate about the xlt’s.
Adam Wulff the vent is under the dash when u remove the trim...you can't miss it, the I went to Menards and got some hvac vent pipe and ran it to the back vents, it's not pretty but it's also underneath the console and you don't see it, but it works great
Hey man I have the 2013 ecoboost xlt model. Trying to get the same center console as you. With the floor shift. I can use just about any model correct. From yeas 09 to 14? All pretty much the same just different color?
Hey, I'm doing this now. Do you know what parts you looked for on car-part? I see the Front Console which gives some model options (which one did you choose?) do you know the name of the media console trim you also had to get? Thanks, looks nice.
mattfca I just found one that was a center console for the 09-14 and looked for the color combo i wanted, u have to search through all of them, as far as the trim pieces went i just called the junk yard i got it from and told them what i was doing and they gave me all the little extra stuff. Really you just need the to pillar trim pieces
I want to do this as well but do I need to get the side covers if I find a console? I have a column shift and everything I see is floor shift but I really don't want to spend extra if I don't have to
were you able to just snap out the 4x4 knob and insert into the air vent panel or what? think mine is on the wrong side. like my fx4 panels are backward or something. could you shed some light on this?
Cheyanne Askins I guess I don't understand what your asking. My 4x4 switch mounted in the same hole on the trim...i know the trim is different for the center consol but everything is in the same place
also have a few other questions about some of the plugs. idk if its easier for me to comment here or talk to you some other way but just let me know. thanks man
for the 12v spots so one inside the console and one in the rear did you have to buy a harness for these or how did you get them to work. also how do i access the air vent on the front dash
Michael, whats the part number for the side trim pieces? I am about to buy a center console for $100. Also are you interested in making a cover plate for the shifter since I have a coluom shifter not a floor one
Derek Hanks honestly I have no idea, when I purchased the console the junk yard just gave them to me, so I would call a junk yard and ask them. they should know. sorry I couldn't be more help
Where did you find the console and was it expensive? I have only been able to find the consoles that dont come all the way up for outrageous prices (i think)
I found an aftermarket that looks like the OEM. A lot more than $90 though. www.4wheelparts.com/p/2012-Ford-F-250-Super-Duty-TuffyTuffy-Security-Console-Insert-(Black)-322-01/_/R-BHRQ-322-01?gclid=Cj0KCQjw6ar4BRDnARIsAITGzlC12HgEPB1bj2vALWVDgBTws-iXvqDZR6OO6ez2y8qD0Jxmffdq8rAaAnTdEALw_wcB&ecmp=s:google_9816045568_102528557440__pla-675663714923_Tuffy_TFY322-01190543_YMM_US&emlprox=out&ppcfon=1&gp=1&ef_id=Cj0KCQjw6ar4BRDnARIsAITGzlC12HgEPB1bj2vALWVDgBTws-iXvqDZR6OO6ez2y8qD0Jxmffdq8rAaAnTdEALw_wcB:G:s&s_kwcid=AL!7836!3!430284196275!!!g!675663714923!&SC%20Shopping%20-%20NTM%20Desktop&ecmp=s:google_9816045568_102528557440__pla-675663714923
Michael Pawlowski thanks man - how did you make the switch plate? The one I'm getting has a hole for the floor shifter but I have a column shifter so I'll need to cover it some how
Michael Pawlowski To get the ac to work on the back of the console, where are you getting the air from? Under the seats? If so, how did you achieve this? This is one of the few things I hate about the xlt’s.
Hey im thanking bout doin this to my truck but dont kn where to begin would like to pick ur brain a lil to get an idea would really appreciate if u could help me out thanks
all it is is a piece of plexi glass that i covered with a vinyl wrap and used the chrome bezzel from the shifter to mount it (its just glued but works great). and i bought the switches from auto zone
I'm interested in doing this on my 2013 f-150, do you think it would be possible to put a second set of cupholders in place of the switches you installed? sort of something similar to the f-250 center console set ups
It can be done. On your old jump seat on the bottom it at slide out cup holders turn over unscrew just cup holders trim edges and put in place of old shifter it is tighter with the chrome trim around hole. Or take out rubber cup holders from that piece and it will make a pocket .
I like how you took the old shifter and made it into switches! I think I'll do the same.
I wish my 2013 jumpseat had at least those cup holders and the storage. Mine is a giant leather covered monolith with no openings whatsoever. Definitely looking to do the swap eventually.
Awesome video! I hate my jump seat in mine and I'm looking at swapping it too. Love the switch idea too
Thx for the vid. Ordered a console off ebay last week and was gonna wing it. Looks pretty easy...especially since I'm not using a flow-thru console.
thanks! first thing i thought of when I bought one used last week. just needed proof of concept
Will A/C flow to the back of the truck thru the console?
Awesome video!! Want to do this exact thing with my 2014 STX. The jump seat sucks!!
Love this! Next modification added to the list
how do I make it so the electric works in the center console? Like the usb ports? where do I plug it into?
I agree with you. I have a 2011. Absolutely hate the middle seat and console. What year can I replace the console with ?
Thanks for your video.
Chris Blore 09-14 all parts are interchangeable
Michael Pawlowski
Thanks Michael, appreciate the information.
Now just have to locate one.
You should post more videos of your truck man, it's awesome
Bodie Breitbach I have a few of them...let me know what you wanna see and I'll make it happen
Michael Pawlowski I liked the cab light video and this video, I haven't watched your first one yet but those videos are good, I think you should do a walk around of your truck
Thanks for the video just did my console conversion
The left and right trim piece where did you order them from ?
Did the 12v from the jump seat plug right in to the 12 on the console or did you get an adapter? Splice it in?
Just did this swap on my truck and I love it. What wiring harnesses did you need to buy to hook up the electrical components of the console when you did the swap? Thanks for any help!
Did you ever find a solution to the wiring?
I'm also curious about the wiring solution
If you found the harness lmk😂
Hey, i have a few questions, where did you buy the rock light switches? Does it bolt right into the old bracket? and where did you find the center console and plastic trim pieces?
How did you plug in the rear 12 volt outlet and the cigarette lighter
also that was just a center console from a 12th gen or it had to be a 2013? and the trim pieces i assume they came from the same truck as well.
Cheyanne Askins its out of a 2011 so I think there all the same but don't quote me
It's out of a higher trim, my buddies 2011 Harley edition has that style of console. You just need to buy one with console shift instead of column shift.
The switches where the shift would go looks really good, did you order them from anywhere? Or did you make it? Any tips?
How it’s not late , but does you the both of the 12v works ? Does the USB from inside the compartments works ?
I purposely bought a 2017 with the middle seat because I occasionally haul 6 people and this is my main vehicle! I have no issues with it at all.
Me too. Plus I like the BIG TABLE as a writing surface. 🤷🏾♂️
I have a 2009 f150 xlt can i take out the jump seat and add a center console like the one you have like the silver n black that is in the platinum models . where did you get the console from ?
the weep hole that you did on the intercoler would it suck particale back in if i would go off rooding in mud
It never has
Can you put a list of everything you to make it work , like the model of the side trim , console and all that !!!!!
Would this work on a supercab
What model console is it? Also what did you do with you center seat? I’m actually looking for a center seat :)
I'm looking to get rid of my Center seat you got a console we can trade
Wesley Conklin I don’t have a factory console but more like a work center custom box that bolts on the actual center seat frame. I’m good if you would like to trade for that.
How did younget the chrom trim to fit around the the rocker switch section
How did you get the plexi glass to stay and how did you do the light under it ? Also did you have the vinyl cut for the F150 emblem ? Thanks in advanced
Scott Peery I glued it inside the chrome trim, I ran power from an accessory wire for the light and hot glued it to the bottom of the plexiglas, and I printed out the f150 on paper and cut it out to use as a stencil to cut it out of the wrap with a exacto knife.
Did your console come with a different bracket? or did the console bolt right up? Thanks
Juan Alcantar it bolted right up
Roughly how much did this cost after the install?
To get the ac to work on the back of the console, where are you getting the air from? Under the seats? If so, how did you achieve this? This is one of the few things I hate about the xlt’s.
Adam Wulff the vent is under the dash when u remove the trim...you can't miss it, the I went to Menards and got some hvac vent pipe and ran it to the back vents, it's not pretty but it's also underneath the console and you don't see it, but it works great
Michael Pawlowski thank you. That’s awesome. I will have to get on this!
What are the vents part called idk how i would look them up
Lower left right bezel side panels
Ford part # 9L3Z1504338CA right side
Left side same number but last to letters Are DB
Hey man thanks for the video , where did you get the console from ?? I can't find one anywhere
Devin Eschette eBay or your local car dismantling
Are the vents on the back of the center console blowing ac Or do they not work?
Cesar Martinez I had to fabricate a flowthrough for them to work
Beast!
Michael Pawlowski hey PLEASE HELP ME ACHIEVE THIS FOR MY 2010!!!!! I HATE that dame jump seat!!!!!!!!
SouthMemphis M45 what do you need to know?
What did you use to fabricate the vents? And how did you do the piece for the shifter did you buy one piece?
Hi Michael where did you order this console?
Hey man I have the 2013 ecoboost xlt model. Trying to get the same center console as you. With the floor shift. I can use just about any model correct. From yeas 09 to 14? All pretty much the same just different color?
Chad Martin yeah
Hey, I'm doing this now. Do you know what parts you looked for on car-part? I see the Front Console which gives some model options (which one did you choose?) do you know the name of the media console trim you also had to get? Thanks, looks nice.
mattfca I just found one that was a center console for the 09-14 and looked for the color combo i wanted, u have to search through all of them, as far as the trim pieces went i just called the junk yard i got it from and told them what i was doing and they gave me all the little extra stuff. Really you just need the to pillar trim pieces
I want to do this as well but do I need to get the side covers if I find a console? I have a column shift and everything I see is floor shift but I really don't want to spend extra if I don't have to
My counsel came with the side covers so I guess it depends on the seller. I picked mine up from a scrap yard
were you able to just snap out the 4x4 knob and insert into the air vent panel or what? think mine is on the wrong side. like my fx4 panels are backward or something. could you shed some light on this?
Cheyanne Askins I guess I don't understand what your asking. My 4x4 switch mounted in the same hole on the trim...i know the trim is different for the center consol but everything is in the same place
also have a few other questions about some of the plugs. idk if its easier for me to comment here or talk to you some other way but just let me know. thanks man
Cheyanne Askins this is fine it might help other people
for the 12v spots so one inside the console and one in the rear did you have to buy a harness for these or how did you get them to work. also how do i access the air vent on the front dash
Michael, whats the part number for the side trim pieces? I am about to buy a center console for $100. Also are you interested in making a cover plate for the shifter since I have a coluom shifter not a floor one
Derek Hanks honestly I have no idea, when I purchased the console the junk yard just gave them to me, so I would call a junk yard and ask them. they should know. sorry I couldn't be more help
Where did you get the center console?
Where did you find the console and was it expensive? I have only been able to find the consoles that dont come all the way up for outrageous prices (i think)
Car-part.com and you have to ask them for the trim pieces for it, I only paid 90 for the whole thing
I found an aftermarket that looks like the OEM. A lot more than $90 though.
www.4wheelparts.com/p/2012-Ford-F-250-Super-Duty-TuffyTuffy-Security-Console-Insert-(Black)-322-01/_/R-BHRQ-322-01?gclid=Cj0KCQjw6ar4BRDnARIsAITGzlC12HgEPB1bj2vALWVDgBTws-iXvqDZR6OO6ez2y8qD0Jxmffdq8rAaAnTdEALw_wcB&ecmp=s:google_9816045568_102528557440__pla-675663714923_Tuffy_TFY322-01190543_YMM_US&emlprox=out&ppcfon=1&gp=1&ef_id=Cj0KCQjw6ar4BRDnARIsAITGzlC12HgEPB1bj2vALWVDgBTws-iXvqDZR6OO6ez2y8qD0Jxmffdq8rAaAnTdEALw_wcB:G:s&s_kwcid=AL!7836!3!430284196275!!!g!675663714923!&SC%20Shopping%20-%20NTM%20Desktop&ecmp=s:google_9816045568_102528557440__pla-675663714923
We're you able to wire up the cigarette lighter in the back from the old harness? Thanks.
erichabib70 I was but it was not as easy as just plugging it it, had to splice into it.
I hate the middle seat too in my ford 150
Do you still have your old jump seat?
I am looking for a tan centerconsole
You think I could do something like this on a 2004 ford lariat?
where do you buy part to replace and part number?
I'm gonna put a 12" sub box there
I literally just wanna swap out the backrest because i don't have any cup holders
Lol. Mine doesn't either!
What did the console come out of?
Did you have to mod anything for the ac to go to the back?
Derek Hanks yeah you have to get an adapter but I just used some flexible hvac pipe from menards
Michael Pawlowski thanks man - how did you make the switch plate? The one I'm getting has a hole for the floor shifter but I have a column shifter so I'll need to cover it some how
Derek Hanks plexi glass, cut the holes out for the switches and lined it with black vinyl. used silicone to hold it to the chrome trim
Michael Pawlowski To get the ac to work on the back of the console, where are you getting the air from? Under the seats? If so, how did you achieve this? This is one of the few things I hate about the xlt’s.
Cool!!
Hey im thanking bout doin this to my truck but dont kn where to begin would like to pick ur brain a lil to get an idea would really appreciate if u could help me out thanks
Tell me you live in Texas, could use some help achieving this.
How'd you make that cover with the switches?
all it is is a piece of plexi glass that i covered with a vinyl wrap and used the chrome bezzel from the shifter to mount it (its just glued but works great). and i bought the switches from auto zone
What if ur have the 4x4 shafter in the floor
Jamie Jordan then u cant do it unless you modified something for it to work
could you do this on an extended cab?
Rhost Gider I don't see why you couldn't your not messing with anything in the back seat
Preciate it
Jake Riley yes it’ll definitely work while still having leg room for the rear passengers
how much did you spend if you don't mind?
Maybe just over 120 if u count the wires, switches, plexus glass, and center console I can't complain
Michael Pawlowski oh wow. That’s super cheap. I can’t find a console for less than $500. Where did you get the console?
Ethan Sonnier car-part.com
Super helpful. Thanks!
Did you put on seat covers at the end? Look like leather seats
Hey by chance what did you do with the harness that comes with flow through console that runs media ports and charging ports?
Michael spangler you need it to hook up the new counsel
I'm interested in doing this on my 2013 f-150, do you think it would be possible to put a second set of cupholders in place of the switches you installed? sort of something similar to the f-250 center console set ups
Daniel Vance I'm sure, I thought about it just have to find it. There's nothing under it so I think it would be pretty easy
It can be done. On your old jump seat on the bottom it at slide out cup holders turn over unscrew just cup holders trim edges and put in place of old shifter it is tighter with the chrome trim around hole. Or take out rubber cup holders from that piece and it will make a pocket .
no lost of boost
i wonted to know becoss i just bought a 2012 ford f-150 ecoboost 3.5l v6
I’ll buy that seat from you!
Still interested just removed mine
@@pedroarvizu3650 do you still have your middle seat? What color is it?
@@vitaliyburyakov1786 Mine is light grey, its coming out next week if you are still looking.
If you could walk me through in how to do this on facetime or zoom id pay you for it
left out many steps
Center console is stupid,
Yo can you help me with this do you have another contact like ig or Facebook or anything