Pioneer DMH-2600NEX - What's in the Box?
Вставка
- Опубліковано 20 сер 2024
- In this Unboxing Video, you'll learn about the Pioneer DMH-2600NEX AM/FM Digital Media in-dash receiver with a 6.8 inch capacitive glass touch screen What's in the box, and what's on the back panel.
You can find more videos about the Pioneer DMH-2600NEX in this You Tube playlist: • How To - Understanding...
You can find more information about Pioneer DMH-2600NEX here: www.pioneerele...
You can find the Owner's Manual for Pioneer DMH-2600NEX here: www.pioneerele...
You can find more information about Pioneer NEX in-dash receivers here: www.pioneerele...
Follow Pioneer on facebook / pioneernorthamerica
Join the conversation with Pioneer on Twitter / pioneerusa
Follow Pioneer on Instagram / pioneercaraudio
Just bought 1,cant wait to get it up and running
You can learn more about wiring your Pioneer DMH-2600NEX here: ua-cam.com/video/-bF3uzzaT30/v-deo.html You can find a full playlist of How To videos about Pioneer NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
just got one today, good stuff!
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: ua-cam.com/video/kpKYks-17gM/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
como te va con el brillo y el contraste en el dia? lo estoy considerando por que compre un nakamichi, y no me convence el brillo de la pantalla, y ando viendo si me compro este
@@segmtynoreste6841 The in-dash receiver's display is not brighter than the sun. Depending upon the sun's position in the sky, there will be moments you'll see reflected glare and it will be difficult to see the screen. Most of the time you can see the screen without troubles. You can adjust the brightness of the screen for day time and night time viewing as seen in this How To video from Pioneer: ua-cam.com/video/UaGlwjkZVo4/v-deo.html
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Just bought one, hooked it works fine except I have to always initiate bluetooth because it doesn't do it automatically
If you're saying that you have to manually pair your phone to the Pioneer DMH-2600NEX each time you start your vehicle, that's not normal operation for the receiver. I think you may have a setting incorrect. First, please be sure you phone is not connected to another device like a headset or a portable speaker. This can block the in-dash receiver from connecting. Next, be sure to check the Auto Connect, and Visibility settings on the in-dash receiver. You want them both set to On. You can see it here:ua-cam.com/video/zZRA8sNz6gs/v-deo.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Can you play videos from your phone such as Netflix or UA-cam?
? I had my pioneer 2400nex installed but for some reason when connecting my usb for Apple car play makes a low static sound everything was installed just fine
If you had the in-dash receiver professionally installed, you should visit your installer and explain the issue.
If you have the Pioneer AVH-2400NEX, this product was manufactured back in 2016. There could be trouble with the USB extension cable worn or failing. I recommend to try a different cable to connect Apple CarPlay. This may require you to access the back of the in-dash receiver, to replace the USB extension cable.
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: ua-cam.com/video/WY0GLsC3AxE/v-deo.html
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Just a shame pioneer haven’t put the usb socket at the front panel as yet!
If you want a Pioneer receiver with the USB on the front check out this one: ua-cam.com/video/sZrT4594McQ/v-deo.html
Here's another idea, I recommend installing the USB cable when you do you the installation of the in-dash receiver. When you have the dash taken apart, install the cable so that you have easy access to the USB cable in the center console or the glove box or some other easy access place in your vehicle. When you're not using the USB cable it's out of the way and it's not an ugly mess hanging off the dash. In addition, not having the USB port on the front means there is more room for a bigger video screen. You can find more videos about Pioneer NEX receivers here: ua-cam.com/video/kpKYks-17gM/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
That's a good thing.
I don't want the USB port on the front of the unit. Install the USB cable on the rear of the unit as they designed so that you do not have to look at the cable. Why would you want a cable hanging from the front of your car stereo?
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: ua-cam.com/video/3t9zCiIGO7M/v-deo.html And you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Won’t let me use WebLink on this pioneer radio .
Doesn’t let me push ok when the message says apply brake -release brake-and apply brake again
Still won’t let me hit ok
A couple questions. What phone do you have? What model of Pioneer in-dash receiver do you have? Is your phone connected directly to the in-dash receiver through USB? Do you have the Weblink Host app on installed on your phone? Here is a video about setting up the Weblink Host app on an Android phone on the Pioneer DMH-2600NEX: ua-cam.com/video/SQNnFQvqKoY/v-deo.html Here is video about setting up the Weblink Host app on an iPhone: ua-cam.com/video/TK-MZe4NdAI/v-deo.html You'll need to engage the vehicle's Parking Brake in an ON-OFF-ON operation to see video on the screen. This might also be called an Emergency Brake, or a Hand Brake. If you engage the Parking Brake and still can't see video, your vehicle may have an incorrect connection to the Green Parking Brake Wire on the in-dash receiver. You can learn more about the Green Parking Brake Wire in this Pioneer Wire Harness video: ua-cam.com/video/-bF3uzzaT30/v-deo.html You can see it operate in this video: ua-cam.com/video/G5hyqr2LyA4/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
My pioneer DMH 2600 Nex radio turns off and on again when I start the vehicle, we check all the connections and they are correct, this fault is very annoying, what should I do?
Please provide more detail with your question. If you have the receiver switched on with the vehicle's key in the accessory position, ( and the vehicle is not running) it's normal operation for the receiver to restart when the vehicle is started. This is normal operation. You can learn more about wiring your Pioneer receiver in this How To video from Pioneer: ua-cam.com/video/-bF3uzzaT30/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
We need a 4660nex video
You'll have one soon. Until then please take a look at the Pioneer DMH-WT8600NEX here: ua-cam.com/video/QrvNkGgRo7E/v-deo.html The Pioneer DMH-4660NEX is the 2 DIN version of this receiver. Nearly identical feature set except for the HD video screen. You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Deckerd Otto thanks man! I like the 8600, I wonder what it would look like in my dash with that screen
What's the difference between this and the 2660?
You can learn more about the Pioneer DMH-2660NEX here: ua-cam.com/video/h7FDCI7NVv4/v-deo.html The Pioneer DMH-2660NEX has built-in HD Radio, 2 camera inputs, and includes a wireless remote control. 2600 does not. You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
I recently bought the MVH-S21BT and installed it as the manual says. But the radio does not want to link to the Bluetooth of my cell phone. It only says: Error: Unable to establish a link.
It is new has nothing of previous connections in the Bluetooth memory.
Power your phone off and back on.
Make sure your phone has the Bluetooth switched on.
Make sure your phone is NOT actively connected to other Bluetooth devices like a headset or a portable speaker. This may block in the in dash receiver from connecting to the phone.
Open the Bluetooth window on your phone. This will make the phone visible to other Bluetooth devices.
Make sure no other phones are actively connected to the in dash receiver when you attempt to pair a new phone. On the in dash receiver, make sure Bluetooth visibility is switched on.
Here is a video explaining how to pair your iPhone to a similar Pioneer in-dash receiver: ua-cam.com/video/Fm2U1Ck1qlU/v-deo.html
Here is a video explaining how to pair your Android Phone to a similar Pioneer in-dash receiver: ua-cam.com/video/8t8hiqq2kCI/v-deo.html
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Is this model a shallow mount? If not, what is the depth of the radio? According to Crutchfield, it's too deep for my car.
The DMH-2600NEX is a full depth chassis about 6.5 inches deep. If you need a shallow chassis, please check out the Pioneer DMH-W4660NEX. You can see it here: ua-cam.com/video/B2TTfJUD-es/v-deo.html Or the Pioneer DMH-C2550NEX here: ua-cam.com/video/681zifX01OA/v-deo.html or the DMH-C5500NEX seen here: ua-cam.com/video/Qtvk7Hv6ur4/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Been having trouble with my 2660NEX, it is shutting off at high volume. I’ve checked all the wires on the back and all the wires to my speakers. When I looked online I saw it could be a Bluetooth error because on FM I can go as loud as I want. But I can’t find any firmware updates for my model. What do I do?
If this issues exists on the Bluetooth Audio source only, focus on the Bluetooth Audio Source. 1. Check the SLA setting when you are on the Bluetooth Audio source. Set the SLA function to - 4. You can learn more about the SLA function in this video: ua-cam.com/video/Z86fQryoRVk/v-deo.html 2. Adjust the volume on the phone that is playing the Bluetooth Music source. It may be overloading the inputs on the receiver. The Phone's volume control should be set to 50-75% at the highest. After you adjust the phone's volume control, adjust the in-dash receiver's volume control. If you are looking to make your audio system louder and keep the music clean and clear at high volume, please consider getting an amplifier. You can learn more about Pioneer amplifiers here: ua-cam.com/video/99Hfmc8QxVc/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Does it charge your phone when its plugged into the USB?
Yes, the Pioneer DMH-2600NEX will charge your phone when it's plugged in through USB. You can find more How To video about Pioneer NEX in-dash receivers here: ua-cam.com/video/kpKYks-17gM/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Does this unit have network mode?
Yes, the Pioneer DMH-2600NEX can be setup in 3-way Network Mode or in 2-way Standard Mode. You can learn more about Pioneer Network Mode and Standard Mode setup here: ua-cam.com/video/PeH_h8UHzBw/v-deo.html and here: ua-cam.com/video/WvJXYh6vk_0/v-deo.html You can find a full playlist of How To videos about Pioneer NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
@@deckerdotto6035 can the mvh-1400 nex be used in network mode? Thanks.
Yes, the Pioneer MVH-1400NEX will also work in Standard Mode or in Network Mode. You can find the unboxing video for Pioneer MVH-1400NEX here: ua-cam.com/video/QKH0xW3P-Bg/v-deo.html You can find a full playlist of How To videos about Pioneer NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Can you add a custom wallpaper to this unit?
Yes, you can add a custom background image to the Pioneer DMH-2600NEX. You can see it explained clearly in this How To video from Pioneer: ua-cam.com/video/ObpKXwrN8us/v-deo.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: ua-cam.com/video/_P3_aPDLK2E/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
how do you update the firmware for this model?
As of 2022 July, Pioneer has not issued a firmware update for the Pioneer DMH-2600NEX.
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Is this the latest pioneer double din stereo?
The Pioneer DMH-2600NEX is a 2020 model and is a current model in Pioneer's lineup as of 2021 January. As is the Pioneer DMH-2660NEX seen here: ua-cam.com/video/h7FDCI7NVv4/v-deo.html Other Pioneer 2 DIN NEX receivers released in 2020 are shown in this Pioneer video: ua-cam.com/video/Y-lL_eIB3Ug/v-deo.html You can find more videos about Pioneer NEX in-dash receivers here: ua-cam.com/video/NI-_jpMRtEA/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Hi, this can be fit anf work in 360 camera and cross control for np300 navara 2018 model
To make this type of camera system work with the camera input on the Pioneer receiver, you'll need to use the idatalink Maestro RR2 OEM integration unit. You'll need to do some research to determine if your vehicle is supported. You can learn more about Maestro RR2 here: maestro.idatalink.com/ You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Is this compatible with a 2009 Honda Civic ?
The Pioneer DMH-2600NEX will fit into many 2009 Honda Civic models with the use of a proper dash installation kit. There are many varieties of 2009 Honda Civic, with and without navigation systems and you did not provide much detail in your question. For wireless Apple CarPlay and Wireless Android Auto you might also consider the Pioneer DMH-W4600NEX seen here: ua-cam.com/video/NI-_jpMRtEA/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
@@deckerdotto6035 I recently purchased the pioneer 6.8 WVGA DMH-2660NEX with dash kit. But when I checked to see compatibility with my 09’ civic lx, it said it wasn’t. Is that true?
The Pioneer DMH-2660NEX is a Pioneer standard 2 DIN receiver. If the dash kit is designed for that vehicle and it fit's other Pioneer 2 DIN receivers it will work with the DMH-2660NEX as well. I'm not sure what dash kit you have. Here is one example of a dash kit for a 2009 Honda Civic LX: metraonline.com/vfgapi/vehicle/94861? You can find a full playlist of How To videos about Pioneer NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
@@deckerdotto6035 thank you!
No remote .... that sucksv
Great news! You can get the same receiver with a remote control in the box. The DMH-2660NEX. You can see the unboxing video here: ua-cam.com/video/h7FDCI7NVv4/v-deo.html
Or you can buy a remote control for your receiver here: www.pioneerelectronics.com/PUSA/Car/Accessories/Remote-Controls/CD-R55
You can find a full playlist of How To videos from Pioneer about similar NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Eh iOS?
Please be more specific with your question.
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Apple car play don’t work with iPhone 11 Pro max🤦🏽♂️🤦🏽♂️🤦🏽♂️
What model number of Pioneer in-dash receiver do you have? I recommend to restart your iPhone and plug it in again. If it still won't connect to Apple CarPlay try a different cable for the connection. If you are using a USB extension, or USB flush mount adapter remove it from connection and try again. You can learn more about Apple CarPlay on a Pioneer NEX in-dash receiver here: ua-cam.com/video/_P3_aPDLK2E/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Deckerd Otto I have the dmh-2660nex ando tried a lot of things and is not working still I even brought a adapter for the original apple cable to plug into it n still nothing idk what to do any more
Here are a few questions and suggestions. Please answer my questions in detail. I'm not with you to see what you're doing. If you don't give me details, I can't help.
There is a lot of detail in this note. Please read all it carefully.
First, Are you certain you are plugging the USB cable directly into the back of the Pioneer DMH-2660NEX? Or are you plugging your phone cable into a USB port somewhere in the vehicle?
Second, not all cables are created equal. Just because a cable will charge a phone, does not mean it will carry data through to the phone and receiver. You said you bought an adapter for the original apple cable. What type of adapter? Are you certain that the adapter can transfer data? And not just charge the phone? If you bought the adapter for a dollar at a gas station, it probably won't work. I strongly recommend that you try a high quality USB type A to Apple Lightning cable for your connection and plug it directly into the back of the in-dash receiver. No extension cable, and no car USB port.
Are you using any type of USB extension cable to connect to the receiver? Any type of USB Flush Mount adapter installed in the vehicle? If so, remove them and plug directly into the back of the receiver.
When you plug in the phone, wait for 30 seconds. Next, on the in-dash receiver, touch the Home button at the top. You should see a phone tile on the bottom left of the receiver screen. Touch the phone tile. Select Apple CarPlay.
Have you tried this phone on different CarPlay enabled receiver? Does it work?
If not, are you certain that CarPlay is enabled on the phone?
To check, do this:
Is CarPlay enabled on the iPhone?
Go to Settings, then General. Does CarPlay appear?
If it does, select CarPlay and see if it shows any devices. Note Very Important: Clear any devices stored.
If not, CarPlay needs to be enabled.
On the phone:
Go to Settings
Go to Screen Time
Go to Content & Privacy Restrictions
If you have this turned on, you need to go into the Allowed Apps section and allow CarPlay.
Now when you go back to the General settings, you should see CarPlay.
Next Restart the phone.
Next Make sure the phone is NOT CONNECTED to the in-dash receiver and Do a Restore All Settings on the in-dash receiver. You can see it here: ua-cam.com/video/OMJ5yJ6157g/v-deo.html
Next plug the iPhone directly into the back of the receiver using a High Quality USB A to Apple Lightning cable. When you plug in the phone, wait for 30 seconds. Next, on the in-dash receiver, touch the Home button at the top. You should see a phone tile on the bottom left of the receiver screen. Touch the phone tile. Select Apple CarPlay.
what is the difference between a DMH-2600NEX and the DMH-2660NEX?
The Pioneer DMH-2660NEX has built in HD Radio, a 2nd camera input, and a wireless remote control. The DMH-2600NEX does not. You can find more How To videos about Pioneer NEX in-dash receivers here: ua-cam.com/video/kpKYks-17gM/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics